Page 1 sur 1

[Conky]no fan, no temp pour conky.

Publié : lun. 24 oct. 2011, 11:53
par otto
Bonjour,
J'ai cherché un moment, lancé sensors detect, installé acpi...
J'ai pas osé poster tout de suite mais la, rien n'y fait :

Code : Tout sélectionner

[otto@tuxrider ~]$ conky
Conky: scandir for /proc/acpi/thermal_zone/: No such file or directory
Conky: unknown variable 
Conky: desktop window (a00096) is subwindow of root window (1ad)
Conky: window type - desktop
Conky: drawing to created window (0x1600001)
Conky: drawing to double buffer
Conky: scandir for /proc/acpi/fan/: No such file or directory
Ce qui donne : Temp : 0 no fans?${}

Mon .conkyrc de débutant et mal dégrossis :

Code : Tout sélectionner

double_buffer yes

alignment top_right

TEXT
$sysname $kernel
$nodename

$utime
Actif depuis : $uptime

temp : $acpitemp $acpifan$


$cpubar 1 20,120
$cpubar 2 10,120
Root
${fs_bar 10,150 /root}

Otto
${fs_bar 10,150 /home}


Downloading at : ${downspeedf wlan0}
${downspeedgraph wlan0 22,150 00ff00 ff0000}
Uploading at   :${upspeedf wlan0}
${upspeedgraph wlan0 22,150 00ff00 ff0000}




Je suis sur un Dell latitude 820.
En cherchant sur le web je n'ai rien trouver qui me renseigne vraiment sur ce probleme...
Venant tout juste de me lancer dans Archlinux et ayant tout juste installé Conky je suis un peu perdu.

Des idées? Plus de renseignement?
A votre service.

Edit :
Trouver un semblant d'info ici
Mais si le probleme semble venir du "setting"...
Well, I finally got the Temperature gadget working with kernel 2.6.39-2.

The solution eventually appeared in the discussion on this thread on the E mailing-list.

The Temperature gadget has two "Hardware" settings - "Internal" and "UDEV". The default is "Internal", but setting it to "UDEV" gets the gadget working again.

It's similar to the fact that Conky's "acpitemp" object doesn't work anymore, but its "hwmon" object does work for temperature.

So, I guess I will call this one SOLVED.

I wonder what will happen to the E ticket?
Que faire de cette information??

Précision : les lignes piochées ici ou là concernant hwmon ne marche pas non plus.


EDIT : Au hasard de mes diverses tentatives j'ai trouvé ce topic ou j'ai piocher le bout de code suivant qui semble fonctionner...

Code : Tout sélectionner

CPU : ${color1}${hwmon 1 temp 2}C°
A verifier !

Re edit...
Bon ça ne marche pas à chaque foi... En effet le fichier change de temps à autre. Un coup c'est temp 1 l'autre c'est temp 2.

Re: [Conky]no fan, no temp pour conky.

Publié : mar. 13 déc. 2011, 13:00
par rsuinux
Je n'apporte pas de réponse, hélas, mais un support moral: nous sommes deux!
acpi_call d'installé
acpi d'installé
xfce4 installé et le plugin sensors plante lamentablement
sensors-detect n'apporte pas de solution
Je suis sur un asus X53S

Je cherche aussi. Mais est faisable. Ma première installation a été une debian testing et cela fonctionnait!
Donc -> problème de configuration probable.

le premier qui trouve....

Re: [Conky]no fan, no temp pour conky.

Publié : mar. 13 déc. 2011, 20:39
par benjarobin
Que donne la sortie de : acpi -V

Re: [Conky]no fan, no temp pour conky.

Publié : mar. 13 déc. 2011, 21:47
par rsuinux
chez moi:

Code : Tout sélectionner

acpi -v
acpi 1.5

Copyright (C) 2001 Grahame Bowland.
              2008 Michael Meskes.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Re: [Conky]no fan, no temp pour conky.

Publié : mar. 13 déc. 2011, 21:56
par benjarobin
...
-V et pas -v

Re: [Conky]no fan, no temp pour conky.

Publié : mer. 14 déc. 2011, 13:59
par rsuinux
oups, :? je dois changer de lunette, peut être.. ou de cerveau...?

Code : Tout sélectionner

$ acpi -V
Battery 0: Charging, 55%, 00:51:47 until charged
Battery 0: design capacity 5200 mAh, last full capacity 4891 mAh = 94%
Adapter 0: on-line
Thermal 0: ok, 47.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 103.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 105.0 degrees C
Cooling 0: LCD 0 of 10
Cooling 1: LCD 0 of 10
Cooling 2: Processor 0 of 7
Cooling 3: Processor 0 of 7
Cooling 4: Processor 0 of 7
Cooling 5: Processor 0 of 7
Est-ce que c'est dans /etc/acpi/ que je devrai configurer la limite de température pour les ventilateurs? Je suppose que je devrais faire une config du genre: " si ° <50 alors pas de ventilateur, mais si > 100 alors ventilateur à fond la caisse "

Rémi.

Re: [Conky]no fan, no temp pour conky.

Publié : mer. 14 déc. 2011, 14:43
par drs
ton "probleme" est du a ca: http://projects.archlinux.org/svntogit/ ... 9138b67534
les infos sont desormais accessibles dans /sys/class/hwmon/