Page 1 sur 1

[Tuner TNT]Pb de configuration WinTV Nova TD500 (en cours)

Publié : jeu. 16 sept. 2010, 10:15
par Minux
Bonjour à tous,

J'ai besoin d'aide car je sais plus ou chercher, j'arrive pas à faire fonctionner ma carte Tuner, une hauppauge WinTV Nova-TD500.

La carte fonctionne et scan bien les chaines sous Windows, mais sous Arch, impossible de scanner quoi que ce soit, d'ailleurs je la vois même pas comme source DVB sous Kaffeine :/

La carte à l'air de fonctionner pourtant :

Code : Tout sélectionner

$ dmesg | grep dvb
dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: Hauppauge Nova-TD-500 (84xxx) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
et le double tuner à l'air bien reconnu :

Code : Tout sélectionner

$ls /dev/dvb/
adapter0  adapter1
Mais quand je scanne les chaines pour créer mon channels.conf, il trouve rien (je pointe vers le Pic du Midi, j'ai donc recréé le fr-Toulouse-Midi à la main, grace à la méthode expliquée sur cette page, qui correspond exactement à l'exmple) :

Code : Tout sélectionner

$scan fr-Toulouse-Midi > channels.conf
scanning fr-Toulouse-Midi
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 738167000 0 2 9 3 1 0 0
initial transponder 690167000 0 2 9 3 1 0 0
initial transponder 706167000 0 2 9 3 1 0 0
initial transponder 482167000 0 2 9 3 1 0 0
initial transponder 514167000 0 2 9 3 1 0 0
initial transponder 594167000 0 2 9 3 1 0 0
>>> tune to: 738167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 690167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 690167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 706167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 706167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 482167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 482167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 514167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 514167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 594167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 594167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
dumping lists (0 services)
Done.
Je sais plus ou chercher ...

Help ! :pleure:

Re: [Tuner TNT]Pb de configuration WinTV Nova TD500 (en cours)

Publié : ven. 17 sept. 2010, 10:53
par Minux
Personne n'a d'idée ? :(

Re: [Tuner TNT]Pb de configuration WinTV Nova TD500 (en cours)

Publié : ven. 17 sept. 2010, 20:45
par FoolEcho
Je n'y connais strictement rien mais comme je suis un brin curieux... il y a ce fil sur le forum d'Ubuntu avec quelques pistes, dès fois que ça puisse te servir: http://forum.ubuntu-fr.org/viewtopic.php?id=286929

Je ne peux pas faire plus en ce qui me concerne. :|