Abonnement !
J'ai cette carte aussi, je vais essayer les manips écrites plus haut dès que j'ai une connexion filaire (j'ai juste installé le driver rt2860 qui est sensé faire fonctionner la carte pour le moment...
++
Edit : je crois que je vais avoir besoin d'aide. J'avais déjà blacklisté des modules sous Fedora, mais sous Arch je m'y perd un peu. Dans rc.conf, j'ai vu qu'il suffisait de faire précéder d'un ! le module pour le blacklister comme expliqué à la fin. J'ai donc ajouté 'DAEMONS=!nomdumodule' après avoir désinstallé rt2860.
En redémarrant network-manager m'indique utiliser toujours rt2800pci
D'autre part il est fait mention d'un dossier /etc/network.d dans rc.conf qui est absent chez moi.
Autre question : faut-il créer un fichier blacklist.conf dans /etc/modprobe.d comme dans Fedora ?
Enfin je n'ai pas compris la raison de cette ligne : 'INTERFACES=(!eth0 !eth1 !wlan0)'
Toute aide pour éclaircir ces points sera bien appréciée ! Je n'arriverai peut-être pas à faire marcher le wifi, mais au moins je serai un peu moins bête.
Je copie quand même mon rc.conf tel qu'il est maintenant (j'ai supprimé les lignes pour blacklister comme elles n'avaient aucun effet).
Code : Tout sélectionner
#
# /etc/rc.conf - Main Configuration for Chakra Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="fr_frutf8"
HARDWARECLOCK="localtime"
TIMEZONE="Toronto"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
LOCALE="fr_frutf8"
HARDWARECLOCK="localtime"
TIMEZONE="Toronto"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!mii !r8169 !rt2800lib !rt2800pci !rt2x00lib !rt2x00pci !rt2x00usb !rt$
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="p3nguin-laptop"
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!mii !r8169 !rt2800lib !rt2800pci !rt2x00lib !rt2x00pci !rt2x00usb !rt$
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="p3nguin-laptop"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
eth0="dhcp"
# Wireless: See network profiles below
#
#Static IP example
eth0="dhcp"
eth0="dhcp"
INTERFACES=(!eth0 !eth1 !wlan0)
# Routes to start at boot-up (in this order)
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
eth0="dhcp"
# Wireless: See network profiles below
#
#Static IP example
eth0="dhcp"
eth0="dhcp"
INTERFACES=(!eth0 !eth1 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng dbus hal !network networkmanager avahi-daemon avahi-dnsconfd$
