Page 1 sur 1

[compiz] compiz fait sauter ma session (résolu étrange... )

Publié : sam. 09 oct. 2010, 18:06
par peuks
plop !

Depuis hier compiz me fait sauter ma session ( il quitte ) sans trop que je sache pourquoi... Je suis en compiz standalone. Pensez vous a une mauvaise mise à jour ?

Re: [compiz] compiz me fait sauter ma session (en cours )

Publié : dim. 10 oct. 2010, 23:38
par mélodie
peuks a écrit :Pensez vous a une mauvaise mise à jour ?
Salut,
Regardes dans /var/log/pacman.log, tu devrais trouver la réponse.

Re: [compiz] compiz me fait sauter ma session (en cours )

Publié : jeu. 04 nov. 2010, 22:41
par banditblue
pareil pour moi

je viend de reformatter mon pc afin d'avoir une base propre et installer compiz
lorsque je lance dans le terminal xterm fusion-icon j'ai l'icone bleu de compiz qui se met dans la barre fbpanel puis le pc s'éteint
j'ai une grosse erreur apres le redemarrage de celui-ci mais pas de compiz
sachant que j'ai une carte Gygabite Nvidia FX 7600 GT

Code : Tout sélectionner

[  2972.579] 
X.Org X Server 1.9.2
Release Date: 2010-10-30
[  2972.629] X Protocol Version 11, Revision 0
[  2972.646] Build Operating System: Linux 2.6.35-ARCH x86_64 
[  2972.662] Current Operating System: Linux Pc 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 21:22:26 CEST 2010 x86_64
[  2972.679] Kernel command line: root=/dev/disk/by-uuid/6bd9fde0-30bb-45db-908f-6ecdce3d12de ro vga=792
[  2972.697] Build Date: 01 November 2010  10:19:41PM
[  2972.714]  
[  2972.731] Current version of pixman: 0.18.4
[  2972.748] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2972.782] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2972.834] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov  4 22:21:01 2010
[  2972.851] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2972.868] (==) No Layout section.  Using the first Screen section.
[  2972.868] (==) No screen section available. Using defaults.
[  2972.868] (**) |-->Screen "Default Screen Section" (0)
[  2972.868] (**) |   |-->Monitor "<default monitor>"
[  2972.868] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  2972.868] (**) |   |-->Device "Default nvidia Device"
[  2972.868] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2972.868] (==) Automatically adding devices
[  2972.869] (==) Automatically enabling devices
[  2972.869] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  2972.869] 	Entry deleted from font path.
[  2972.869] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  2972.869] 	Entry deleted from font path.
[  2972.869] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  2972.869] 	Entry deleted from font path.
[  2972.869] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  2972.869] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2972.869] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2972.869] (II) Loader magic: 0x7d3360
[  2972.869] (II) Module ABI versions:
[  2972.869] 	X.Org ANSI C Emulation: 0.4
[  2972.869] 	X.Org Video Driver: 8.0
[  2972.869] 	X.Org XInput driver : 11.0
[  2972.869] 	X.Org Server Extension : 4.0
[  2972.870] (--) PCI:*(0:1:0:0) 10de:0391:1458:3417 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[  2972.870] (II) Open ACPI successful (/var/run/acpid.socket)
[  2972.870] (II) LoadModule: "extmod"
[  2972.870] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  2972.870] (II) Module extmod: vendor="X.Org Foundation"
[  2972.870] 	compiled for 1.9.2, module version = 1.0.0
[  2972.870] 	Module class: X.Org Server Extension
[  2972.870] 	ABI class: X.Org Server Extension, version 4.0
[  2972.870] (II) Loading extension MIT-SCREEN-SAVER
[  2972.870] (II) Loading extension XFree86-VidModeExtension
[  2972.870] (II) Loading extension XFree86-DGA
[  2972.870] (II) Loading extension DPMS
[  2972.870] (II) Loading extension XVideo
[  2972.870] (II) Loading extension XVideo-MotionCompensation
[  2972.870] (II) Loading extension X-Resource
[  2972.870] (II) LoadModule: "dbe"
[  2972.870] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  2972.870] (II) Module dbe: vendor="X.Org Foundation"
[  2972.870] 	compiled for 1.9.2, module version = 1.0.0
[  2972.870] 	Module class: X.Org Server Extension
[  2972.870] 	ABI class: X.Org Server Extension, version 4.0
[  2972.870] (II) Loading extension DOUBLE-BUFFER
[  2972.870] (II) LoadModule: "glx"
[  2972.870] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2972.880] (II) Module glx: vendor="NVIDIA Corporation"
[  2972.880] 	compiled for 4.0.2, module version = 1.0.0
[  2972.880] 	Module class: X.Org Server Extension
[  2972.880] (II) NVIDIA GLX Module  260.19.12  Fri Oct  8 11:41:55 PDT 2010
[  2972.880] (II) Loading extension GLX
[  2972.880] (II) LoadModule: "record"
[  2972.881] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  2972.881] (II) Module record: vendor="X.Org Foundation"
[  2972.881] 	compiled for 1.9.2, module version = 1.13.0
[  2972.881] 	Module class: X.Org Server Extension
[  2972.881] 	ABI class: X.Org Server Extension, version 4.0
[  2972.881] (II) Loading extension RECORD
[  2972.881] (II) LoadModule: "dri"
[  2972.881] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  2972.881] (II) Module dri: vendor="X.Org Foundation"
[  2972.881] 	compiled for 1.9.2, module version = 1.0.0
[  2972.881] 	ABI class: X.Org Server Extension, version 4.0
[  2972.881] (II) Loading extension XFree86-DRI
[  2972.881] (II) LoadModule: "dri2"
[  2972.881] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  2972.881] (II) Module dri2: vendor="X.Org Foundation"
[  2972.881] 	compiled for 1.9.2, module version = 1.2.0
[  2972.881] 	ABI class: X.Org Server Extension, version 4.0
[  2972.881] (II) Loading extension DRI2
[  2972.881] (II) LoadModule: "nvidia"
[  2972.881] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  2972.882] (II) Module nvidia: vendor="NVIDIA Corporation"
[  2972.882] 	compiled for 4.0.2, module version = 1.0.0
[  2972.882] 	Module class: X.Org Video Driver
[  2972.882] (II) NVIDIA dlloader X Driver  260.19.12  Fri Oct  8 11:19:20 PDT 2010
[  2972.882] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  2972.882] (--) using VT number 8

[  2972.914] (II) Loading sub module "fb"
[  2972.914] (II) LoadModule: "fb"
[  2972.914] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2972.914] (II) Module fb: vendor="X.Org Foundation"
[  2972.914] 	compiled for 1.9.2, module version = 1.0.0
[  2972.914] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2972.914] (II) Loading sub module "wfb"
[  2972.914] (II) LoadModule: "wfb"
[  2972.914] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  2972.914] (II) Module wfb: vendor="X.Org Foundation"
[  2972.914] 	compiled for 1.9.2, module version = 1.0.0
[  2972.914] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2972.914] (II) Loading sub module "ramdac"
[  2972.914] (II) LoadModule: "ramdac"
[  2972.914] (II) Module "ramdac" already built-in
[  2972.915] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  2972.915] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  2972.915] (==) NVIDIA(0): RGB weight 888
[  2972.915] (==) NVIDIA(0): Default visual is TrueColor
[  2972.915] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  2972.915] (**) NVIDIA(0): Option "NoLogo" "True"
[  2972.915] (**) NVIDIA(0): Enabling RENDER acceleration
[  2972.915] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[  2972.915] (II) NVIDIA(0):     enabled.
[  2973.437] (II) NVIDIA(0): NVIDIA GPU GeForce 7600 GT (G73) at PCI:1:0:0 (GPU-0)
[  2973.437] (--) NVIDIA(0): Memory: 262144 kBytes
[  2973.437] (--) NVIDIA(0): VideoBIOS: 05.73.22.39.00
[  2973.437] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  2973.437] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[  2973.437] (--) NVIDIA(0): Connected display device(s) on GeForce 7600 GT at PCI:1:0:0
[  2973.437] (--) NVIDIA(0):     Samsung SyncMaster (DFP-0)
[  2973.437] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[  2973.437] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[  2973.437] (II) NVIDIA(0): Assigned Display Device: DFP-0
[  2973.437] (==) NVIDIA(0): 
[  2973.437] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  2973.437] (==) NVIDIA(0):     will be used as the requested mode.
[  2973.437] (==) NVIDIA(0): 
[  2973.437] (II) NVIDIA(0): Validated modes:
[  2973.438] (II) NVIDIA(0):     "nvidia-auto-select"
[  2973.438] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[  2973.438] (--) NVIDIA(0): DPI set to (92, 88); computed from "UseEdidDpi" X config
[  2973.438] (--) NVIDIA(0):     option
[  2973.438] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[  2973.438] (--) Depth 24 pixmap format is 32 bpp
[  2973.440] (II) NVIDIA(0): Initialized GPU GART.
[  2973.453] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[  2973.580] (II) Loading extension NV-GLX
[  2973.609] (II) NVIDIA(0): Initialized OpenGL Acceleration
[  2973.615] (==) NVIDIA(0): Disabling shared memory pixmaps
[  2973.615] (II) NVIDIA(0): Initialized X Rendering Acceleration
[  2973.615] (==) NVIDIA(0): Backing store disabled
[  2973.615] (==) NVIDIA(0): Silken mouse enabled
[  2973.615] (==) NVIDIA(0): DPMS enabled
[  2973.616] (II) Loading extension NV-CONTROL
[  2973.616] (II) Loading extension XINERAMA
[  2973.616] (II) Loading sub module "dri2"
[  2973.616] (II) LoadModule: "dri2"
[  2973.616] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[  2973.616] (II) NVIDIA(0): [DRI2] Setup complete
[  2973.616] (==) RandR enabled
[  2973.616] (II) Initializing built-in extension Generic Event Extension
[  2973.616] (II) Initializing built-in extension SHAPE
[  2973.616] (II) Initializing built-in extension MIT-SHM
[  2973.616] (II) Initializing built-in extension XInputExtension
[  2973.616] (II) Initializing built-in extension XTEST
[  2973.616] (II) Initializing built-in extension BIG-REQUESTS
[  2973.616] (II) Initializing built-in extension SYNC
[  2973.616] (II) Initializing built-in extension XKEYBOARD
[  2973.616] (II) Initializing built-in extension XC-MISC
[  2973.616] (II) Initializing built-in extension SECURITY
[  2973.616] (II) Initializing built-in extension XINERAMA
[  2973.616] (II) Initializing built-in extension XFIXES
[  2973.616] (II) Initializing built-in extension RENDER
[  2973.616] (II) Initializing built-in extension RANDR
[  2973.616] (II) Initializing built-in extension COMPOSITE
[  2973.616] (II) Initializing built-in extension DAMAGE
[  2973.618] (II) Initializing extension GLX
[  2973.739] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  2973.739] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2973.739] (II) LoadModule: "evdev"
[  2973.739] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2973.739] (II) Module evdev: vendor="X.Org Foundation"
[  2973.739] 	compiled for 1.9.0, module version = 2.5.0
[  2973.739] 	Module class: X.Org XInput Driver
[  2973.739] 	ABI class: X.Org XInput driver, version 11.0
[  2973.739] (**) Power Button: always reports core events
[  2973.739] (**) Power Button: Device: "/dev/input/event3"
[  2973.746] (--) Power Button: Found keys
[  2973.746] (II) Power Button: Configuring as keyboard
[  2973.746] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  2973.746] (**) Option "xkb_rules" "evdev"
[  2973.746] (**) Option "xkb_model" "evdev"
[  2973.746] (**) Option "xkb_layout" "fr"
[  2973.779] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  2973.779] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2973.779] (**) Power Button: always reports core events
[  2973.779] (**) Power Button: Device: "/dev/input/event2"
[  2973.786] (--) Power Button: Found keys
[  2973.786] (II) Power Button: Configuring as keyboard
[  2973.786] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  2973.786] (**) Option "xkb_rules" "evdev"
[  2973.786] (**) Option "xkb_model" "evdev"
[  2973.786] (**) Option "xkb_layout" "fr"
[  2973.788] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event4)
[  2973.788] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[  2973.788] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[  2973.788] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event4"
[  2973.796] (--) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[  2973.796] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[  2973.796] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[  2973.796] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[  2973.796] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[  2973.796] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[  2973.796] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2973.796] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[  2973.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[  2973.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[  2973.797] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[  2973.797] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[  2973.797] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[  2973.797] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[  2973.797] (II) No input driver/identifier specified (ignoring)
[  2973.801] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2973.801] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2973.801] (**) AT Translated Set 2 keyboard: always reports core events
[  2973.801] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  2973.810] (--) AT Translated Set 2 keyboard: Found keys
[  2973.810] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  2973.810] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  2973.810] (**) Option "xkb_rules" "evdev"
[  2973.810] (**) Option "xkb_model" "evdev"
[  2973.810] (**) Option "xkb_layout" "fr"
[  2973.810] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[  2973.810] (II) No input driver/identifier specified (ignoring)
[  4084.082] (II) Power Button: Close
[  4084.083] (II) UnloadModule: "evdev"
[  4084.086] (II) Power Button: Close
[  4084.086] (II) UnloadModule: "evdev"
[  4084.103] (II) Logitech USB-PS/2 Optical Mouse: Close
[  4084.103] (II) UnloadModule: "evdev"
[  4084.112] (II) AT Translated Set 2 keyboard: Close
[  4084.112] (II) UnloadModule: "evdev"

Re: [compiz] compiz me fait sauter ma session (surement fini

Publié : ven. 05 nov. 2010, 19:39
par peuks
Je ne sais plus comment mais mon problème a été corrigé ( je crois que j'ai effacé mes préferences et pour être sur ; réinstaller compiz )

Re: [compiz] compiz me fait sauter ma session (surement fini

Publié : ven. 05 nov. 2010, 22:40
par banditblue
peuks a écrit :Je ne sais plus comment mais mon problème a été corrigé ( je crois que j'ai effacé mes préferences et pour être sur ; réinstaller compiz )

euh oui et non
j'ai beau réinstaller le binz mais ca ne marche pas il me coupe toujours la session
je comprend pas même aprés une installation propre

Re: [compiz] compiz me fait sauter ma session (en cours )

Publié : sam. 06 nov. 2010, 08:41
par peuks
Es tu en testing ? Tu pourras essayer de "désactiver" cela .
-de bien vérifier que compiz est bien installé ( oui bon :D )
-vérifier que les drivers sont bien installés
-tester sur une nouvelle session
-tester avec gnome et fusion-icon ( sur la nouvelle aussi si ça fonctionne pas chez toi )

Et puis donne nous tes résultats du terminal :D