[touchpad] Problème de glisser/déposer [résolu]

[Jejel59]

Bonjour,
Je me suis proposé d'installer le merveilleux monde de Linux sur l'odinateur portable d'un amis, mais je rencontre actuellement deux problèmes assez embêtants.. J'ai cherché sur Internet concernant ces problèmes, mais c'est généralement dépassé.
Je les ai séparé en 2 sujets en espérant qu'ils pourront être résolé plus rapidement.. (l'autre sujet: http://forums.archlinux.fr/topic12691.html)

L'odinateur est un Dell Mini 10, et j'ai choisi d'installer Cinnamon et LXDM. Tous les paquets sont à jour, depuis les repos stables (linux, systemd, xorg-server, pulseaudio, alsa, ..).

La particularité de ce netbook c'est que les boutons (droite et gauche) qui sont de "vrais" butons, sont dans la même "zone" que le touchpad. (http://www.notebookcheck.biz/uploads/pi ... pad_10.jpg)
Le problème c'est que je ne peux pas faire un clique droit (ou gauche) et bouger la souris avec le touchpad. Cependant je peux glisser/déposer avec le touchpad.
J'ai d'abord eu ce problème sans ajout ni changement dans les fichiers de configuration. Le clique fonctionne, mais je ne peux pas bouger la souris avec un autre doigt, seulement le doigt qui appuie sur le bouton droit peut bouger la souris.
Après avoir cherché un peu, j'ai essayer d'ajouter des options dans la configuration du touchpad (synaptics). Le problème est le même.
Voici le fichier de config 10-synaptics.conf (j'ai essayé les options commentées, mais ça n'a rien résolu):

Section "InputClass"
Identifier "touchpad"
Driver "synaptics"
MatchIsTouchpad "on"
Option "SHMConfig" "true"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# Option "JumpyCursorThreshold" "90"
Option "AreaBottomEdge" "4100"
# Option "AreaLeftEdge" "1500"
EndSection

J'ai trouvé ce rapport de bug qui correspond à mon problème, mais il est dit que le problème a été fixé. https://bugs.launchpad.net/ubuntu/+sour ... bug/736523
Donc je ne sais pas si j'ai oublié quelque chose dans la configuration.

Merci beaucoup pour votre aide!

[FoolEcho]

Salut,

Je pense que tu devrais voir (et nous montrer, bien sûr ) avec xinput/synclient ce qu'il est possible de faire avec ton touchpad et comment tout ça réagi: http://wiki.archlinux.fr/Touchpad_Synap ... figuration.

Peut-être avoir aussi /var/log/Xorg.0.log pour qu'on voit comment tout est actuellement perçu par X...

[Jejel59]

Merci pour ta réponse! Je savais pas trop justement quel(s) info(s) regarder et donner en plus..

Voici la sortie de xinput list-props "SynPS/2 Synaptics TouchPad"

Device 'SynPS/2 Synaptics TouchPad':
Device Enabled (134): 1
Coordinate Transformation Matrix (136): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (257): 1
Device Accel Constant Deceleration (258): 2.500000
Device Accel Adaptive Deceleration (259): 1.000000
Device Accel Velocity Scaling (260): 12.500000
Synaptics Edges (261): 1760, 5302, 1639, 4479
Synaptics Finger (262): 25, 30, 256
Synaptics Tap Time (263): 180
Synaptics Tap Move (264): 232
Synaptics Tap Durations (265): 180, 180, 100
Synaptics ClickPad (266): 0
Synaptics Tap FastTap (267): 0
Synaptics Middle Button Timeout (268): 75
Synaptics Two-Finger Pressure (269): 282
Synaptics Two-Finger Width (270): 7
Synaptics Scrolling Distance (271): 105, 105
Synaptics Edge Scrolling (272): 0, 0, 0
Synaptics Two-Finger Scrolling (273): 1, 0
Synaptics Move Speed (274): 1.000000, 1.750000, 0.037893, 40.000000
Synaptics Edge Motion Pressure (275): 30, 160
Synaptics Edge Motion Speed (276): 1, 422
Synaptics Edge Motion Always (277): 0
Synaptics Off (278): 0
Synaptics Locked Drags (279): 0
Synaptics Locked Drags Timeout (280): 5000
Synaptics Tap Action (281): 0, 0, 0, 0, 1, 3, 2
Synaptics Click Action (282): 1, 1, 1
Synaptics Circular Scrolling (283): 0
Synaptics Circular Scrolling Distance (284): 0.100000
Synaptics Circular Scrolling Trigger (285): 0
Synaptics Circular Pad (286): 0
Synaptics Palm Detection (287): 0
Synaptics Palm Dimensions (288): 10, 200
Synaptics Coasting Speed (289): 20.000000, 50.000000
Synaptics Pressure Motion (290): 30, 160
Synaptics Pressure Motion Factor (291): 1.000000, 1.000000
Synaptics Grab Event Device (292): 1
Synaptics Gestures (293): 1
Synaptics Capabilities (294): 1, 0, 1, 1, 1, 1, 1
Synaptics Pad Resolution (295): 121, 58
Synaptics Area (296): 0, 0, 0, 0
Synaptics Noise Cancellation (297): 26, 26
Device Product ID (252): 2, 7
Device Node (253): "/dev/input/event10"

La sortie de synclient

Parameter settings:
LeftEdge = 1760
RightEdge = 5302
TopEdge = 1639
BottomEdge = 4479
FingerLow = 25
FingerHigh = 30
FingerPress = 256
MaxTapTime = 180
MaxTapMove = 232
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
FastTaps = 0
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 105
HorizScrollDelta = 105
VertEdgeScroll = 0
HorizEdgeScroll = 0
CornerCoasting = 0
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 0
MinSpeed = 1
MaxSpeed = 1.75
AccelFactor = 0.0378931
TrackstickSpeed = 40
EdgeMotionMinZ = 30
EdgeMotionMaxZ = 160
EdgeMotionMinSpeed = 1
EdgeMotionMaxSpeed = 422
EdgeMotionUseAlways = 0
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 3
TapButton3 = 2
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 1
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 4100
HorizHysteresis = 26
VertHysteresis = 26
ClickPad = 0

Et le log du serveur X (/var/log/Xorg.0.log)

[ 47138.522]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 47138.522] X Protocol Version 11, Revision 0
[ 47138.522] Build Operating System: Linux 3.7.0-1-ARCH i686
[ 47138.522] Current Operating System: Linux rachel-laptop 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012 i686
[ 47138.522] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4f47a869-db24-418e-a056-e36d8669c7bd ro
[ 47138.522] Build Date: 16 December 2012 04:52:09PM
[ 47138.522]
[ 47138.522] Current version of pixman: 0.28.2
[ 47138.523] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 47138.523] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 47138.523] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 14 11:53:45 2013
[ 47138.523] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 47138.524] (==) No Layout section. Using the first Screen section.
[ 47138.524] (==) No screen section available. Using defaults.
[ 47138.524] (**) |-->Screen "Default Screen Section" (0)
[ 47138.524] (**) | |-->Monitor "<default monitor>"
[ 47138.524] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 47138.524] (==) Automatically adding devices
[ 47138.524] (==) Automatically enabling devices
[ 47138.525] (==) Automatically adding GPU devices
[ 47138.525] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 47138.525] Entry deleted from font path.
[ 47138.525] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 47138.525] Entry deleted from font path.
[ 47138.525] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 47138.525] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 47138.525] Entry deleted from font path.
[ 47138.525] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 47138.525] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 47138.525] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 47138.525] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 47138.525] (II) Loader magic: 0x825a640
[ 47138.525] (II) Module ABI versions:
[ 47138.525] X.Org ANSI C Emulation: 0.4
[ 47138.525] X.Org Video Driver: 13.1
[ 47138.525] X.Org XInput driver : 18.0
[ 47138.525] X.Org Server Extension : 7.0
[ 47138.526] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 47138.530] (--) PCI:*(0:0:2:0) 8086:27ae:1028:02f4 rev 3, Mem @ 0xf0000000/524288, 0xd0000000/268435456, 0xf0200000/262144, I/O @ 0x00001800/8
[ 47138.530] (--) PCI: (0:0:2:1) 8086:27a6:1028:02f4 rev 3, Mem @ 0xf0080000/524288
[ 47138.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 47138.531] Initializing built-in extension Generic Event Extension
[ 47138.531] Initializing built-in extension SHAPE
[ 47138.531] Initializing built-in extension MIT-SHM
[ 47138.531] Initializing built-in extension XInputExtension
[ 47138.531] Initializing built-in extension XTEST
[ 47138.531] Initializing built-in extension BIG-REQUESTS
[ 47138.531] Initializing built-in extension SYNC
[ 47138.531] Initializing built-in extension XKEYBOARD
[ 47138.531] Initializing built-in extension XC-MISC
[ 47138.531] Initializing built-in extension SECURITY
[ 47138.531] Initializing built-in extension XINERAMA
[ 47138.531] Initializing built-in extension XFIXES
[ 47138.531] Initializing built-in extension RENDER
[ 47138.531] Initializing built-in extension RANDR
[ 47138.531] Initializing built-in extension COMPOSITE
[ 47138.531] Initializing built-in extension DAMAGE
[ 47138.531] Initializing built-in extension MIT-SCREEN-SAVER
[ 47138.531] Initializing built-in extension DOUBLE-BUFFER
[ 47138.531] Initializing built-in extension RECORD
[ 47138.531] Initializing built-in extension DPMS
[ 47138.532] Initializing built-in extension X-Resource
[ 47138.532] Initializing built-in extension XVideo
[ 47138.532] Initializing built-in extension XVideo-MotionCompensation
[ 47138.532] Initializing built-in extension XFree86-VidModeExtension
[ 47138.532] Initializing built-in extension XFree86-DGA
[ 47138.532] Initializing built-in extension XFree86-DRI
[ 47138.532] Initializing built-in extension DRI2
[ 47138.532] (II) LoadModule: "glx"
[ 47138.533] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 47138.533] (II) Module glx: vendor="X.Org Foundation"
[ 47138.533] compiled for 1.13.1, module version = 1.0.0
[ 47138.533] ABI class: X.Org Server Extension, version 7.0
[ 47138.533] (==) AIGLX enabled
[ 47138.533] Loading extension GLX
[ 47138.534] (==) Matched intel as autoconfigured driver 0
[ 47138.534] (==) Matched intel as autoconfigured driver 1
[ 47138.534] (==) Matched vesa as autoconfigured driver 2
[ 47138.534] (==) Matched modesetting as autoconfigured driver 3
[ 47138.534] (==) Matched fbdev as autoconfigured driver 4
[ 47138.534] (==) Assigned the driver to the xf86ConfigLayout
[ 47138.534] (II) LoadModule: "intel"
[ 47138.534] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 47138.535] (II) Module intel: vendor="X.Org Foundation"
[ 47138.535] compiled for 1.13.1, module version = 2.20.17
[ 47138.535] Module class: X.Org Video Driver
[ 47138.535] ABI class: X.Org Video Driver, version 13.1
[ 47138.535] (II) LoadModule: "vesa"
[ 47138.536] (WW) Warning, couldn't open module vesa
[ 47138.536] (II) UnloadModule: "vesa"
[ 47138.536] (II) Unloading vesa
[ 47138.536] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 47138.536] (II) LoadModule: "modesetting"
[ 47138.537] (WW) Warning, couldn't open module modesetting
[ 47138.537] (II) UnloadModule: "modesetting"
[ 47138.537] (II) Unloading modesetting
[ 47138.537] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 47138.537] (II) LoadModule: "fbdev"
[ 47138.538] (WW) Warning, couldn't open module fbdev
[ 47138.538] (II) UnloadModule: "fbdev"
[ 47138.538] (II) Unloading fbdev
[ 47138.538] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 47138.538] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 47138.541] (++) using VT number 7

[ 47138.552] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 47138.552] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 47138.552] (==) intel(0): RGB weight 888
[ 47138.552] (==) intel(0): Default visual is TrueColor
[ 47138.553] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 47138.553] (**) intel(0): Relaxed fencing disabled
[ 47138.553] (**) intel(0): Wait on SwapBuffers? enabled
[ 47138.553] (**) intel(0): Triple buffering? enabled
[ 47138.553] (**) intel(0): Framebuffer tiled
[ 47138.553] (**) intel(0): Pixmaps tiled
[ 47138.553] (**) intel(0): 3D buffers tiled
[ 47138.553] (**) intel(0): SwapBuffers wait enabled
[ 47138.553] (==) intel(0): video overlay key set to 0x101fe
[ 47138.554] (II) intel(0): Output LVDS1 has no monitor section
[ 47138.555] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 47138.595] (II) intel(0): Output VGA1 has no monitor section
[ 47138.596] (II) intel(0): EDID for output LVDS1
[ 47138.596] (II) intel(0): Manufacturer: BOE Model: 587 Serial#: 0
[ 47138.596] (II) intel(0): Year: 2009 Week: 1
[ 47138.596] (II) intel(0): EDID Version: 1.3
[ 47138.596] (II) intel(0): Digital Display Input
[ 47138.596] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 47138.596] (II) intel(0): Gamma: 2.20
[ 47138.596] (II) intel(0): No DPMS capabilities specified
[ 47138.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 47138.596] (II) intel(0): First detailed timing is preferred mode
[ 47138.597] (II) intel(0): redX: 0.582 redY: 0.338 greenX: 0.305 greenY: 0.557
[ 47138.597] (II) intel(0): blueX: 0.151 blueY: 0.141 whiteX: 0.312 whiteY: 0.328
[ 47138.597] (II) intel(0): Manufacturer's mask: 0
[ 47138.597] (II) intel(0): Supported detailed timing:
[ 47138.597] (II) intel(0): clock: 57.7 MHz Image Size: 223 x 125 mm
[ 47138.597] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1498 h_border: 0
[ 47138.597] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 613 v_blanking: 642 v_border: 0
[ 47138.597] (II) intel(0): Supported detailed timing:
[ 47138.597] (II) intel(0): clock: 57.7 MHz Image Size: 223 x 125 mm
[ 47138.597] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1498 h_border: 0
[ 47138.597] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 613 v_blanking: 642 v_border: 0
[ 47138.598] (II) intel(0): H018T\80HT10101
[ 47138.598] (II) intel(0): Unknown vendor-specific block 0
[ 47138.598] (II) intel(0): EDID (in hex):
[ 47138.598] (II) intel(0): 00ffffffffffff0009e5870500000000
[ 47138.598] (II) intel(0): 0113010390160d780a22c095564e8e26
[ 47138.598] (II) intel(0): 24505400000001010101010101010101
[ 47138.598] (II) intel(0): 0101010101018a1600da41582a203020
[ 47138.598] (II) intel(0): 3a00df7d0000001a8a1600da41582a20
[ 47138.598] (II) intel(0): 30203a00df7d0000001a000000fe0048
[ 47138.598] (II) intel(0): 30313854804854313031303100000000
[ 47138.599] (II) intel(0): 00000000000000000001010a20200050
[ 47138.599] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 47138.599] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 47138.599] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 47138.599] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 47138.599] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 47138.600] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 47138.600] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 47138.600] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 47138.600] (II) intel(0): Printing probed modes for output LVDS1
[ 47138.600] (II) intel(0): Modeline "1024x600"x60.0 57.70 1024 1072 1104 1498 600 603 613 642 +hsync -vsync (38.5 kHz eP)
[ 47138.600] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 47138.600] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 47138.600] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 47138.639] (II) intel(0): EDID for output VGA1
[ 47138.639] (II) intel(0): Output LVDS1 connected
[ 47138.639] (II) intel(0): Output VGA1 disconnected
[ 47138.639] (II) intel(0): Using exact sizes for initial modes
[ 47138.639] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 47138.639] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 47138.639] (II) intel(0): Kernel page flipping support detected, enabling
[ 47138.639] (==) intel(0): DPI set to (96, 96)
[ 47138.639] (II) Loading sub module "fb"
[ 47138.639] (II) LoadModule: "fb"
[ 47138.640] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 47138.641] (II) Module fb: vendor="X.Org Foundation"
[ 47138.642] compiled for 1.13.1, module version = 1.0.0
[ 47138.642] ABI class: X.Org ANSI C Emulation, version 0.4
[ 47138.642] (II) Loading sub module "dri2"
[ 47138.642] (II) LoadModule: "dri2"
[ 47138.642] (II) Module "dri2" already built-in
[ 47138.642] (==) Depth 24 pixmap format is 32 bpp
[ 47138.642] (II) intel(0): [DRI2] Setup complete
[ 47138.643] (II) intel(0): [DRI2] DRI driver: i915
[ 47138.643] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 47138.643] (II) UXA(0): Driver registered support for the following operations:
[ 47138.643] (II) solid
[ 47138.643] (II) copy
[ 47138.643] (II) composite (RENDER acceleration)
[ 47138.643] (II) put_image
[ 47138.643] (II) get_image
[ 47138.643] (==) intel(0): Backing store disabled
[ 47138.644] (==) intel(0): Silken mouse enabled
[ 47138.644] (II) intel(0): Initializing HW Cursor
[ 47138.644] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 47138.647] (==) intel(0): DPMS enabled
[ 47138.647] (==) intel(0): Intel XvMC decoder disabled
[ 47138.647] (II) intel(0): Set up textured video
[ 47138.647] (II) intel(0): Set up overlay video
[ 47138.648] (II) intel(0): direct rendering: DRI2 Enabled
[ 47138.648] (==) intel(0): hotplug detection: "enabled"
[ 47138.668] (--) RandR disabled
[ 47138.708] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 47138.708] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 47138.708] (II) AIGLX: enabled GLX_ARB_create_context
[ 47138.708] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 47138.708] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 47138.708] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 47138.708] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 47138.708] (II) AIGLX: Loaded and initialized i915
[ 47138.709] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 47138.710] (II) intel(0): Setting screen physical size to 270 x 158
[ 47138.834] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 47138.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47138.834] (II) LoadModule: "evdev"
[ 47138.835] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 47138.835] (II) Module evdev: vendor="X.Org Foundation"
[ 47138.835] compiled for 1.13.0, module version = 2.7.3
[ 47138.835] Module class: X.Org XInput Driver
[ 47138.835] ABI class: X.Org XInput driver, version 18.0
[ 47138.835] (II) Using input driver 'evdev' for 'Power Button'
[ 47138.835] (**) Power Button: always reports core events
[ 47138.835] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 47138.836] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47138.836] (--) evdev: Power Button: Found keys
[ 47138.836] (II) evdev: Power Button: Configuring as keyboard
[ 47138.836] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 47138.836] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 47138.836] (**) Option "xkb_rules" "evdev"
[ 47138.836] (**) Option "xkb_model" "evdev"
[ 47138.836] (**) Option "xkb_layout" "us"
[ 47138.917] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 47138.917] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 47138.917] (II) Using input driver 'evdev' for 'Video Bus'
[ 47138.917] (**) Video Bus: always reports core events
[ 47138.917] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 47138.917] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 47138.917] (--) evdev: Video Bus: Found keys
[ 47138.917] (II) evdev: Video Bus: Configuring as keyboard
[ 47138.917] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 47138.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 47138.918] (**) Option "xkb_rules" "evdev"
[ 47138.918] (**) Option "xkb_model" "evdev"
[ 47138.918] (**) Option "xkb_layout" "us"
[ 47138.919] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 47138.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47138.919] (II) Using input driver 'evdev' for 'Power Button'
[ 47138.920] (**) Power Button: always reports core events
[ 47138.920] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 47138.920] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47138.920] (--) evdev: Power Button: Found keys
[ 47138.920] (II) evdev: Power Button: Configuring as keyboard
[ 47138.920] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 47138.920] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[ 47138.920] (**) Option "xkb_rules" "evdev"
[ 47138.920] (**) Option "xkb_model" "evdev"
[ 47138.920] (**) Option "xkb_layout" "us"
[ 47138.922] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 47138.922] (II) No input driver specified, ignoring this device.
[ 47138.922] (II) This device may have been added with another device file.
[ 47138.922] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 47138.924] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 47138.924] (II) No input driver specified, ignoring this device.
[ 47138.924] (II) This device may have been added with another device file.
[ 47138.925] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 47138.925] (II) No input driver specified, ignoring this device.
[ 47138.925] (II) This device may have been added with another device file.
[ 47138.926] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 47138.926] (II) No input driver specified, ignoring this device.
[ 47138.926] (II) This device may have been added with another device file.
[ 47138.927] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event6)
[ 47138.927] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[ 47138.927] (II) Using input driver 'evdev' for 'Integrated Webcam'
[ 47138.927] (**) Integrated Webcam: always reports core events
[ 47138.927] (**) evdev: Integrated Webcam: Device: "/dev/input/event6"
[ 47138.928] (--) evdev: Integrated Webcam: Vendor 0x174f Product 0x1403
[ 47138.928] (--) evdev: Integrated Webcam: Found keys
[ 47138.928] (II) evdev: Integrated Webcam: Configuring as keyboard
[ 47138.928] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6/event6"
[ 47138.928] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 9)
[ 47138.928] (**) Option "xkb_rules" "evdev"
[ 47138.928] (**) Option "xkb_model" "evdev"
[ 47138.928] (**) Option "xkb_layout" "us"
[ 47138.930] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 47138.930] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 47138.930] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 47138.930] (**) AT Translated Set 2 keyboard: always reports core events
[ 47138.930] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 47138.930] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 47138.930] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 47138.930] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 47138.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 47138.930] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 47138.930] (**) Option "xkb_rules" "evdev"
[ 47138.930] (**) Option "xkb_model" "evdev"
[ 47138.930] (**) Option "xkb_layout" "us"
[ 47138.932] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 47138.932] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 47138.932] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 47138.932] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 47138.932] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 47138.932] (II) LoadModule: "synaptics"
[ 47138.933] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 47138.933] (II) Module synaptics: vendor="X.Org Foundation"
[ 47138.933] compiled for 1.13.1, module version = 1.6.2
[ 47138.933] Module class: X.Org XInput Driver
[ 47138.933] ABI class: X.Org XInput driver, version 18.0
[ 47138.933] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 47138.933] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 47138.933] (**) Option "Device" "/dev/input/event10"
[ 47138.939] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 47138.939] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5590
[ 47138.939] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4710
[ 47138.939] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 47138.939] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 47138.939] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 47138.939] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 47138.939] (**) Option "SHMConfig" "true"
[ 47138.939] (**) Option "AreaBottomEdge" "4100"
[ 47138.940] (**) Option "TapButton1" "1"
[ 47138.940] (**) Option "TapButton2" "2"
[ 47138.940] (**) Option "TapButton3" "3"
[ 47138.940] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 47138.940] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 47138.941] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 47138.941] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 47138.941] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 47138.941] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 47138.941] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 47138.942] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 47138.942] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 47138.942] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 47138.942] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 47138.942] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 47138.943] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 47138.943] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 47138.944] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 47138.944] (II) No input driver specified, ignoring this device.
[ 47138.944] (II) This device may have been added with another device file.
[ 47143.972] (II) intel(0): EDID vendor "BOE", prod id 1415
[ 47143.972] (II) intel(0): Printing DDC gathered Modelines:
[ 47143.972] (II) intel(0): Modeline "1024x600"x0.0 57.70 1024 1072 1104 1498 600 603 613 642 +hsync -vsync (38.5 kHz eP)
[ 47144.669] (II) intel(0): EDID vendor "BOE", prod id 1415
[ 47144.669] (II) intel(0): Printing DDC gathered Modelines:
[ 47144.669] (II) intel(0): Modeline "1024x600"x0.0 57.70 1024 1072 1104 1498 600 603 613 642 +hsync -vsync (38.5 kHz eP)

Si j'ai bien compris les infos du wiki et la sortie de xinput, le multitouch est bien géré non?
Encore merci!

[FoolEcho]

Je n'ai pas regardé tes sorties en détail (un peu pressé), mais je crois que tu es dans ce cas de figure (c'est à peu près comme ça que je comprends ton problème en tous cas):
https://wiki.archlinux.org/index.php/To ... ickPads.29

Si j'ai bien compris les infos du wiki et la sortie de xinput, le multitouch est bien géré non?

Ça a l'air, oui.
N'hésite pas à jouer avec synclient de toutes manières, c'est plus facile pour savoir ensuite quelles réglages conserver.

[matt73]

Ca ne t'aidera peut-être pas, mais chez moi l'installation du paquet xf86-input-synaptics règle en général une bonne partie de mes problèmes

[Jejel59]

Effectivement tu as tout à fait raison, je n'avais pas tout lu désolé..
J'ai ajouté les options proposées et le problème est résolu!

Option "ClickPad" "true"
Option "EmulateMidButtonTime" "0"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"

Il arrive juste que la souris "saute" de temps en temps lors du clique gauche mais sinon ça va!
Merci beaucoup pour ton aide et ta rapidité!