[crash] Système qui se bloque (résolu)

Questions et astuces concernant l'installation et la configuration d'archlinux
Répondre
Avatar de l’utilisateur
Shingo
archer de cavalerie
Messages : 151
Inscription : dim. 03 févr. 2013, 19:06

[crash] Système qui se bloque (résolu)

Message par Shingo »

Salut, je suis un peu embêter avec mon installation. Cela fait deux fois (une fois hier et une deuxième fois un instant) que le système se bloque, les diodes du clavier clignote (c'est la panique) et le PC finit par rebooter. Une fois ça me dérange pas mais sur le long terme ça risque de me prendre la tête. Apparement cela viendrais d'un pilote mais je ne sais pas où chercher en premier temps.

Voici ma configuration au détail :

Configuration
localhost
description: Ordinateur de Bureau
produit: 965P-DS4 ()
fabriquant: Gigabyte Technology Co., Ltd.
bits: 64 bits
fonctionnalités: smbios-2.4 dmi-2.4 vsyscall32
configuration: boot=normal chassis=desktop uuid=00000000-0000-0000-0000-0016E6D8E602
*-core
description: Carte mère
produit: 965P-DS4
fabriquant: Gigabyte Technology Co., Ltd.
identifiant matériel: 0
*-firmware
description: BIOS
fabriquant: Award Software International, Inc.
identifiant matériel: 0
version: F12
date: 06/25/2009
taille: 128KiB
capacité: 960KiB
fonctionnalités: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
produit: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
fabriquant: Intel Corp.
identifiant matériel: 4
information bus: cpu@0
version: Intel(R) Core(TM)2 CPU 6400
emplacement: Socket 775
taille: 2800MHz
capacité: 4GHz
bits: 64 bits
horloge: 350MHz
fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow
*-cache:0
description: L1 cache
identifiant matériel: a
emplacement: Internal Cache
taille: 64KiB
capacité: 64KiB
fonctionnalités: synchronous internal write-back
*-cache:1
description: L2 cache
identifiant matériel: b
emplacement: External Cache
taille: 2MiB
capacité: 2MiB
fonctionnalités: synchronous internal write-back
*-memory
description: Mémoire Système
identifiant matériel: 1b
emplacement: Carte mère
taille: 4GiB
*-bank:0
description: DIMMProject-Id-Version: @(#) $Id: fr.po 2151 2010-03-15 20:26:20Z lyonel $Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2009-10-08 14:06+0100Last-Translator: Lyonel Vincent <lyonel@ezix.org>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bit 667 MHz (1,5 ns)
identifiant matériel: 0
emplacement: A0
taille: 1GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-bank:1
description: DIMMProject-Id-Version: @(#) $Id: fr.po 2151 2010-03-15 20:26:20Z lyonel $Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2009-10-08 14:06+0100Last-Translator: Lyonel Vincent <lyonel@ezix.org>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bit 667 MHz (1,5 ns)
identifiant matériel: 1
emplacement: A1
taille: 1GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-bank:2
description: DIMMProject-Id-Version: @(#) $Id: fr.po 2151 2010-03-15 20:26:20Z lyonel $Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2009-10-08 14:06+0100Last-Translator: Lyonel Vincent <lyonel@ezix.org>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bit 667 MHz (1,5 ns)
identifiant matériel: 2
emplacement: A2
taille: 1GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-bank:3
description: DIMMProject-Id-Version: @(#) $Id: fr.po 2151 2010-03-15 20:26:20Z lyonel $Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2009-10-08 14:06+0100Last-Translator: Lyonel Vincent <lyonel@ezix.org>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bit 667 MHz (1,5 ns)
identifiant matériel: 3
emplacement: A3
taille: 1GiB
bits: 64 bits
horloge: 667MHz (1.5ns)
*-pci
description: Host bridge
produit: 82P965/G965 Memory Controller Hub
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 02
bits: 32 bits
horloge: 33MHz
*-pci:0
description: PCI bridge
produit: 82P965/G965 PCI Express Root Port
fabriquant: Intel Corporation
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:40 portE/S:8000(taille=4096) mémoire:f4000000-f5ffffff portE/S:e0000000(taille=268435456)
*-display
description: VGA compatible controller
produit: Turks [Radeon HD 6670]
fabriquant: Advanced Micro Devices [AMD] nee ATI
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=fglrx_pci latency=0
ressources: irq:48 mémoire:e0000000-efffffff mémoire:f5000000-f501ffff portE/S:8000(taille=256) mémoire:f4000000-f401ffff
*-multimedia
description: Audio device
produit: Turks/Whistler HDMI Audio [Radeon HD 6000 Series]
fabriquant: Advanced Micro Devices [AMD] nee ATI
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:46 mémoire:f5020000-f5023fff
*-usb:0
description: USB controller
produit: 82801H (ICH8 Family) USB UHCI Controller #4
fabriquant: Intel Corporation
identifiant matériel: 1a
information bus: pci@0000:00:1a.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:16 portE/S:c000(taille=32)
*-usb:1
description: USB controller
produit: 82801H (ICH8 Family) USB UHCI Controller #5
fabriquant: Intel Corporation
identifiant matériel: 1a.1
information bus: pci@0000:00:1a.1
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:21 portE/S:c400(taille=32)
*-usb:2
description: USB controller
produit: 82801H (ICH8 Family) USB2 EHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1a.7
information bus: pci@0000:00:1a.7
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
ressources: irq:18 mémoire:f8205000-f82053ff
*-multimedia
description: Audio device
produit: 82801H (ICH8 Family) HD Audio Controller
fabriquant: Intel Corporation
identifiant matériel: 1b
information bus: pci@0000:00:1b.0
version: 02
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:45 mémoire:f8200000-f8203fff
*-pci:1
description: PCI bridge
produit: 82801H (ICH8 Family) PCI Express Port 1
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:41 portE/S:7000(taille=4096) mémoire:f8300000-f84fffff portE/S:f8500000(taille=2097152)
*-pci:2
description: PCI bridge
produit: 82801H (ICH8 Family) PCI Express Port 5
fabriquant: Intel Corporation
identifiant matériel: 1c.4
information bus: pci@0000:00:1c.4
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:42 portE/S:9000(taille=4096) mémoire:f6000000-f7ffffff portE/S:f8700000(taille=3145728)
*-network
description: Ethernet interface
produit: 88E8056 PCI-E Gigabit Ethernet Controller
fabriquant: Marvell Technology Group Ltd.
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: enp3s0
version: 12
numéro de série: 00:16:e6:d8:e6:02
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair
ressources: irq:47 mémoire:f7000000-f7003fff portE/S:9000(taille=256) mémoire:f8700000-f871ffff
*-pci:3
description: PCI bridge
produit: 82801H (ICH8 Family) PCI Express Port 6
fabriquant: Intel Corporation
identifiant matériel: 1c.5
information bus: pci@0000:00:1c.5
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:43 portE/S:a000(taille=8192) mémoire:f8000000-f80fffff portE/S:f8a00000(taille=2097152)
*-storage
description: SATA controller
produit: JMB363 SATA/IDE Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0
information bus: pci@0000:04:00.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: storage pm pciexpress ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:17 mémoire:f8000000-f8001fff
*-ide
description: IDE interface
produit: JMB363 SATA/IDE Controller
fabriquant: JMicron Technology Corp.
identifiant matériel: 0.1
information bus: pci@0000:04:00.1
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: ide pm bus_master cap_list
configuration: driver=pata_jmicron latency=0
ressources: irq:18 portE/S:a000(taille=8) portE/S:a400(taille=4) portE/S:a800(taille=8) portE/S:ac00(taille=4) portE/S:b000(taille=16)
*-usb:3
description: USB controller
produit: 82801H (ICH8 Family) USB UHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d
information bus: pci@0000:00:1d.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:23 portE/S:c800(taille=32)
*-usb:4
description: USB controller
produit: 82801H (ICH8 Family) USB UHCI Controller #2
fabriquant: Intel Corporation
identifiant matériel: 1d.1
information bus: pci@0000:00:1d.1
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:19 portE/S:cc00(taille=32)
*-usb:5
description: USB controller
produit: 82801H (ICH8 Family) USB UHCI Controller #3
fabriquant: Intel Corporation
identifiant matériel: 1d.2
information bus: pci@0000:00:1d.2
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: uhci bus_master
configuration: driver=uhci_hcd latency=0
ressources: irq:18 portE/S:d000(taille=32)
*-usb:6
description: USB controller
produit: 82801H (ICH8 Family) USB2 EHCI Controller #1
fabriquant: Intel Corporation
identifiant matériel: 1d.7
information bus: pci@0000:00:1d.7
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
ressources: irq:23 mémoire:f8204000-f82043ff
*-pci:4
description: PCI bridge
produit: 82801 PCI Bridge
fabriquant: Intel Corporation
identifiant matériel: 1e
information bus: pci@0000:00:1e.0
version: f2
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci subtractive_decode bus_master cap_list
ressources: mémoire:f8100000-f81fffff
*-network
description: Interface réseau sans fil
produit: AR5212/AR5213 Wireless Network Adapter
fabriquant: Atheros Communications Inc.
identifiant matériel: 0
information bus: pci@0000:05:00.0
nom logique: wlp5s0
version: 01
numéro de série: 00:1b:2f:c6:fc:a6
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath5k ip=192.168.1.51 latency=168 maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg
ressources: irq:20 mémoire:f8100000-f810ffff
*-firewire
description: FireWire (IEEE 1394)
produit: TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
fabriquant: Texas Instruments
identifiant matériel: 6
information bus: pci@0000:05:06.0
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=32 maxlatency=4 mingnt=2
ressources: irq:18 mémoire:f8114000-f81147ff mémoire:f8110000-f8113fff
*-isa
description: ISA bridge
produit: 82801HB/HR (ICH8/R) LPC Interface Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 02
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
ressources: irq:0
*-storage
description: SATA controller
produit: 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA Controller [AHCI mode]
fabriquant: Intel Corporation
identifiant matériel: 1f.2
information bus: pci@0000:00:1f.2
version: 02
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:44 portE/S:d400(taille=8) portE/S:d800(taille=4) portE/S:dc00(taille=8) portE/S:e000(taille=4) portE/S:e400(taille=32) mémoire:f8206000-f82067ff
*-serial
description: SMBus
produit: 82801H (ICH8 Family) SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 02
bits: 32 bits
horloge: 33MHz
configuration: driver=i801_smbus latency=0
ressources: irq:18 mémoire:f8207000-f82070ff portE/S:500(taille=32)
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-cdrom
description: DVD writer
produit: DVD-RW DVR-109
fabriquant: PIONEER
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/sr0
version: 1.58
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=ready
*-medium
identifiant matériel: 0
nom logique: /dev/cdrom
*-scsi:1
identifiant matériel: 2
nom logique: scsi2
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: WDC WD6401AALS-0
fabriquant: Western Digital
identifiant matériel: 0.0.0
information bus: scsi@2:0.0.0
nom logique: /dev/sda
version: 01.0
numéro de série: WD-WMASY7431405
taille: 596GiB (640GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=000d6ee2
*-volume:0
description: Linux filesystem partition
fabriquant: Linux
identifiant matériel: 1
information bus: scsi@2:0.0.0,1
nom logique: /dev/sda1
nom logique: /boot
version: 1.0
numéro de série: 98784425-a0be-4186-9924-bd0e9bd0f4ac
taille: 94MiB
capacité: 94MiB
fonctionnalités: primary bootable extended_attributes ext2 initialized
configuration: filesystem=ext2 lastmountpoint=/boot modified=2013-02-06 20:48:07 mount.fstype=ext2 mount.options=rw,relatime mounted=2013-02-06 20:48:07 state=mounted
*-volume:1
description: Linux swap volume
identifiant matériel: 2
information bus: scsi@2:0.0.0,2
nom logique: /dev/sda2
version: 1
numéro de série: 886350d3-2bc8-43d7-a071-d8db23b34d4c
taille: 3859MiB
capacité: 3859MiB
fonctionnalités: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:2
description: EXT4 volume
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@2:0.0.0,3
nom logique: /dev/sda3
nom logique: /
nom logique: /home
version: 1.0
numéro de série: 52077b36-05bc-4d73-bd92-26b56d9dc760
taille: 592GiB
capacité: 592GiB
fonctionnalités: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2013-02-05 12:40:47 filesystem=ext4 lastmountpoint=/ modified=2013-02-06 22:39:09 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2013-02-06 22:39:11 state=mounted
*-scsi:2
identifiant matériel: 3
nom logique: scsi3
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: WDC WD2500KS-00M
fabriquant: Western Digital
identifiant matériel: 0.0.0
information bus: scsi@3:0.0.0
nom logique: /dev/sdb
version: 02.0
numéro de série: WD-WCANKF180228
taille: 232GiB (250GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=c33b37e0
*-volume
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@3:0.0.0,1
nom logique: /dev/sdb1
nom logique: /media/sdb1
version: 3.1
numéro de série: d2f8562e-bc54-d640-b781-a3bfb236c0d3
taille: 232GiB
capacité: 232GiB
fonctionnalités: primary bootable ntfs initialized
configuration: clustersize=4096 created=2009-09-29 07:44:52 filesystem=ntfs mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
*-scsi:3
identifiant matériel: 5
nom logique: scsi4
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: ST3250410AS
fabriquant: Seagate
identifiant matériel: 0.0.0
information bus: scsi@4:0.0.0
nom logique: /dev/sdc
version: 3.AA
numéro de série: 6RY0LPQ9
taille: 232GiB (250GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=913f4b62
*-volume
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@4:0.0.0,1
nom logique: /dev/sdc1
nom logique: /media/sdc
version: 3.1
numéro de série: f065de53-b2b3-1c42-a91e-b13f2c567661
taille: 232GiB
capacité: 232GiB
fonctionnalités: primary bootable ntfs initialized
configuration: clustersize=4096 created=2010-07-27 08:47:32 filesystem=ntfs mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
*-scsi:4
identifiant matériel: 6
nom logique: scsi5
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: ST3250824AS
fabriquant: Seagate
identifiant matériel: 0.0.0
information bus: scsi@5:0.0.0
nom logique: /dev/sdd
version: 3.AA
numéro de série: 3ND2EWTR
taille: 232GiB (250GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=c45277dc
*-volume
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@5:0.0.0,1
nom logique: /dev/sdd1
nom logique: /media/sdd
version: 3.1
numéro de série: 42aac80b-0fa5-5e47-9cb8-ac840873e63e
taille: 232GiB
capacité: 232GiB
fonctionnalités: primary bootable ntfs initialized
configuration: clustersize=4096 created=2008-06-30 00:35:02 filesystem=ntfs mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
*-scsi:5
identifiant matériel: 7
information bus: usb@1:3
nom logique: scsi10
fonctionnalités: emulated scsi-host
configuration: driver=usb-storage
*-disk:0
description: SCSI Disk
identifiant matériel: 0.0.0
information bus: scsi@10:0.0.0
nom logique: /dev/sde
configuration: sectorsize=512
*-disk:1
description: SCSI Disk
identifiant matériel: 0.0.1
information bus: scsi@10:0.0.1
nom logique: /dev/sdf
configuration: sectorsize=512
*-disk:2
description: SCSI Disk
identifiant matériel: 0.0.2
information bus: scsi@10:0.0.2
nom logique: /dev/sdg
configuration: sectorsize=512
*-disk:3
description: SCSI Disk
identifiant matériel: 0.0.3
information bus: scsi@10:0.0.3
nom logique: /dev/sdh
configuration: sectorsize=512
Merci :)
Dernière modification par Shingo le dim. 24 févr. 2013, 14:34, modifié 1 fois.
Haut
Avatar de l’utilisateur
GuilouV
Elfe
Messages : 539
Inscription : jeu. 25 nov. 2010, 15:34

Re: [crash] Système qui se bloque

Message par GuilouV »

C'est un peu vague...
Ce souci arrive-t-il à des instants précis? (après un temps de fonction ou après lancement d'un soft...)
Pour commencer quelles sont les sorties de dmesg et journalctl après un crash?
[ Vaio S (VJS131X0211B) ]==[ Arch64 i3 Bépo ]==[ KISS spirit ]
Haut
Avatar de l’utilisateur
Shingo
archer de cavalerie
Messages : 151
Inscription : dim. 03 févr. 2013, 19:06

Re: [crash] Système qui se bloque

Message par Shingo »

dmesg

Code : Tout sélectionner

[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xdfedffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000] On node 0 totalpages: 1048173
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3911 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 896800 pages, LIFO batch:31
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 129024 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
[    0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[    0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[    0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s84608 r8192 d21888 u524288
[    0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029735
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4046292k/4718592k available (4883k kernel code, 525900k absent, 146400k reserved, 4030k data, 812k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2800.028 MHz processor
[    0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.39 BogoMIPS (lpj=9333426)
[    0.003340] pid_max: default: 32768 minimum: 301
[    0.003374] Security Framework initialized
[    0.003387] AppArmor: AppArmor disabled by boot time parameter
[    0.003694] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008254] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009234] Mount-cache hash table entries: 256
[    0.009496] Initializing cgroup subsys cpuacct
[    0.009501] Initializing cgroup subsys memory
[    0.009512] Initializing cgroup subsys devices
[    0.009513] Initializing cgroup subsys freezer
[    0.009515] Initializing cgroup subsys net_cls
[    0.009516] Initializing cgroup subsys blkio
[    0.009546] CPU: Physical Processor ID: 0
[    0.009547] CPU: Processor Core ID: 0
[    0.009550] mce: CPU supports 6 MCE banks
[    0.009557] CPU0: Thermal monitoring enabled (TM1)
[    0.009562] process: using mwait in idle threads
[    0.009567] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[    0.009655] Freeing SMP alternatives: 16k freed
[    0.010708] ACPI: Core revision 20120913
[    0.012678] ftrace: allocating 18793 entries in 74 pages
[    0.017086] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.050744] smpboot: CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (fam: 06, model: 0f, stepping: 06)
[    0.053333] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.053333] perf_event_intel: PEBS disabled due to CPU errata
[    0.053333] ... version:                2
[    0.053333] ... bit width:              40
[    0.053333] ... generic registers:      2
[    0.053333] ... value mask:             000000ffffffffff
[    0.053333] ... max period:             000000007fffffff
[    0.053333] ... fixed-purpose events:   3
[    0.053333] ... event mask:             0000000700000003
[    0.089912] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076710] smpboot: Booting Node   0, Processors  #1
[    0.089925] Brought up 2 CPUs
[    0.089928] smpboot: Total of 2 processors activated (11204.78 BogoMIPS)
[    0.090082] devtmpfs: initialized
[    0.091096] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
[    0.091096] RTC time: 21:39:07, date: 02/06/13
[    0.091096] NET: Registered protocol family 16
[    0.091096] ACPI: bus type pci registered
[    0.091096] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.091096] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.098221] PCI: Using configuration type 1 for base access
[    0.098712] bio: create slab <bio-0> at 0
[    0.098712] ACPI: Added _OSI(Module Device)
[    0.098712] ACPI: Added _OSI(Processor Device)
[    0.098712] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.098712] ACPI: Added _OSI(Processor Aggregator Device)
[    0.098712] ACPI: EC: Look up EC in DSDT
[    0.101855] ACPI: Interpreter enabled
[    0.101862] ACPI: (supports S0 S1 S4 S5)
[    0.101881] ACPI: Using IOAPIC for interrupt routing
[    0.105040] ACPI: No dock devices found.
[    0.105044] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.105086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.105172] PCI host bridge to bus 0000:00
[    0.105175] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.105177] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.105179] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.105181] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.105183] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.105185] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff]
[    0.105194] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
[    0.105230] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400
[    0.105262] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.105292] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.105326] pci 0000:00:1a.0: reg 20: [io  0xc000-0xc01f]
[    0.105354] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.105388] pci 0000:00:1a.1: reg 20: [io  0xc400-0xc41f]
[    0.105421] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.105436] pci 0000:00:1a.7: reg 10: [mem 0xf8205000-0xf82053ff]
[    0.105513] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.105526] pci 0000:00:1b.0: reg 10: [mem 0xf8200000-0xf8203fff 64bit]
[    0.105583] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.105601] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.105659] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.105680] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.105737] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.105757] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[    0.105814] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.105832] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.105866] pci 0000:00:1d.0: reg 20: [io  0xc800-0xc81f]
[    0.105892] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.105926] pci 0000:00:1d.1: reg 20: [io  0xcc00-0xcc1f]
[    0.105953] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.105987] pci 0000:00:1d.2: reg 20: [io  0xd000-0xd01f]
[    0.106020] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.106034] pci 0000:00:1d.7: reg 10: [mem 0xf8204000-0xf82043ff]
[    0.106107] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.106160] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[    0.106231] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.106234] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.106276] pci 0000:00:1f.2: [8086:2821] type 00 class 0x010601
[    0.106290] pci 0000:00:1f.2: reg 10: [io  0xd400-0xd407]
[    0.106297] pci 0000:00:1f.2: reg 14: [io  0xd800-0xd803]
[    0.106304] pci 0000:00:1f.2: reg 18: [io  0xdc00-0xdc07]
[    0.106310] pci 0000:00:1f.2: reg 1c: [io  0xe000-0xe003]
[    0.106317] pci 0000:00:1f.2: reg 20: [io  0xe400-0xe41f]
[    0.106324] pci 0000:00:1f.2: reg 24: [mem 0xf8206000-0xf82067ff]
[    0.106358] pci 0000:00:1f.2: PME# supported from D3hot
[    0.106372] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.106382] pci 0000:00:1f.3: reg 10: [mem 0xf8207000-0xf82070ff]
[    0.106404] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.106456] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000
[    0.106470] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.106480] pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf501ffff 64bit]
[    0.106488] pci 0000:01:00.0: reg 20: [io  0x8000-0x80ff]
[    0.106501] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.106533] pci 0000:01:00.0: supports D1 D2
[    0.106553] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[    0.106566] pci 0000:01:00.1: reg 10: [mem 0xf5020000-0xf5023fff 64bit]
[    0.106625] pci 0000:01:00.1: supports D1 D2
[    0.106673] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.106675] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.106678] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.106682] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.106714] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.106718] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    0.106775] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[    0.106796] pci 0000:03:00.0: reg 10: [mem 0xf7000000-0xf7003fff 64bit]
[    0.106807] pci 0000:03:00.0: reg 18: [io  0x9000-0x90ff]
[    0.106845] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.106906] pci 0000:03:00.0: supports D1 D2
[    0.106908] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.113347] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.113350] pci 0000:00:1c.4:   bridge window [io  0x9000-0x9fff]
[    0.113354] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.113406] pci 0000:04:00.0: [197b:2363] type 00 class 0x010601
[    0.113486] pci 0000:04:00.0: reg 24: [mem 0xf8000000-0xf8001fff]
[    0.113544] pci 0000:04:00.0: PME# supported from D3hot
[    0.113574] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
[    0.113596] pci 0000:04:00.1: reg 10: [io  0xa000-0xa007]
[    0.113608] pci 0000:04:00.1: reg 14: [io  0xa400-0xa403]
[    0.113621] pci 0000:04:00.1: reg 18: [io  0xa800-0xa807]
[    0.113634] pci 0000:04:00.1: reg 1c: [io  0xac00-0xac03]
[    0.113646] pci 0000:04:00.1: reg 20: [io  0xb000-0xb00f]
[    0.113723] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.113732] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.113735] pci 0000:00:1c.5:   bridge window [io  0xa000-0xbfff]
[    0.113738] pci 0000:00:1c.5:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.113768] pci 0000:05:00.0: [168c:0013] type 00 class 0x020000
[    0.113783] pci 0000:05:00.0: reg 10: [mem 0xf8100000-0xf810ffff]
[    0.113869] pci 0000:05:06.0: [104c:8024] type 00 class 0x0c0010
[    0.113884] pci 0000:05:06.0: reg 10: [mem 0xf8114000-0xf81147ff]
[    0.113893] pci 0000:05:06.0: reg 14: [mem 0xf8110000-0xf8113fff]
[    0.113954] pci 0000:05:06.0: supports D1 D2
[    0.113956] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot
[    0.113991] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.113996] pci 0000:00:1e.0:   bridge window [mem 0xf8100000-0xf81fffff]
[    0.114001] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.114003] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.114005] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.114007] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.114009] pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[    0.114027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.114099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.114127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.114149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.114177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.114243]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.114245]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.119486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.119524] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.119559] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.119593] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.119627] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.119662] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[    0.119696] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.119730] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.119792] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.119792] vgaarb: loaded
[    0.119792] vgaarb: bridge control possible 0000:01:00.0
[    0.119792] PCI: Using ACPI for IRQ routing
[    0.121042] PCI: pci_cache_line_size set to 64 bytes
[    0.121106] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.121108] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
[    0.121199] NetLabel: Initializing
[    0.121201] NetLabel:  domain hash size = 128
[    0.121202] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.121213] NetLabel:  unlabeled traffic allowed by default
[    0.121224] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.121228] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.121231] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.130010] Switching to clocksource hpet
[    0.135439] pnp: PnP ACPI init
[    0.135462] ACPI: bus type pnp registered
[    0.135547] pnp 00:00: [bus 00-3f]
[    0.135550] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.135552] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.135554] pnp 00:00: [io  0x0d00-0xffff window]
[    0.135556] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.135558] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.135560] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[    0.135606] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.135664] pnp 00:01: [io  0x0010-0x001f]
[    0.135666] pnp 00:01: [io  0x0022-0x003f]
[    0.135668] pnp 00:01: [io  0x0044-0x005f]
[    0.135670] pnp 00:01: [io  0x0062-0x0063]
[    0.135671] pnp 00:01: [io  0x0065-0x006f]
[    0.135673] pnp 00:01: [io  0x0074-0x007f]
[    0.135675] pnp 00:01: [io  0x0091-0x0093]
[    0.135676] pnp 00:01: [io  0x00a2-0x00bf]
[    0.135678] pnp 00:01: [io  0x00e0-0x00ef]
[    0.135680] pnp 00:01: [io  0x04d0-0x04d1]
[    0.135681] pnp 00:01: [io  0x0290-0x029f]
[    0.135683] pnp 00:01: [io  0x0800-0x087f]
[    0.135685] pnp 00:01: [io  0x0290-0x0294]
[    0.135686] pnp 00:01: [io  0x0880-0x088f]
[    0.135742] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.135745] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.135747] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.135749] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.135751] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.135754] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135764] pnp 00:02: [dma 4]
[    0.135766] pnp 00:02: [io  0x0000-0x000f]
[    0.135767] pnp 00:02: [io  0x0080-0x0090]
[    0.135769] pnp 00:02: [io  0x0094-0x009f]
[    0.135771] pnp 00:02: [io  0x00c0-0x00df]
[    0.135793] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.135832] pnp 00:03: [irq 0 disabled]
[    0.135845] pnp 00:03: [irq 8]
[    0.135847] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.135867] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.135886] pnp 00:04: [io  0x0070-0x0073]
[    0.135913] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.135923] pnp 00:05: [io  0x0061]
[    0.135943] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.135950] pnp 00:06: [io  0x00f0-0x00ff]
[    0.135955] pnp 00:06: [irq 13]
[    0.135978] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.136141] pnp 00:07: [io  0x03f8-0x03ff]
[    0.136146] pnp 00:07: [irq 4]
[    0.136193] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.136320] pnp 00:08: [io  0x0378-0x037f]
[    0.136325] pnp 00:08: [irq 7]
[    0.136360] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.136423] pnp 00:09: [io  0x0060]
[    0.136425] pnp 00:09: [io  0x0064]
[    0.136430] pnp 00:09: [irq 1]
[    0.136453] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.136476] pnp 00:0a: [io  0x0400-0x04bf]
[    0.136506] system 00:0a: [io  0x0400-0x04bf] has been reserved
[    0.136509] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136641] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[    0.136703] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.136706] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136813] pnp 00:0c: [mem 0x000d6000-0x000d7fff]
[    0.136815] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[    0.136817] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[    0.136819] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[    0.136821] pnp 00:0c: [mem 0xdfee0000-0xdfefffff]
[    0.136823] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.136824] pnp 00:0c: [mem 0x00100000-0xdfedffff]
[    0.136826] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.136828] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[    0.136829] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[    0.136831] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.136833] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[    0.136835] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[    0.136836] pnp 00:0c: [mem 0x000e0000-0x000effff]
[    0.136880] system 00:0c: [mem 0x000d6000-0x000d7fff] has been reserved
[    0.136882] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.136885] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.136887] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.136889] system 00:0c: [mem 0xdfee0000-0xdfefffff] could not be reserved
[    0.136891] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.136893] system 00:0c: [mem 0x00100000-0xdfedffff] could not be reserved
[    0.136896] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.136898] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.136900] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.136902] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.136904] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.136911] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.136913] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[    0.136916] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.136930] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[    0.136954] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[    0.136959] pnp: PnP ACPI: found 14 devices
[    0.136960] ACPI: ACPI bus type pnp unregistered
[    0.143491] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.143494] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.143502] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03] add_size 200000
[    0.143510] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.143520] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.143522] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.143524] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[    0.143526] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.143531] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8300000-0xf84fffff]
[    0.143535] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8500000-0xf86fffff 64bit pref]
[    0.143538] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8700000-0xf89fffff pref]
[    0.143541] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.143544] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.143547] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.143549] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.143552] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.143555] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.143558] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.143561] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    0.143565] pci 0000:00:1c.0:   bridge window [mem 0xf8300000-0xf84fffff]
[    0.143568] pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf86fffff 64bit pref]
[    0.143573] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8700000-0xf871ffff pref]
[    0.143575] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.143578] pci 0000:00:1c.4:   bridge window [io  0x9000-0x9fff]
[    0.143582] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.143585] pci 0000:00:1c.4:   bridge window [mem 0xf8700000-0xf89fffff pref]
[    0.143590] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.143593] pci 0000:00:1c.5:   bridge window [io  0xa000-0xbfff]
[    0.143597] pci 0000:00:1c.5:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.143600] pci 0000:00:1c.5:   bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.143605] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.143609] pci 0000:00:1e.0:   bridge window [mem 0xf8100000-0xf81fffff]
[    0.143642] pci 0000:00:1e.0: setting latency timer to 64
[    0.143645] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.143647] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.143649] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.143651] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.143653] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[    0.143655] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
[    0.143657] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.143659] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.143661] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
[    0.143663] pci_bus 0000:02: resource 1 [mem 0xf8300000-0xf84fffff]
[    0.143664] pci_bus 0000:02: resource 2 [mem 0xf8500000-0xf86fffff 64bit pref]
[    0.143666] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.143668] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.143670] pci_bus 0000:03: resource 2 [mem 0xf8700000-0xf89fffff pref]
[    0.143672] pci_bus 0000:04: resource 0 [io  0xa000-0xbfff]
[    0.143674] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf80fffff]
[    0.143676] pci_bus 0000:04: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.143678] pci_bus 0000:05: resource 1 [mem 0xf8100000-0xf81fffff]
[    0.143680] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.143682] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.143684] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.143686] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.143687] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[    0.143722] NET: Registered protocol family 2
[    0.144368] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.148076] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.148564] TCP: Hash tables configured (established 524288 bind 65536)
[    0.148625] TCP: reno registered
[    0.148634] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.148673] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.148804] NET: Registered protocol family 1
[    0.149022] pci 0000:01:00.0: Boot video device
[    0.149037] PCI: CLS 32 bytes, default 64
[    0.149094] Unpacking initramfs...
[    0.198397] Freeing initrd memory: 2896k freed
[    0.199256] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.199260] software IO TLB [mem 0xdbede000-0xdfeddfff] (64MB) mapped at [ffff8800dbede000-ffff8800dfeddfff]
[    0.199652] audit: initializing netlink socket (disabled)
[    0.199682] type=2000 audit(1360186747.196:1): initialized
[    0.209542] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.211205] VFS: Disk quotas dquot_6.5.2
[    0.211247] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.211409] msgmni has been set to 7908
[    0.211612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.211645] io scheduler noop registered
[    0.211647] io scheduler deadline registered
[    0.211675] io scheduler cfq registered (default)
[    0.211787] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.211856] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.211931] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.212007] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.212139] intel_idle: does not run on family 6 model 15
[    0.212171] GHES: HEST is not enabled!
[    0.212219] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.232714] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.233053] Linux agpgart interface v0.103
[    0.233115] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.233117] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.233241] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.233330] mousedev: PS/2 mouse device common for all mice
[    0.233402] rtc_cmos 00:04: RTC can wake from S4
[    0.233516] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.233539] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.233547] cpuidle: using governor ladder
[    0.233549] cpuidle: using governor menu
[    0.233594] drop_monitor: Initializing network drop monitor service
[    0.233657] TCP: cubic registered
[    0.233751] NET: Registered protocol family 10
[    0.233883] NET: Registered protocol family 17
[    0.233891] Key type dns_resolver registered
[    0.234085] PM: Hibernation image not present or could not be loaded.
[    0.234095] registered taskstats version 1
[    0.234645]   Magic number: 1:785:701
[    0.234735] rtc_cmos 00:04: setting system clock to 2013-02-06 21:39:07 UTC (1360186747)
[    0.235911] Freeing unused kernel memory: 812k freed
[    0.236095] Write protecting the kernel read-only data: 8192k
[    0.238971] Freeing unused kernel memory: 1248k freed
[    0.240332] Freeing unused kernel memory: 476k freed
[    0.246949] systemd-udevd[45]: starting version 197
[    0.251550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.273635] ACPI: bus type usb registered
[    0.273665] usbcore: registered new interface driver usbfs
[    0.273685] usbcore: registered new interface driver hub
[    0.273737] usbcore: registered new device driver usb
[    0.274128] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.274181] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.274185] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.274191] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.277656] SCSI subsystem initialized
[    0.278120] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.278140] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8205000
[    0.278743] ACPI: bus type scsi registered
[    0.279201] libata version 3.00 loaded.
[    0.279375] pata_jmicron 0000:04:00.1: setting latency timer to 64
[    0.280089] scsi0 : pata_jmicron
[    0.281067] scsi1 : pata_jmicron
[    0.281755] ata1: PATA max UDMA/100 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 18
[    0.281759] ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 18
[    0.286704] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.286883] hub 1-0:1.0: USB hub found
[    0.286888] hub 1-0:1.0: 4 ports detected
[    0.287028] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.287032] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.287037] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.290932] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.290952] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8204000
[    0.300021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.300170] hub 2-0:1.0: USB hub found
[    0.300174] hub 2-0:1.0: 6 ports detected
[    0.300311] ahci 0000:00:1f.2: version 3.0
[    0.300367] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.300405] ahci: SSS flag set, parallel bus scan disabled
[    0.300434] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.300437] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
[    0.300440] ahci 0000:00:1f.2: setting latency timer to 64
[    0.333923] scsi2 : ahci
[    0.333998] scsi3 : ahci
[    0.334060] scsi4 : ahci
[    0.334126] scsi5 : ahci
[    0.334189] scsi6 : ahci
[    0.334255] scsi7 : ahci
[    0.334300] ata3: SATA max UDMA/133 abar m2048@0xf8206000 port 0xf8206100 irq 44
[    0.334303] ata4: SATA max UDMA/133 abar m2048@0xf8206000 port 0xf8206180 irq 44
[    0.334305] ata5: SATA max UDMA/133 abar m2048@0xf8206000 port 0xf8206200 irq 44
[    0.334308] ata6: SATA max UDMA/133 abar m2048@0xf8206000 port 0xf8206280 irq 44
[    0.334310] ata7: SATA max UDMA/133 abar m2048@0xf8206000 port 0xf8206300 irq 44
[    0.334312] ata8: SATA max UDMA/133 abar m2048@0xf8206000 port 0xf8206380 irq 44
[    0.346703] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.346706] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.347032] scsi8 : ahci
[    0.347102] scsi9 : ahci
[    0.347153] ata9: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000100 irq 17
[    0.347157] ata10: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000180 irq 17
[    0.440626] ata1.00: ATAPI: PIONEER DVD-RW  DVR-109, 1.58, max UDMA/66
[    0.440631] ata1.00: limited to UDMA/33 due to 40-wire cable
[    0.453895] ata1.00: configured for UDMA/33
[    0.466850] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-109  1.58 PQ: 0 ANSI: 5
[    0.653349] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.654191] ata3.00: HPA detected: current 1250261615, native 1250263728
[    0.654259] ata3.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133
[    0.654261] ata3.00: 1250261615 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    0.655709] ata3.00: configured for UDMA/133
[    0.655784] scsi 2:0:0:0: Direct-Access     ATA      WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5
[    0.660031] ata9: SATA link down (SStatus 0 SControl 300)
[    0.660067] ata10: SATA link down (SStatus 0 SControl 300)
[    0.700014] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    0.973351] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.973887] ata4.00: HPA detected: current 488395055, native 488397168
[    0.973890] ata4.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[    0.973892] ata4.00: 488395055 sectors, multi 0: LBA48 
[    0.974476] ata4.00: configured for UDMA/133
[    0.974563] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[    1.006682] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[    1.133717] Initializing USB Mass Storage driver...
[    1.133856] scsi10 : usb-storage 1-3:1.0
[    1.133919] usbcore: registered new interface driver usb-storage
[    1.133921] USB Mass Storage support registered.
[    1.200013] tsc: Refined TSC clocksource calibration: 2799.999 MHz
[    1.200017] Switching to clocksource tsc
[    1.293348] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.293916] ata5.00: HPA detected: current 488395055, native 488397168
[    1.293920] ata5.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133
[    1.293922] ata5.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.294584] ata5.00: configured for UDMA/133
[    1.294678] scsi 4:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.613346] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.655841] ata6.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
[    1.655844] ata6.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.714141] ata6.00: configured for UDMA/133
[    1.714208] scsi 5:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
[    2.033344] ata7: SATA link down (SStatus 0 SControl 300)
[    2.137373] scsi 10:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.137999] scsi 10:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.138623] scsi 10:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.139248] scsi 10:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.353347] ata8: SATA link down (SStatus 0 SControl 300)
[    2.353857] uhci_hcd: USB Universal Host Controller Interface driver
[    2.353896] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.353900] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.354186] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.354225] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
[    2.354469] hub 3-0:1.0: USB hub found
[    2.354474] hub 3-0:1.0: 2 ports detected
[    2.354564] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.354567] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.354573] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.354600] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
[    2.354782] hub 4-0:1.0: USB hub found
[    2.354786] hub 4-0:1.0: 2 ports detected
[    2.354865] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.354867] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.354874] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.354896] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
[    2.355060] hub 5-0:1.0: USB hub found
[    2.355064] hub 5-0:1.0: 2 ports detected
[    2.355143] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.355146] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.355151] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.355178] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[    2.355738] hub 6-0:1.0: USB hub found
[    2.355742] hub 6-0:1.0: 2 ports detected
[    2.355820] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.355823] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.355828] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.355851] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[    2.355960] hub 7-0:1.0: USB hub found
[    2.355964] hub 7-0:1.0: 2 ports detected
[    2.364508] sd 2:0:0:0: [sda] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
[    2.364554] sd 2:0:0:0: [sda] Write Protect is off
[    2.364556] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.364575] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.366167] sd 3:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[    2.366178] sd 4:0:0:0: [sdc] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[    2.366214] sd 3:0:0:0: [sdb] Write Protect is off
[    2.366217] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.366223] sd 4:0:0:0: [sdc] Write Protect is off
[    2.366225] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.366235] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.366244] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.366518] sd 5:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.366557] sd 5:0:0:0: [sdd] Write Protect is off
[    2.366560] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.366577] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.372184]  sdc: sdc1
[    2.372446] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.373516] sd 10:0:0:0: [sde] Attached SCSI removable disk
[    2.373589]  sdb: sdb1
[    2.373837] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.374260] sd 10:0:0:1: [sdf] Attached SCSI removable disk
[    2.375013] sd 10:0:0:2: [sdg] Attached SCSI removable disk
[    2.375764] sd 10:0:0:3: [sdh] Attached SCSI removable disk
[    2.379126]  sda: sda1 sda2 sda3
[    2.379488] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.386883]  sdd: sdd1
[    2.387552] sd 5:0:0:0: [sdd] Attached SCSI disk
[    2.394542] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[    2.394546] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.394769] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.406729] firewire_ohci 0000:05:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.660018] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.849824] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
[    2.849925] hid-generic 0003:046D:C041.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1/input0
[    2.856400] hid-generic 0003:046D:C041.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1a.0-1/input1
[    2.856421] usbcore: registered new interface driver usbhid
[    2.856422] usbhid: USB HID core driver
[    2.906773] firewire_core 0000:05:06.0: created device fw0: GUID 0016e60000bfe403, S400
[    2.946687] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    3.084054] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.146958] input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input2
[    3.146998] hid-generic 0003:046D:C216.0003: input,hidraw2: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:1d.2-1/input0
[    3.567409] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.570106] systemd[1]: No hostname configured.
[    3.570111] systemd[1]: Set hostname to <localhost>.
[    3.743293] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.743354] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.743368] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.743673] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.743681] systemd[1]: Starting Delayed Shutdown Socket.
[    3.743956] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.743966] systemd[1]: Starting Encrypted Volumes.
[    3.744221] systemd[1]: Reached target Encrypted Volumes.
[    3.744235] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.744267] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.744297] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.744646] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.744703] systemd[1]: Starting udev Kernel Socket.
[    3.744971] systemd[1]: Listening on udev Kernel Socket.
[    3.745012] systemd[1]: Starting udev Control Socket.
[    3.745281] systemd[1]: Listening on udev Control Socket.
[    3.745291] systemd[1]: Expecting device dev-disk-by\x2duuid-886350d3\x2d2bc8\x2d43d7\x2da071\x2dd8db23b34d4c.device...
[    3.745474] systemd[1]: Expecting device dev-disk-by\x2duuid-98784425\x2da0be\x2d4186\x2d9924\x2dbd0e9bd0f4ac.device...
[    3.745657] systemd[1]: Expecting device dev-disk-by\x2duuid-52077b36\x2d05bc\x2d4d73\x2dbd92\x2d26b56d9dc760.device...
[    3.745839] systemd[1]: Expecting device dev-sdb1.device...
[    3.746018] systemd[1]: Expecting device dev-sdc1.device...
[    3.746196] systemd[1]: Expecting device dev-sdd1.device...
[    3.746376] systemd[1]: Starting Journal Socket.
[    3.746683] systemd[1]: Listening on Journal Socket.
[    3.746693] systemd[1]: Mounting Temporary Directory...
[    3.773509] systemd[1]: Started File System Check on Root Device.
[    3.773529] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.780140] systemd[1]: Mounting POSIX Message Queue File System...
[    3.799605] systemd[1]: Starting udev Kernel Device Manager...
[    3.806794] systemd[1]: Mounting Debug File System...
[    3.814516] systemd[1]: Starting Apply Kernel Variables...
[    3.820146] systemd[1]: Mounting Huge Pages File System...
[    3.823964] systemd[1]: Started Set Up Additional Binary Formats.
[    3.824034] systemd[1]: Starting udev Coldplug all Devices...
[    3.830146] systemd[1]: Starting Setup Virtual Console...
[    3.842139] systemd[1]: Started Load Kernel Modules.
[    3.842167] systemd[1]: Mounting Configuration File System...
[    3.846792] systemd[1]: Mounted FUSE Control File System.
[    3.846817] systemd[1]: Starting Journal Service...
[    3.853984] systemd[1]: Started Journal Service.
[    3.860373] systemd[1]: Started Apply Kernel Variables.
[    4.061299] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    4.107264] systemd-udevd[151]: starting version 197
[    4.575667] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xcb
[    4.604560] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xcb
[    4.605125] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.467039] ACPI: Invalid Power Resource to register!
[    4.651649] ACPI Warning: 
[    4.651654] 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120913/utaddress-251)
[    4.651657] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.651679] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.673802] gpio_ich: GPIO from 206 to 255 on gpio_ich
[    4.701944] iTCO_vendor_support: vendor-support=0
[    4.744200] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    4.820707] coretemp coretemp.0: Using relative temperature scale!
[    4.820719] coretemp coretemp.0: Using relative temperature scale!
[    4.838987] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    4.839007] ACPI: Power Button [PWRB]
[    4.839140] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    4.839144] ACPI: Power Button [PWRF]
[    4.846644] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    4.848727] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    4.848730] AMD IOMMUv2 functionality not available on this system
[    4.918097] IT8718 SuperIO detected.
[    4.918356] parport_pc 00:08: reported by Plug and Play ACPI
[    4.918398] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    4.919843] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    4.930969] ppdev: user-space parallel port driver
[    4.933800] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    4.933850] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
[    4.933962] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.934697] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    4.934773] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.934838] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.934902] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.934965] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.935029] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.935090] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.935154] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.935467] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    4.936342] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[    4.936410] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[    4.984886] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    5.020329] cfg80211: Calling CRDA to update world regulatory domain
[    5.177060] sky2: driver version 1.30
[    5.177159] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[    5.177248] sky2 0000:03:00.0: irq 47 for MSI/MSI-X
[    5.177482] sky2 0000:03:00.0 eth0: addr 00:16:e6:d8:e6:02
[    5.188340] ath5k 0000:05:00.0: registered as 'phy0'
[    5.246022] usbcore: registered new interface driver snd-usb-audio
[    5.253006] media: Linux media interface: v0.10
[    5.256319] Linux video capture interface: v2.00
[    5.267194] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
[    5.271571] input: Webcam C170 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input16
[    5.271653] usbcore: registered new interface driver uvcvideo
[    5.271654] USB Video Class driver (1.1.1)
[    5.282656] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    5.282660] Disabling lock debugging due to kernel taint
[    5.292485] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3794 MBytes.
[    5.292723] <6>[fglrx]   vendor: 1002 device: 6758 count: 1
[    5.293183] <6>[fglrx] ioport: bar 4, base 0x8000, size: 0x100
[    5.293547] <6>[fglrx] Kernel PAT support is enabled
[    5.293569] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors
[    5.320134] systemd-udevd[172]: renamed network interface eth0 to enp3s0
[    5.800502] ath: EEPROM regdomain: 0x0
[    5.800506] ath: EEPROM indicates default country code should be used
[    5.800507] ath: doing EEPROM country->regdmn map search
[    5.800509] ath: country maps to regdmn code: 0x3a
[    5.800510] ath: Country alpha2 being used: US
[    5.800512] ath: Regpair used: 0x3a
[    5.843141] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.843360] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[    5.846790] systemd-udevd[176]: renamed network interface wlan0 to wlp5s0
[    6.020360] Adding 3951984k swap on /dev/sda2.  Priority:-1 extents:1 across:3951984k 
[    6.210286] fuse init (API version 7.20)
[    6.465392] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    6.469680] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    8.335520] FS-Cache: Loaded
[    8.346064] FS-Cache: Netfs 'cifs' registered for caching
[    8.346210] Key type cifs.spnego registered
[    8.346217] Key type cifs.idmap registered
[    8.630391] CIFS VFS: Error connecting to socket. Aborting operation
[    8.630496] CIFS VFS: cifs_mount failed w/return code = -101
[    8.909276] systemd-journald[158]: Received SIGUSR1
[    9.110558] systemd-journald[158]: File /var/log/journal/212c711a2e8942bc9a64d5a2c36a1743/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   10.468154] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X
[   10.468663] <6>[fglrx] Firegl kernel thread PID: 389
[   10.468715] <6>[fglrx] Firegl kernel thread PID: 390
[   10.468767] <6>[fglrx] Firegl kernel thread PID: 391
[   10.468868] <6>[fglrx] IRQ 48 Enabled
[   10.471290] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   10.546781] <6>[fglrx] Gart USWC size:1236 M.
[   10.546785] <6>[fglrx] Gart cacheable size:490 M.
[   10.546790] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   10.546791] <6>[fglrx] Reserved FB block: Unshared offset:f920000, size:3e0000 
[   10.546793] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 
[   16.040570] sky2 0000:03:00.0 enp3s0: enabling interface
[   16.040632] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   19.027042] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   19.066047] sky2 0000:03:00.0 enp3s0: disabling interface
[   19.073265] sky2 0000:03:00.0 enp3s0: enabling interface
[   19.073324] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   19.100634] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[   22.086916] wlp5s0: authenticate with e0:a1:d7:81:74:74
[   22.091218] wlp5s0: send auth to e0:a1:d7:81:74:74 (try 1/3)
[   22.093000] wlp5s0: authenticated
[   22.093342] wlp5s0: associate with e0:a1:d7:81:74:74 (try 1/3)
[   22.101858] wlp5s0: RX AssocResp from e0:a1:d7:81:74:74 (capab=0x411 status=0 aid=1)
[   22.102041] wlp5s0: associated
[   22.102058] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[   47.293925] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[   48.457529] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[   73.331445] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[  503.618422] nr_pdflush_threads exported in /proc is scheduled for removal
[  503.618643] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case.  If you have one, please send an email to linux-mm@kvack.org.
[ 1509.325538] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1509.325587] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1509.325623] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1509.325658] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 1509.325694] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 1509.325730] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 1509.325767] sd 10:0:0:1: Attached scsi generic sg6 type 0
[ 1509.325803] sd 10:0:0:2: Attached scsi generic sg7 type 0
[ 1509.325838] sd 10:0:0:3: Attached scsi generic sg8 type 0
[ 3343.920600] CIFS VFS: server 192.168.1.59 of type Samba 3.2.8 returned unexpected error on SMB posix open, disabling posix open support. Check if server update available.
[ 4610.722391] ata3.00: exception Emask 0x10 SAct 0x3f800 SErr 0x400100 action 0x6 frozen
[ 4610.722395] ata3.00: irq_stat 0x08000000, interface fatal error
[ 4610.722398] ata3: SError: { UnrecovData Handshk }
[ 4610.722401] ata3.00: failed command: WRITE FPDMA QUEUED
[ 4610.722405] ata3.00: cmd 61/00:58:f8:6b:2c/04:00:07:00:00/40 tag 11 ncq 524288 out
         res 40/00:8c:f8:83:2c/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
[ 4610.722407] ata3.00: status: { DRDY }
[ 4610.722409] ata3.00: failed command: WRITE FPDMA QUEUED
[ 4610.722413] ata3.00: cmd 61/00:60:f8:6f:2c/04:00:07:00:00/40 tag 12 ncq 524288 out
         res 40/00:8c:f8:83:2c/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
[ 4610.722415] ata3.00: status: { DRDY }
[ 4610.722417] ata3.00: failed command: WRITE FPDMA QUEUED
[ 4610.722420] ata3.00: cmd 61/00:68:f8:73:2c/04:00:07:00:00/40 tag 13 ncq 524288 out
         res 40/00:8c:f8:83:2c/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
[ 4610.722422] ata3.00: status: { DRDY }
[ 4610.722424] ata3.00: failed command: WRITE FPDMA QUEUED
[ 4610.722427] ata3.00: cmd 61/00:70:f8:77:2c/04:00:07:00:00/40 tag 14 ncq 524288 out
         res 40/00:8c:f8:83:2c/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
[ 4610.722429] ata3.00: status: { DRDY }
[ 4610.722431] ata3.00: failed command: WRITE FPDMA QUEUED
[ 4610.722435] ata3.00: cmd 61/00:78:f8:7b:2c/04:00:07:00:00/40 tag 15 ncq 524288 out
         res 40/00:8c:f8:83:2c/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
[ 4610.722437] ata3.00: status: { DRDY }
[ 4610.722438] ata3.00: failed command: WRITE FPDMA QUEUED
[ 4610.722442] ata3.00: cmd 61/00:80:f8:7f:2c/04:00:07:00:00/40 tag 16 ncq 524288 out
         res 40/00:8c:f8:83:2c/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
[ 4610.722444] ata3.00: status: { DRDY }
[ 4610.722445] ata3.00: failed command: WRITE FPDMA QUEUED
[ 4610.722449] ata3.00: cmd 61/e0:88:f8:83:2c/02:00:07:00:00/40 tag 17 ncq 376832 out
         res 40/00:8c:f8:83:2c/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
[ 4610.722451] ata3.00: status: { DRDY }
[ 4610.722454] ata3: hard resetting link
[ 4611.039560] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4611.041434] ata3.00: configured for UDMA/133
[ 4611.052906] ata3: EH complete
journalctl

Code : Tout sélectionner

Showing user generated messages only. Users in the group 'adm' can see all messages. Pass -q to turn this notice off.
-- Logs begin at mar. 2013-02-05 13:55:37 CET, end at mer. 2013-02-06 19:47:58 C
févr. 05 13:55:37 localhost dhcpcd[610]: dhcpcd will not work correctly unless r
févr. 05 13:55:54 localhost dhcpcd[611]: enp3s0: if_init: Permission denied
févr. 05 13:55:54 localhost dhcpcd[611]: wlp5s0: if_init: Permission denied
févr. 05 13:55:54 localhost dhcpcd[611]: wlp5s0: if_init: Permission denied
févr. 05 13:55:56 localhost dhcpcd[611]: enp3s0: if_init: Permission denied
-- Reboot --
févr. 05 19:09:18 localhost dhcpcd[701]: dhcpcd will not work correctly unless r
févr. 05 19:11:03 localhost dhcpcd[1200]: dhcpcd will not work correctly unless 
févr. 05 19:11:03 localhost dhcpcd[1200]: open `/run/dhcpcd.pid': Permission den
févr. 05 19:11:09 localhost dhcpcd[1201]: enp3s0: if_init: Permission denied
févr. 05 19:11:09 localhost dhcpcd[702]: enp3s0: if_init: Permission denied
févr. 05 19:11:10 localhost dhcpcd[702]: wlp5s0: if_init: Permission denied
févr. 05 19:11:10 localhost dhcpcd[702]: wlp5s0: if_init: Permission denied
févr. 05 19:11:10 localhost dhcpcd[1201]: wlp5s0: if_init: Permission denied
févr. 05 19:11:10 localhost dhcpcd[1201]: wlp5s0: if_init: Permission denied
févr. 05 19:11:12 localhost dhcpcd[1201]: enp3s0: if_init: Permission denied
févr. 05 19:11:12 localhost dhcpcd[702]: enp3s0: if_init: Permission denied
févr. 05 19:31:21 localhost dhcpcd[1201]: received SIGTERM, stopping
-- Reboot --
févr. 05 19:39:22 localhost dhcpcd[1187]: dhcpcd will not work correctly unless 
févr. 05 19:39:28 localhost dhcpcd[1188]: enp3s0: if_init: Permission denied
févr. 05 19:39:28 localhost dhcpcd[1050]: enp3s0: if_init: Permission denied
Haut
Avatar de l’utilisateur
tuxce
Maître du Kyudo
Messages : 6677
Inscription : mer. 12 sept. 2007, 16:03

Re: [crash] Système qui se bloque

Message par tuxce »

Le dmesg après coup ne donne pas vraiment d'info. Par contre, le journalctl doit être lancé en root ou au avec un utilisateur appartenant au adm. Pour ne pas poster un truc énorme, tu peux limiter à quelque minutes avant le kernel panic, par exemple si le kp est arrivé à 10:05 (au pif) :

Code : Tout sélectionner

journalctl --since "10:00"
Haut
Avatar de l’utilisateur
Shingo
archer de cavalerie
Messages : 151
Inscription : dim. 03 févr. 2013, 19:06

Re: [crash] Système qui se bloque

Message par Shingo »

Pour le moment je n'ai pas eu de crash... Donc dès que ça recommence, je viendrais te donner les informations requises.
Haut
Avatar de l’utilisateur
Shingo
archer de cavalerie
Messages : 151
Inscription : dim. 03 févr. 2013, 19:06

Re: [crash] Système qui se bloque

Message par Shingo »

Voilà ce qui c'est passé lors du dernier crash aux alentours de 17h12 :
févr. 08 18:12:58 localhost systemd-journal[167]: Allowing runtime journal files to grow to 197.8M.
févr. 08 18:12:58 localhost kernel: Initializing cgroup subsys cpuset
févr. 08 18:12:58 localhost kernel: Initializing cgroup subsys cpu
févr. 08 18:12:58 localhost kernel: Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMP
févr. 08 18:12:58 localhost kernel: Command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-li
févr. 08 18:12:58 localhost kernel: e820: BIOS-provided physical RAM map:
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
févr. 08 18:12:58 localhost kernel: BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
févr. 08 18:12:58 localhost kernel: NX (Execute Disable) protection: active
févr. 08 18:12:58 localhost kernel: SMBIOS 2.4 present.
févr. 08 18:12:58 localhost kernel: DMI: Gigabyte Technology Co., Ltd. 965P-DS4/965P-DS4, BIOS F12 06/25/2009
févr. 08 18:12:58 localhost kernel: e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
févr. 08 18:12:58 localhost kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
févr. 08 18:12:58 localhost kernel: No AGP bridge found
févr. 08 18:12:58 localhost kernel: e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
févr. 08 18:12:58 localhost kernel: MTRR default type: uncachable
févr. 08 18:12:58 localhost kernel: MTRR fixed ranges enabled:
févr. 08 18:12:58 localhost kernel: 00000-9FFFF write-back
févr. 08 18:12:58 localhost kernel: A0000-BFFFF uncachable
févr. 08 18:12:58 localhost kernel: C0000-CFFFF write-protect
févr. 08 18:12:58 localhost kernel: D0000-EFFFF uncachable
févr. 08 18:12:58 localhost kernel: F0000-FFFFF write-through
févr. 08 18:12:58 localhost kernel: MTRR variable ranges enabled:
févr. 08 18:12:58 localhost kernel: 0 base 000000000 mask F80000000 write-back
févr. 08 18:12:58 localhost kernel: 1 base 080000000 mask FC0000000 write-back
févr. 08 18:12:58 localhost kernel: 2 base 0C0000000 mask FE0000000 write-back
févr. 08 18:12:58 localhost kernel: 3 base 100000000 mask FE0000000 write-back
févr. 08 18:12:58 localhost kernel: 4 base 0DFF00000 mask FFFF00000 write-through
févr. 08 18:12:58 localhost kernel: 5 disabled
févr. 08 18:12:58 localhost kernel: 6 disabled
févr. 08 18:12:58 localhost kernel: 7 disabled
févr. 08 18:12:58 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
févr. 08 18:12:58 localhost kernel: e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
févr. 08 18:12:58 localhost kernel: found SMP MP-table at [mem 0x000f5590-0x000f559f] mapped at [ffff8800000f5590]
févr. 08 18:12:58 localhost kernel: initial memory mapped: [mem 0x00000000-0x1fffffff]
févr. 08 18:12:58 localhost kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
févr. 08 18:12:58 localhost kernel: init_memory_mapping: [mem 0x00000000-0xdfedffff]
févr. 08 18:12:58 localhost kernel: [mem 0x00000000-0xdfdfffff] page 2M
févr. 08 18:12:58 localhost kernel: [mem 0xdfe00000-0xdfedffff] page 4k
févr. 08 18:12:58 localhost kernel: kernel direct mapping tables up to 0xdfedffff @ [mem 0x1fffa000-0x1fffffff]
févr. 08 18:12:58 localhost kernel: init_memory_mapping: [mem 0x100000000-0x11fffffff]
Haut
Avatar de l’utilisateur
benjarobin
Maître du Kyudo
Messages : 17647
Inscription : sam. 30 mai 2009, 15:48
Localisation : Lyon

Re: [crash] Système qui se bloque

Message par benjarobin »

Tu vient nous donner les log de ton début de boot... Sinon je crains que la trace ne soit pas écrite dans les log, elles sont rarement écrite dans le cas d'un kernel panic
Zsh | KDE | PC fixe : AMD Ryzen 9900X, Radeon RX 7700 XT
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Haut
Avatar de l’utilisateur
Shingo
archer de cavalerie
Messages : 151
Inscription : dim. 03 févr. 2013, 19:06

Re: [crash] Système qui se bloque

Message par Shingo »

J'ai trouvé la trace du problème, j'ai cette erreur qui revient sans cesse suivi d'un reboot :
févr. 19 10:21:25 localhost dhcpcd[344]: dhcpcd not running
févr. 19 10:21:25 localhost dhcpcd[350]: dhcpcd not running
févr. 19 10:21:25 localhost dhcpcd[358]: dhcpcd not running
févr. 19 10:21:28 localhost dhcpcd[371]: wlp5s0: sendmsg: Cannot assign requeste
févr. 19 10:24:33 localhost kernel: ata3.00: exception Emask 0x10 SAct 0x1fc0 SE
févr. 19 10:24:33 localhost kernel: ata3.00: irq_stat 0x08000000, interface fata
févr. 19 10:24:33 localhost kernel: ata3: SError: { UnrecovData LinkSeq }
févr. 19 10:24:33 localhost kernel: ata3.00: failed command: WRITE FPDMA QUEUED
févr. 19 10:24:33 localhost kernel: [145B blob data]
févr. 19 10:24:33 localhost kernel: ata3.00: status: { DRDY }
févr. 19 10:24:33 localhost kernel: ata3.00: failed command: WRITE FPDMA QUEUED
févr. 19 10:24:33 localhost kernel: [145B blob data]
févr. 19 10:24:33 localhost kernel: ata3.00: status: { DRDY }
févr. 19 10:24:33 localhost kernel: ata3.00: failed command: WRITE FPDMA QUEUED
févr. 19 10:24:33 localhost kernel: [145B blob data]
févr. 19 10:24:33 localhost kernel: ata3.00: status: { DRDY }
févr. 19 10:24:33 localhost kernel: ata3.00: failed command: WRITE FPDMA QUEUED
févr. 19 10:24:33 localhost kernel: [145B blob data]
févr. 19 10:24:33 localhost kernel: ata3.00: status: { DRDY }
févr. 19 10:24:33 localhost kernel: ata3.00: failed command: WRITE FPDMA QUEUED
févr. 19 10:24:33 localhost kernel: [146B blob data]
févr. 19 10:24:33 localhost kernel: ata3.00: status: { DRDY }
:
févr. 19 09:49:24 localhost kernel: [146B blob data]
févr. 19 09:49:24 localhost kernel: ata3.00: status: { DRDY }
févr. 19 09:49:24 localhost kernel: ata3.00: failed command: WRITE FPDMA QUEUED
févr. 19 09:49:24 localhost kernel: [146B blob data]
févr. 19 09:49:24 localhost kernel: ata3.00: status: { DRDY }
févr. 19 09:55:52 localhost systemd-tmpfiles[1698]: stat(/run/user/1000/gvfs) fa
févr. 19 10:20:38 localhost kernel: watchdog watchdog0: watchdog did not stop!
Impossible de travailler sur le pc, ça reboot aléatoirement...

Edit : d'après ce que j'ai pu voir sur Internet, se serait un câble défectueux... je vais vérifier...

Edit : Le problème semble provenir de l'AHCI, car une fois désactivé dans le bios, il n'y a aucun problème. Le système est stable. J'ai ajouté le module ahci dans mon mkinitcpio.conf mais cela n'a rien changé, ça reboot malproprement sur moi (...).
Haut
Avatar de l’utilisateur
Shingo
archer de cavalerie
Messages : 151
Inscription : dim. 03 févr. 2013, 19:06

Re: [crash] Système qui se bloque

Message par Shingo »

Je viens apporter une réponse / solution à mon problème. Cela pourra être utile aux gens qui sont dans mon cas et qui pourront se sentir fruster de voir leur machine rebooter sans cesse. Comme je l'ai sous-entendu, il y a un problème avec le kernel 3.7.9 livré avec ArchLinux. Même en activant le module achi, la machine est instable et reboot aléatoirement. Bref, vous avez deux solutions :

- compiler le kernel 3.8 comme un grand
- installer / compiler le kernel 3.8 via le yaourt -S linux-mainline
- installer le kernel 3.8 via le repot testing

De plus, le kernel 3.8 apporte une meilleure performance :)
Haut
Répondre

Revenir à « Installation et configuration »