Archlinux.fr [Forums]

Bonjour à tous, après un long mois sans mise à jour, je récupère mon netbook et effectue une upgrade complète. Tout fonctionne nickel, jusqu'au reboot ... Là, je me retrouve devant slim, mais ni la souris ni le clavier ne répondent :$
Je reboote sur ma vieille Ubuntu (j'ai un dual boot), passe en chroot pour enlever slim de mes services et modifier mon .xinitrc comme indiqué dans la doc, mais ca ne change rien, après un reboot, rien ne répond après mon startx ....
J'ai essayé de réinstaller Xorg, mon pilote intel, rien ne marche ... Et la config semi automatique ne parvient pas à générer de xorg.conf.new :$
J'aimerais vraiment éviter une réinstall, si quelqu'un a une idée, je suis preneur à fond !

Pour info, voici mon /var/log/Xorg.0.log :

Code : Tout sélectionner

[   290.733] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[   290.741] X Protocol Version 11, Revision 0
[   290.743] Build Operating System: Linux 2.6.38-ARCH i686 
[   290.746] Current Operating System: Linux Asus 2.6.38-ARCH #1 SMP PREEMPT Tue May 10 06:36:08 UTC 2011 i686
[   290.749] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda6 vga=792 console=tty1 quiet
[   290.751] Build Date: 16 April 2011  12:05:35PM
[   290.754]  
[   290.757] Current version of pixman: 0.20.2
[   290.760] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   290.766] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   290.775] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 12 13:02:17 2011
[   290.779] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   290.782] (==) No Layout section.  Using the first Screen section.
[   290.783] (==) No screen section available. Using defaults.
[   290.783] (**) |-->Screen "Default Screen Section" (0)
[   290.783] (**) |   |-->Monitor "<default monitor>"
[   290.783] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   290.783] (==) Automatically adding devices
[   290.783] (==) Automatically enabling devices
[   290.783] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   290.783] 	Entry deleted from font path.
[   290.783] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   290.783] (==) ModulePath set to "/usr/lib/xorg/modules"
[   290.784] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   290.784] (II) Loader magic: 0x81f4ee0
[   290.784] (II) Module ABI versions:
[   290.784] 	X.Org ANSI C Emulation: 0.4
[   290.784] 	X.Org Video Driver: 10.0
[   290.784] 	X.Org XInput driver : 12.2
[   290.784] 	X.Org Server Extension : 5.0
[   290.785] (--) PCI:*(0:0:2:0) 8086:a011:1043:83ac rev 0, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7d00000/1048576, I/O @ 0x0000dc00/8
[   290.786] (--) PCI: (0:0:2:1) 8086:a012:1043:83ac rev 0, Mem @ 0xf7e80000/524288
[   290.786] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   290.786] (II) LoadModule: "extmod"
[   290.787] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   290.787] (II) Module extmod: vendor="X.Org Foundation"
[   290.787] 	compiled for 1.10.1, module version = 1.0.0
[   290.788] 	Module class: X.Org Server Extension
[   290.788] 	ABI class: X.Org Server Extension, version 5.0
[   290.788] (II) Loading extension MIT-SCREEN-SAVER
[   290.788] (II) Loading extension XFree86-VidModeExtension
[   290.788] (II) Loading extension XFree86-DGA
[   290.788] (II) Loading extension DPMS
[   290.788] (II) Loading extension XVideo
[   290.788] (II) Loading extension XVideo-MotionCompensation
[   290.788] (II) Loading extension X-Resource
[   290.788] (II) LoadModule: "dbe"
[   290.789] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   290.789] (II) Module dbe: vendor="X.Org Foundation"
[   290.789] 	compiled for 1.10.1, module version = 1.0.0
[   290.789] 	Module class: X.Org Server Extension
[   290.789] 	ABI class: X.Org Server Extension, version 5.0
[   290.789] (II) Loading extension DOUBLE-BUFFER
[   290.789] (II) LoadModule: "glx"
[   290.790] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   290.791] (II) Module glx: vendor="X.Org Foundation"
[   290.791] 	compiled for 1.10.1, module version = 1.0.0
[   290.791] 	ABI class: X.Org Server Extension, version 5.0
[   290.791] (==) AIGLX enabled
[   290.791] (II) Loading extension GLX
[   290.791] (II) LoadModule: "record"
[   290.792] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   290.792] (II) Module record: vendor="X.Org Foundation"
[   290.792] 	compiled for 1.10.1, module version = 1.13.0
[   290.792] 	Module class: X.Org Server Extension
[   290.792] 	ABI class: X.Org Server Extension, version 5.0
[   290.792] (II) Loading extension RECORD
[   290.792] (II) LoadModule: "dri"
[   290.793] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   290.794] (II) Module dri: vendor="X.Org Foundation"
[   290.794] 	compiled for 1.10.1, module version = 1.0.0
[   290.794] 	ABI class: X.Org Server Extension, version 5.0
[   290.794] (II) Loading extension XFree86-DRI
[   290.794] (II) LoadModule: "dri2"
[   290.795] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   290.795] (II) Module dri2: vendor="X.Org Foundation"
[   290.795] 	compiled for 1.10.1, module version = 1.2.0
[   290.795] 	ABI class: X.Org Server Extension, version 5.0
[   290.795] (II) Loading extension DRI2
[   290.795] (==) Matched intel as autoconfigured driver 0
[   290.795] (==) Matched vesa as autoconfigured driver 1
[   290.795] (==) Matched fbdev as autoconfigured driver 2
[   290.795] (==) Assigned the driver to the xf86ConfigLayout
[   290.795] (II) LoadModule: "intel"
[   290.796] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   290.797] (II) Module intel: vendor="X.Org Foundation"
[   290.797] 	compiled for 1.10.0.902, module version = 2.15.0
[   290.797] 	Module class: X.Org Video Driver
[   290.797] 	ABI class: X.Org Video Driver, version 10.0
[   290.797] (II) LoadModule: "vesa"
[   290.797] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   290.798] (II) Module vesa: vendor="X.Org Foundation"
[   290.798] 	compiled for 1.10.0, module version = 2.3.0
[   290.798] 	Module class: X.Org Video Driver
[   290.798] 	ABI class: X.Org Video Driver, version 10.0
[   290.798] (II) LoadModule: "fbdev"
[   290.799] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   290.799] (II) Module fbdev: vendor="X.Org Foundation"
[   290.799] 	compiled for 1.10.0, module version = 0.4.2
[   290.799] 	ABI class: X.Org Video Driver, version 10.0
[   290.799] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
[   290.800] (II) VESA: driver for VESA chipsets: vesa
[   290.800] (II) FBDEV: driver for framebuffer: fbdev
[   290.800] (--) using VT number 7

[   290.811] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   290.812] (WW) Falling back to old probe method for vesa
[   290.812] (WW) Falling back to old probe method for fbdev
[   290.812] (II) Loading sub module "fbdevhw"
[   290.812] (II) LoadModule: "fbdevhw"
[   290.813] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   290.814] (II) Module fbdevhw: vendor="X.Org Foundation"
[   290.814] 	compiled for 1.10.1, module version = 0.0.2
[   290.814] 	ABI class: X.Org Video Driver, version 10.0
[   290.815] drmOpenDevice: node name is /dev/dri/card0
[   290.815] drmOpenDevice: open result is 8, (OK)
[   290.815] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   290.815] drmOpenDevice: node name is /dev/dri/card0
[   290.815] drmOpenDevice: open result is 8, (OK)
[   290.815] drmOpenByBusid: drmOpenMinor returns 8
[   290.815] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   290.815] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   290.815] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   290.815] (==) intel(0): RGB weight 888
[   290.815] (==) intel(0): Default visual is TrueColor
[   290.816] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[   290.816] (--) intel(0): Chipset: "Pineview GM"
[   290.816] (**) intel(0): Relaxed fencing enabled
[   290.816] (**) intel(0): Framebuffer tiled
[   290.816] (**) intel(0): Pixmaps tiled
[   290.816] (**) intel(0): 3D buffers tiled
[   290.816] (**) intel(0): SwapBuffers wait enabled
[   290.816] (==) intel(0): video overlay key set to 0x101fe
[   290.816] (II) intel(0): Output LVDS1 has no monitor section
[   290.817] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   290.843] (II) intel(0): Output VGA1 has no monitor section
[   290.843] (II) intel(0): EDID for output LVDS1
[   290.843] (II) intel(0): Manufacturer: HSD  Model: 3e9  Serial#: 60379
[   290.843] (II) intel(0): Year: 2010  Week: 3
[   290.843] (II) intel(0): EDID Version: 1.3
[   290.843] (II) intel(0): Digital Display Input
[   290.843] (II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[   290.843] (II) intel(0): Gamma: 2.20
[   290.844] (II) intel(0): No DPMS capabilities specified
[   290.844] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   290.844] (II) intel(0): First detailed timing is preferred mode
[   290.844] (II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.317 greenY: 0.564
[   290.844] (II) intel(0): blueX: 0.152 blueY: 0.131   whiteX: 0.310 whiteY: 0.330
[   290.844] (II) intel(0): Manufacturer's mask: 0
[   290.844] (II) intel(0): Supported detailed timing:
[   290.844] (II) intel(0): clock: 45.0 MHz   Image Size:  220 x 129 mm
[   290.844] (II) intel(0): h_active: 1024  h_sync: 1077  h_sync_end 1112 h_blank_end 1200 h_border: 0
[   290.844] (II) intel(0): v_active: 600  v_sync: 604  v_sync_end 609 v_blanking: 625 v_border: 0
[   290.844] (II) intel(0): Supported detailed timing:
[   290.844] (II) intel(0): clock: 51.4 MHz   Image Size:  220 x 129 mm
[   290.844] (II) intel(0): h_active: 1024  h_sync: 1117  h_sync_end 1152 h_blank_end 1240 h_border: 0
[   290.844] (II) intel(0): v_active: 600  v_sync: 617  v_sync_end 622 v_blanking: 638 v_border: 0
[   290.844] (II) intel(0):  
[   290.844] (II) intel(0):  
[   290.844] (II) intel(0): EDID (in hex):
[   290.844] (II) intel(0): 	00ffffffffffff002264e903dbeb0000
[   290.844] (II) intel(0): 	0314010380160d780a86269457519027
[   290.844] (II) intel(0): 	214f5400000001010101010101010101
[   290.844] (II) intel(0): 	010101010101941100b0405819203523
[   290.844] (II) intel(0): 	4500dc8100000019161400d840582620
[   290.844] (II) intel(0): 	5d231504dc8100000000000000fe0000
[   290.845] (II) intel(0): 	000000000000000000000000000000fe
[   290.845] (II) intel(0): 	0000000000000000000100000000000f
[   290.845] (II) intel(0): EDID vendor "HSD", prod id 1001
[   290.845] (II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only handle separate sync.
[   290.845] (II) intel(0): Printing DDC gathered Modelines:
[   290.845] (II) intel(0): Modeline "1024x600"x0.0   45.00  1024 1077 1112 1200  600 604 609 625 -hsync -vsync (37.5 kHz)
[   290.845] (II) intel(0): Modeline "1024x600"x0.0   51.42  1024 1117 1152 1240  600 617 622 638 -hsync -vsync (41.5 kHz)
[   290.845] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   290.845] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   290.845] (II) intel(0): Printing probed modes for output LVDS1
[   290.846] (II) intel(0): Modeline "1024x600"x60.0   45.00  1024 1077 1112 1200  600 604 609 625 -hsync -vsync (37.5 kHz)
[   290.846] (II) intel(0): Modeline "1024x600"x65.0   51.42  1024 1117 1152 1240  600 601 606 638 -hsync -vsync (41.5 kHz)
[   290.846] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   290.846] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   290.846] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   290.876] (II) intel(0): EDID for output VGA1
[   290.876] (II) intel(0): Output LVDS1 connected
[   290.876] (II) intel(0): Output VGA1 disconnected
[   290.876] (II) intel(0): Using exact sizes for initial modes
[   290.876] (II) intel(0): Output LVDS1 using initial mode 1024x600
[   290.877] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   290.877] (II) intel(0): Kernel page flipping support detected, enabling
[   290.877] (**) intel(0): Display dimensions: (220, 130) mm
[   290.877] (**) intel(0): DPI set to (118, 117)
[   290.877] (II) Loading sub module "fb"
[   290.877] (II) LoadModule: "fb"
[   290.878] (II) Loading /usr/lib/xorg/modules/libfb.so
[   290.878] (II) Module fb: vendor="X.Org Foundation"
[   290.878] 	compiled for 1.10.1, module version = 1.0.0
[   290.879] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   290.879] (II) Loading sub module "dri2"
[   290.879] (II) LoadModule: "dri2"
[   290.880] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   290.880] (II) Module dri2: vendor="X.Org Foundation"
[   290.880] 	compiled for 1.10.1, module version = 1.2.0
[   290.880] 	ABI class: X.Org Server Extension, version 5.0
[   290.880] (II) UnloadModule: "vesa"
[   290.880] (II) Unloading vesa
[   290.880] (II) UnloadModule: "fbdev"
[   290.880] (II) Unloading fbdev
[   290.880] (II) UnloadModule: "fbdevhw"
[   290.880] (II) Unloading fbdevhw
[   290.880] (==) Depth 24 pixmap format is 32 bpp
[   290.880] (II) intel(0): [DRI2] Setup complete
[   290.880] (II) intel(0): [DRI2]   DRI driver: i915
[   290.880] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[   290.881] (II) UXA(0): Driver registered support for the following operations:
[   290.881] (II)         solid
[   290.881] (II)         copy
[   290.881] (II)         composite (RENDER acceleration)
[   290.881] (II)         put_image
[   290.881] (II)         get_image
[   290.881] (==) intel(0): Backing store disabled
[   290.881] (==) intel(0): Silken mouse enabled
[   290.881] (II) intel(0): Initializing HW Cursor
[   290.896] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   290.906] (==) intel(0): DPMS enabled
[   290.906] (==) intel(0): Intel XvMC decoder disabled
[   290.906] (II) intel(0): Set up textured video
[   290.906] (II) intel(0): Set up overlay video
[   290.906] (II) intel(0): direct rendering: DRI2 Enabled
[   290.906] (==) intel(0): hotplug detection: "enabled"
[   290.907] (--) RandR disabled
[   290.907] (II) Initializing built-in extension Generic Event Extension
[   290.907] (II) Initializing built-in extension SHAPE
[   290.907] (II) Initializing built-in extension MIT-SHM
[   290.907] (II) Initializing built-in extension XInputExtension
[   290.907] (II) Initializing built-in extension XTEST
[   290.907] (II) Initializing built-in extension BIG-REQUESTS
[   290.907] (II) Initializing built-in extension SYNC
[   290.907] (II) Initializing built-in extension XKEYBOARD
[   290.907] (II) Initializing built-in extension XC-MISC
[   290.907] (II) Initializing built-in extension SECURITY
[   290.907] (II) Initializing built-in extension XINERAMA
[   290.907] (II) Initializing built-in extension XFIXES
[   290.907] (II) Initializing built-in extension RENDER
[   290.907] (II) Initializing built-in extension RANDR
[   290.907] (II) Initializing built-in extension COMPOSITE
[   290.907] (II) Initializing built-in extension DAMAGE
[   290.940] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   290.940] (II) AIGLX: enabled GLX_INTEL_swap_event
[   290.940] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   290.940] (II) AIGLX: enabled GLX_SGI_make_current_read
[   290.940] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   290.940] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[   290.940] (II) GLX: Initialized DRI2 GL provider for screen 0
[   290.942] (II) intel(0): Setting screen physical size to 270 x 158

Salut.

TheWatcher92 a écrit :J'aimerais vraiment éviter une réinstall, si quelqu'un a une idée, je suis preneur à fond !

Déjà ne pas réinstaller (pour quoi faire de toutes manières ? ... pour remettre à niveau et retomber sur le même problème ?).

TheWatcher92 a écrit :J'ai essayé de réinstaller Xorg, mon pilote intel, rien ne marche ... Et la config semi automatique ne parvient pas à générer de xorg.conf.new :$

De toutes manières, le xorg.conf est déprécié (il est préférable de mettre les configurations dans /etc/X11/xorg.conf.d/ ).
Ton dernier log de X (/var/log/Xorg.0.log ou alors le fichier "startx.log" que tu récupères en faisant "startx &> startx.log") nous sera précieux.

EDIT: grillé pour la demande de log...

c'est très bien.

Ba je pensais faire une réinstall sans mettre à jour le xorg et tout ce qui est plus ou moins sensible, mais seulement les utilitaires (navigateur, client mail, traitement de texte, ...)
Je suis un peu perdu avec ce Xorg.0.log, je ne vois pas vraiment d'où peut venir le problème..
Ah, au cas où, même si c'est pas une super méthode, voici le message d'erreur que j'obtiens après X -configure (il y a p-e une info intéressante dedans, je sais pas) :

Code : Tout sélectionner

Xorg: symbol lookup error: /usr/lib/xorg/modules/drivers/xgixp_drv.so: undefined symbol: LoaderReqSymLists

Ton log est propre... En dehors du fait qu'il n'y a effectivement rien de relatif à la souris ou au clavier

(au passage, tu peux supprimer dans ton menu.lst l'option "vga", ça ne fait pas bon ménage avec les pilotes intel à cause de KMS)

Pourtant, je présume que tu as bien un /etc/X11/xorg.conf.d/10-evdev.conf (vient avec xorg-server), avec éventuellement synaptics, et que ton matériel est bien vu (lspci/lsusb) ?
Tu peux éventuellement voir de ce côté aussi: https://wiki.archlinux.org/index.php/Xo ... d_settings (mais ça m'étonnerait, vu que ta souris n'est pas détectée non plus)

Solution de contournement, en attendant mieux, tu pourrais réinstaller la version précédente de xorg (1.9) à partir d'ARM.

EDIT: xgixp_drv.so... à moins que tu en aies besoin (je ne sais pas à quoi il sert), je te suggère de le désinstaller... mais c'est un pilote video, donc pour ton problème, aucune importance à priori (les méthodes qui aboutissent à générer un xorg.conf ne sont de toutes manières plus très utiles avec xorg>=1.8 ).

Oui, j'ai bien un /etc/X11/xorg.conf.d/10-evdev.conf, le voici :

Code : Tout sélectionner

#
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
	Option "XkbLayout"	"fr"

EndSection

Section "InputClass"
        Identifier "evdev touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Et voici les retours de lspci et lsusb :
lspci:

Code : Tout sélectionner

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

lsusb:

Code : Tout sélectionner

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 13d3:5111 IMC Networks Integrated Webcam

Sinon, je ne sais pas comment faire pour réinstaller l'ancienne version de xorg ? Avec pacman et une option spéciale ?
Merci de m'aider en tout cas, je suis un peu perdu ^^'

Il est impératif avec le driver intel de ne pas avoir l'option vga dans la ligne kernel !!!
Tu peux aussi configurer KMS pour qu'il se charge au plus tôt

Je viens de supprimer l'option vga dans la ligne de kernel de grub, et après reboot, le problème est toujours là

C'est normal... mais c'est de toutes façons mieux.

(au passage, tu peux avoir KMS plus tôt, l'affichage est meilleur: http://wiki.archlinux.fr/Intel ).

Pour rétrograder: http://wiki.archlinux.fr/Downgrade#Arch ... ck_Machine (ou tu récupères les paquets qui t'intéressent depuis ARM et tu installes avec -U )

Tu pourrais aussi nous installer hwinfo (j'aime pô lspci et cie

) et nous communiquer:

Code : Tout sélectionner

hwinfo --keyboard
hwinfo --mouse

Alors, j'ai bien rétrogradé xorg, mais le problème persiste :/
Voici les sorties de hwinfo:
--keyboard :

Code : Tout sélectionner

18: PS/2 00.0: 10800 Keyboard
  [Created at input.161]
  Unique ID: c3zD.+49ps10DtUF
  Hardware Class: keyboard
  Model: "AT Translated Set 2 keyboard"
  Vendor: 0x0001 
  Device: 0x0001 "AT Translated Set 2 keyboard"
  Compatible to: int 0x0211 0x0001
  Device File: /dev/input/event4
  Device Number: char 13:68
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=new, avail=yes, need=no, active=unknown

--mouse :

Code : Tout sélectionner

35: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.183]
  Unique ID: AH6Q.ZHI3OT7LsxA
  Hardware Class: mouse
  Model: "SynPS/2 Synaptics TouchPad"
  Vendor: 0x0002 
  Device: 0x0007 "SynPS/2 Synaptics TouchPad"
  Compatible to: int 0x0210 0x0002
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event8
  Device Number: char 13:63 (char 13:32)
  Driver Info #0:
    Buttons: 2
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

Bizarre... à croire que X fait la grève d'udev (qui doit pourtant être lancé sinon comment il récupère la carte intel ? )... ou la détection est inexplicablement désactivée:

Code : Tout sélectionner

grep -i AutoAddDevices /etc/X11/xorg.conf.d/*

?

Tu as quoi comme fichiers de configuration de X:

Code : Tout sélectionner

ls -al /etc/X11/xorg.conf.d/

?

Code : Tout sélectionner

grep -i keyboard /var/log/everything.log

?

Je ne pige pas... essaie de rétrograder le kernel pour voir.

Archlinux.fr [Forums]

[Xorg] Xorg figé après mise à jour (en attente)

[Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)

Re: [Xorg] Xorg figé après mise à jour (en attente)