[Slim] Impossible de lancer i3 (résolu)

[Spheerys]

Bonsoir,

J'ai fait quelques modifs diverses et variés au niveau de X11 pour une sombre histoire de polices mal lissées (et j'ai résolu mon soucis!), quand soudain, Slim a décidé qu'il ne voulait plus lancer i3 !
XFCE4 se lance bien lui.
J'ai cherché dans les logs de xorg, de slim... rien de significatif (pour moi).

Un peu bloqué, j'ai installé vite fait GDM et là, ma session i3 refonctionne !

Mais je suis un peu dépité de devoir passer par GDM...

Voici mon log slim :

Code : Tout sélectionner

slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.
.
Giving up.
slim: unable to connect to X server


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: unexpected signal 15


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.



slim: waiting for X server to begin accepting connections.



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections
Giving up.
slim: unable to connect to X server


slim: waiting for X server to begin accepting connections
Giving up.
slim: unable to connect to X server


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15
slim: connection to X server lost.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down.



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: unexpected signal slim1: unexpected signal 1

slim: connection to X server lost.
slim: connection to X server lost.


slim: waiting for X server to begin accepting connections
Giving up.
slim: unable to connect to X server


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.


slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: unexpected signal 2


slim: unexpected signal 2



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.
slim: unexpected signal 2

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

slim: waiting for X server to shut down



slim: waiting for X server to begin accepting connections.

Si vous avez des pistes...

[FoolEcho]

Salut,

Tu peux vérifier si i3 démarre par startx seul.
Sinon, il faut voir comment tu le démarres par slim (donc contenu du slim.conf + ~/.xinitrc).

[Spheerys]

Effectivement je n'avais pas essayé de lancer startx seul.

Ca ne marche tjrs pas et voilà le résultat du log Xorg :

Code : Tout sélectionner

[  4706.293] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[  4706.294] X Protocol Version 11, Revision 0
[  4706.295] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[  4706.295] Current Operating System: Linux narayan 3.10.9-1-ARCH #1 SMP PREEMPT Wed Aug 21 13:49:35 CEST 2013 x86_64
[  4706.295] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw resume=/dev/sdb6 init=/usr/lib/systemd/systemd
[  4706.296] Build Date: 01 July 2013  10:48:42AM
[  4706.297]  
[  4706.298] Current version of pixman: 0.30.2
[  4706.299] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  4706.299] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4706.302] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 26 09:32:25 2013
[  4706.303] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  4706.304] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4706.304] (==) No Layout section.  Using the first Screen section.
[  4706.304] (==) No screen section available. Using defaults.
[  4706.304] (**) |-->Screen "Default Screen Section" (0)
[  4706.304] (**) |   |-->Monitor "<default monitor>"
[  4706.304] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  4706.304] (==) Automatically adding devices
[  4706.304] (==) Automatically enabling devices
[  4706.304] (==) Automatically adding GPU devices
[  4706.304] (WW) The directory "/usr/share/fonts/truetype" does not exist.
[  4706.304] 	Entry deleted from font path.
[  4706.304] (**) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/cantarell,
	/usr/share/fonts/cyrillic,
	/usr/share/fonts/encodings,
	/usr/share/fonts/local,
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/util,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  4706.304] (==) ModulePath set to "/usr/lib/xorg/modules"
[  4706.304] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4706.304] (II) Loader magic: 0x7fdc20
[  4706.304] (II) Module ABI versions:
[  4706.304] 	X.Org ANSI C Emulation: 0.4
[  4706.304] 	X.Org Video Driver: 14.1
[  4706.304] 	X.Org XInput driver : 19.1
[  4706.304] 	X.Org Server Extension : 7.0
[  4706.304] (II) xfree86: Adding drm device (/dev/dri/card0)
[  4706.305] (--) PCI:*(0:1:0:0) 1002:68f9:174b:e233 rev 0, Mem @ 0xe0000000/268435456, 0xf7e20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[  4706.306] Initializing built-in extension Generic Event Extension
[  4706.307] Initializing built-in extension SHAPE
[  4706.308] Initializing built-in extension MIT-SHM
[  4706.309] Initializing built-in extension XInputExtension
[  4706.309] Initializing built-in extension XTEST
[  4706.310] Initializing built-in extension BIG-REQUESTS
[  4706.311] Initializing built-in extension SYNC
[  4706.312] Initializing built-in extension XKEYBOARD
[  4706.313] Initializing built-in extension XC-MISC
[  4706.314] Initializing built-in extension SECURITY
[  4706.314] Initializing built-in extension XINERAMA
[  4706.315] Initializing built-in extension XFIXES
[  4706.316] Initializing built-in extension RENDER
[  4706.317] Initializing built-in extension RANDR
[  4706.318] Initializing built-in extension COMPOSITE
[  4706.318] Initializing built-in extension DAMAGE
[  4706.319] Initializing built-in extension MIT-SCREEN-SAVER
[  4706.320] Initializing built-in extension DOUBLE-BUFFER
[  4706.321] Initializing built-in extension RECORD
[  4706.322] Initializing built-in extension DPMS
[  4706.322] Initializing built-in extension X-Resource
[  4706.323] Initializing built-in extension XVideo
[  4706.324] Initializing built-in extension XVideo-MotionCompensation
[  4706.325] Initializing built-in extension XFree86-VidModeExtension
[  4706.326] Initializing built-in extension XFree86-DGA
[  4706.327] Initializing built-in extension XFree86-DRI
[  4706.328] Initializing built-in extension DRI2
[  4706.328] (II) "glx" will be loaded by default.
[  4706.328] (II) LoadModule: "dri2"
[  4706.328] (II) Module "dri2" already built-in
[  4706.328] (II) LoadModule: "glamoregl"
[  4706.328] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  4706.329] (II) Module glamoregl: vendor="X.Org Foundation"
[  4706.329] 	compiled for 1.14.0, module version = 0.5.0
[  4706.329] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4706.329] (II) LoadModule: "glx"
[  4706.329] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  4706.329] (II) Module glx: vendor="X.Org Foundation"
[  4706.329] 	compiled for 1.14.2, module version = 1.0.0
[  4706.329] 	ABI class: X.Org Server Extension, version 7.0
[  4706.329] (==) AIGLX enabled
[  4706.330] Loading extension GLX
[  4706.330] (==) Matched ati as autoconfigured driver 0
[  4706.330] (==) Matched ati as autoconfigured driver 1
[  4706.330] (==) Matched vesa as autoconfigured driver 2
[  4706.330] (==) Matched modesetting as autoconfigured driver 3
[  4706.330] (==) Matched fbdev as autoconfigured driver 4
[  4706.330] (==) Assigned the driver to the xf86ConfigLayout
[  4706.330] (II) LoadModule: "ati"
[  4706.330] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[  4706.330] (II) Module ati: vendor="X.Org Foundation"
[  4706.330] 	compiled for 1.14.2, module version = 7.2.0
[  4706.330] 	Module class: X.Org Video Driver
[  4706.330] 	ABI class: X.Org Video Driver, version 14.1
[  4706.330] (II) LoadModule: "radeon"
[  4706.330] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[  4706.331] (II) Module radeon: vendor="X.Org Foundation"
[  4706.331] 	compiled for 1.14.2, module version = 7.2.0
[  4706.331] 	Module class: X.Org Video Driver
[  4706.331] 	ABI class: X.Org Video Driver, version 14.1
[  4706.331] (II) LoadModule: "vesa"
[  4706.331] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  4706.331] (II) Module vesa: vendor="X.Org Foundation"
[  4706.331] 	compiled for 1.14.0, module version = 2.3.2
[  4706.331] 	Module class: X.Org Video Driver
[  4706.331] 	ABI class: X.Org Video Driver, version 14.1
[  4706.331] (II) LoadModule: "modesetting"
[  4706.331] (WW) Warning, couldn't open module modesetting
[  4706.331] (II) UnloadModule: "modesetting"
[  4706.331] (II) Unloading modesetting
[  4706.331] (EE) Failed to load module "modesetting" (module does not exist, 0)
[  4706.331] (II) LoadModule: "fbdev"
[  4706.331] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  4706.331] (II) Module fbdev: vendor="X.Org Foundation"
[  4706.331] 	compiled for 1.14.0, module version = 0.4.3
[  4706.331] 	Module class: X.Org Video Driver
[  4706.331] 	ABI class: X.Org Video Driver, version 14.1
[  4706.331] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
	OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
	HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
	BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
	KABINI, KABINI, KABINI
[  4706.336] (II) VESA: driver for VESA chipsets: vesa
[  4706.336] (II) FBDEV: driver for framebuffer: fbdev
[  4706.336] (++) using VT number 2

[  4706.336] (II) [KMS] Kernel modesetting enabled.
[  4706.336] (WW) Falling back to old probe method for vesa
[  4706.336] (WW) Falling back to old probe method for fbdev
[  4706.336] (II) Loading sub module "fbdevhw"
[  4706.336] (II) LoadModule: "fbdevhw"
[  4706.336] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  4706.336] (II) Module fbdevhw: vendor="X.Org Foundation"
[  4706.336] 	compiled for 1.14.2, module version = 0.0.2
[  4706.336] 	ABI class: X.Org Video Driver, version 14.1
[  4706.336] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  4706.336] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[  4706.336] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  4706.336] (==) RADEON(0): Default visual is TrueColor
[  4706.336] (==) RADEON(0): RGB weight 888
[  4706.336] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[  4706.336] (--) RADEON(0): Chipset: "ATI Radeon HD 5450" (ChipID = 0x68f9)
[  4706.336] (II) Loading sub module "dri2"
[  4706.336] (II) LoadModule: "dri2"
[  4706.336] (II) Module "dri2" already built-in
[  4706.336] (II) Loading sub module "exa"
[  4706.336] (II) LoadModule: "exa"
[  4706.337] (II) Loading /usr/lib/xorg/modules/libexa.so
[  4706.337] (II) Module exa: vendor="X.Org Foundation"
[  4706.337] 	compiled for 1.14.2, module version = 2.6.0
[  4706.337] 	ABI class: X.Org Video Driver, version 14.1
[  4706.337] (II) RADEON(0): KMS Color Tiling: enabled
[  4706.337] (II) RADEON(0): KMS Color Tiling 2D: enabled
[  4706.337] (II) RADEON(0): KMS Pageflipping: enabled
[  4706.337] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[  4706.339] (II) RADEON(0): Output HDMI-0 has no monitor section
[  4706.369] (II) RADEON(0): Output DVI-0 has no monitor section
[  4706.389] (II) RADEON(0): Output VGA-0 has no monitor section
[  4706.391] (II) RADEON(0): EDID for output HDMI-0
[  4706.421] (II) RADEON(0): EDID for output DVI-0
[  4706.421] (II) RADEON(0): Manufacturer: ACI  Model: 27a3  Serial#: 116278
[  4706.421] (II) RADEON(0): Year: 2012  Week: 42
[  4706.421] (II) RADEON(0): EDID Version: 1.3
[  4706.421] (II) RADEON(0): Digital Display Input
[  4706.422] (II) RADEON(0): DFP 1.x compatible TMDS
[  4706.422] (II) RADEON(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[  4706.422] (II) RADEON(0): Gamma: 2.20
[  4706.422] (II) RADEON(0): DPMS capabilities: Off
[  4706.422] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  4706.422] (II) RADEON(0): First detailed timing is preferred mode
[  4706.422] (II) RADEON(0): redX: 0.666 redY: 0.330   greenX: 0.310 greenY: 0.630
[  4706.422] (II) RADEON(0): blueX: 0.150 blueY: 0.040   whiteX: 0.313 whiteY: 0.329
[  4706.422] (II) RADEON(0): Supported established timings:
[  4706.422] (II) RADEON(0): 720x400@70Hz
[  4706.422] (II) RADEON(0): 640x480@60Hz
[  4706.422] (II) RADEON(0): 640x480@67Hz
[  4706.422] (II) RADEON(0): 640x480@75Hz
[  4706.422] (II) RADEON(0): 800x600@56Hz
[  4706.422] (II) RADEON(0): 800x600@60Hz
[  4706.422] (II) RADEON(0): 800x600@72Hz
[  4706.422] (II) RADEON(0): 800x600@75Hz
[  4706.422] (II) RADEON(0): 832x624@75Hz
[  4706.422] (II) RADEON(0): 1024x768@60Hz
[  4706.422] (II) RADEON(0): 1024x768@70Hz
[  4706.422] (II) RADEON(0): 1024x768@75Hz
[  4706.422] (II) RADEON(0): 1280x1024@75Hz
[  4706.422] (II) RADEON(0): Manufacturer's mask: 0
[  4706.422] (II) RADEON(0): Supported standard timings:
[  4706.422] (II) RADEON(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[  4706.422] (II) RADEON(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  4706.422] (II) RADEON(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  4706.422] (II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  4706.422] (II) RADEON(0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[  4706.422] (II) RADEON(0): #5: hsize: 1280  vsize 800  refresh: 60  vid: 129
[  4706.422] (II) RADEON(0): #6: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[  4706.422] (II) RADEON(0): #7: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[  4706.422] (II) RADEON(0): Supported detailed timing:
[  4706.422] (II) RADEON(0): clock: 241.5 MHz   Image Size:  597 x 336 mm
[  4706.422] (II) RADEON(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[  4706.422] (II) RADEON(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[  4706.422] (II) RADEON(0): Serial No: CALMTF116278
[  4706.422] (II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 24 H max: 99 kHz, PixClock max 335 MHz
[  4706.422] (II) RADEON(0): Monitor name: ASUS PB278
[  4706.422] (II) RADEON(0): EDID (in hex):
[  4706.422] (II) RADEON(0): 	00ffffffffffff000469a32736c60100
[  4706.422] (II) RADEON(0): 	2a160103813c22782aa595aa544fa126
[  4706.422] (II) RADEON(0): 	0a5054b7ef00d1c0b300950081808140
[  4706.422] (II) RADEON(0): 	810081c0714f565e00a0a0a029503020
[  4706.422] (II) RADEON(0): 	350055502100001a000000ff0043414c
[  4706.422] (II) RADEON(0): 	4d54463131363237380a000000fd0032
[  4706.422] (II) RADEON(0): 	4b186321000a202020202020000000fc
[  4706.422] (II) RADEON(0): 	00415355532050423237380a2020002e
[  4706.422] (II) RADEON(0): Printing probed modes for output DVI-0
[  4706.422] (II) RADEON(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[  4706.422] (II) RADEON(0): Modeline "1920x1080"x60.0  172.78  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[  4706.422] (II) RADEON(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[  4706.422] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  4706.422] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  4706.422] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  4706.422] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  4706.422] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  4706.422] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  4706.422] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  4706.422] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  4706.422] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  4706.422] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  4706.422] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  4706.443] (II) RADEON(0): EDID for output VGA-0
[  4706.443] (II) RADEON(0): Output HDMI-0 disconnected
[  4706.443] (II) RADEON(0): Output DVI-0 connected
[  4706.443] (II) RADEON(0): Output VGA-0 disconnected
[  4706.443] (II) RADEON(0): Using exact sizes for initial modes
[  4706.443] (II) RADEON(0): Output DVI-0 using initial mode 2560x1440
[  4706.443] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  4706.443] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:20000000 visible:1f1b0000
[  4706.443] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[  4706.443] (==) RADEON(0): DPI set to (96, 96)
[  4706.443] (II) Loading sub module "fb"
[  4706.443] (II) LoadModule: "fb"
[  4706.443] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4706.443] (II) Module fb: vendor="X.Org Foundation"
[  4706.443] 	compiled for 1.14.2, module version = 1.0.0
[  4706.443] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4706.443] (II) Loading sub module "ramdac"
[  4706.443] (II) LoadModule: "ramdac"
[  4706.443] (II) Module "ramdac" already built-in
[  4706.443] (II) UnloadModule: "vesa"
[  4706.443] (II) Unloading vesa
[  4706.443] (II) UnloadModule: "fbdev"
[  4706.443] (II) Unloading fbdev
[  4706.443] (II) UnloadSubModule: "fbdevhw"
[  4706.443] (II) Unloading fbdevhw
[  4706.443] (--) Depth 24 pixmap format is 32 bpp
[  4706.443] (II) RADEON(0): [DRI2] Setup complete
[  4706.443] (II) RADEON(0): [DRI2]   DRI driver: r600
[  4706.443] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[  4706.443] (II) RADEON(0): Front buffer size: 14720K
[  4706.443] (II) RADEON(0): VRAM usage limit set to 445363K
[  4706.443] (==) RADEON(0): Backing store disabled
[  4706.443] (II) RADEON(0): Direct rendering enabled
[  4706.443] (II) EXA(0): Driver allocated offscreen pixmaps
[  4706.443] (II) EXA(0): Driver registered support for the following operations:
[  4706.443] (II)         Solid
[  4706.443] (II)         Copy
[  4706.443] (II)         Composite (RENDER acceleration)
[  4706.443] (II)         UploadToScreen
[  4706.443] (II)         DownloadFromScreen
[  4706.443] (II) RADEON(0): Acceleration enabled
[  4706.443] (==) RADEON(0): DPMS enabled
[  4706.443] (==) RADEON(0): Silken mouse enabled
[  4706.443] (II) RADEON(0): Set up textured video
[  4706.443] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[  4706.443] (II) RADEON(0): [XvMC] Extension initialized.
[  4706.443] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4706.444] (--) RandR disabled
[  4706.456] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  4706.456] (II) AIGLX: enabled GLX_INTEL_swap_event
[  4706.456] (II) AIGLX: enabled GLX_ARB_create_context
[  4706.456] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  4706.456] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[  4706.456] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  4706.456] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  4706.456] (II) AIGLX: Loaded and initialized r600
[  4706.456] (II) GLX: Initialized DRI2 GL provider for screen 0
[  4706.457] (II) RADEON(0): Setting screen physical size to 677 x 381
[  4706.544] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  4706.544] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4706.544] (II) LoadModule: "evdev"
[  4706.545] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4706.545] (II) Module evdev: vendor="X.Org Foundation"
[  4706.545] 	compiled for 1.14.2, module version = 2.8.1
[  4706.545] 	Module class: X.Org XInput Driver
[  4706.545] 	ABI class: X.Org XInput driver, version 19.1
[  4706.545] (II) Using input driver 'evdev' for 'Power Button'
[  4706.545] (**) Power Button: always reports core events
[  4706.545] (**) evdev: Power Button: Device: "/dev/input/event1"
[  4706.545] (--) evdev: Power Button: Vendor 0 Product 0x1
[  4706.545] (--) evdev: Power Button: Found keys
[  4706.545] (II) evdev: Power Button: Configuring as keyboard
[  4706.545] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  4706.545] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  4706.545] (**) Option "xkb_rules" "evdev"
[  4706.545] (**) Option "xkb_model" "pc105"
[  4706.545] (**) Option "xkb_layout" "fr"
[  4706.545] (**) Option "xkb_variant" "latin9"
[  4706.560] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  4706.560] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4706.560] (II) Using input driver 'evdev' for 'Power Button'
[  4706.560] (**) Power Button: always reports core events
[  4706.560] (**) evdev: Power Button: Device: "/dev/input/event0"
[  4706.560] (--) evdev: Power Button: Vendor 0 Product 0x1
[  4706.560] (--) evdev: Power Button: Found keys
[  4706.560] (II) evdev: Power Button: Configuring as keyboard
[  4706.560] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[  4706.560] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  4706.560] (**) Option "xkb_rules" "evdev"
[  4706.560] (**) Option "xkb_model" "pc105"
[  4706.560] (**) Option "xkb_layout" "fr"
[  4706.560] (**) Option "xkb_variant" "latin9"
[  4706.560] (II) config/udev: Adding drm device (/dev/dri/card0)
[  4706.560] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[  4706.560] (II) No input driver specified, ignoring this device.
[  4706.560] (II) This device may have been added with another device file.
[  4706.561] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event17)
[  4706.561] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[  4706.561] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[  4706.561] (**) UVC Camera (046d:0825): always reports core events
[  4706.561] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event17"
[  4706.561] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[  4706.561] (--) evdev: UVC Camera (046d:0825): Found keys
[  4706.561] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[  4706.561] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input17/event17"
[  4706.561] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
[  4706.561] (**) Option "xkb_rules" "evdev"
[  4706.561] (**) Option "xkb_model" "pc105"
[  4706.561] (**) Option "xkb_layout" "fr"
[  4706.561] (**) Option "xkb_variant" "latin9"
[  4706.561] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event2)
[  4706.561] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  4706.561] (**) TypeMatrix.com USB Keyboard: Applying InputClass "Typematrix Bepo"
[  4706.561] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard'
[  4706.561] (**) TypeMatrix.com USB Keyboard: always reports core events
[  4706.561] (**) evdev: TypeMatrix.com USB Keyboard: Device: "/dev/input/event2"
[  4706.561] (--) evdev: TypeMatrix.com USB Keyboard: Vendor 0x1e54 Product 0x2030
[  4706.561] (--) evdev: TypeMatrix.com USB Keyboard: Found keys
[  4706.561] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as keyboard
[  4706.561] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input2/event2"
[  4706.561] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 9)
[  4706.561] (**) Option "xkb_rules" "evdev"
[  4706.561] (**) Option "xkb_model" "pc105"
[  4706.561] (**) Option "xkb_layout" "fr"
[  4706.561] (**) Option "xkb_variant" "bepo_w"
[  4706.576] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event3)
[  4706.576] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  4706.576] (**) TypeMatrix.com USB Keyboard: Applying InputClass "Typematrix Bepo"
[  4706.576] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard'
[  4706.576] (**) TypeMatrix.com USB Keyboard: always reports core events
[  4706.576] (**) evdev: TypeMatrix.com USB Keyboard: Device: "/dev/input/event3"
[  4706.576] (--) evdev: TypeMatrix.com USB Keyboard: Vendor 0x1e54 Product 0x2030
[  4706.576] (--) evdev: TypeMatrix.com USB Keyboard: Found 1 mouse buttons
[  4706.576] (--) evdev: TypeMatrix.com USB Keyboard: Found scroll wheel(s)
[  4706.576] (--) evdev: TypeMatrix.com USB Keyboard: Found relative axes
[  4706.576] (II) evdev: TypeMatrix.com USB Keyboard: Forcing relative x/y axes to exist.
[  4706.576] (--) evdev: TypeMatrix.com USB Keyboard: Found absolute axes
[  4706.576] (II) evdev: TypeMatrix.com USB Keyboard: Forcing absolute x/y axes to exist.
[  4706.576] (--) evdev: TypeMatrix.com USB Keyboard: Found keys
[  4706.576] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as mouse
[  4706.576] (II) evdev: TypeMatrix.com USB Keyboard: Configuring as keyboard
[  4706.576] (II) evdev: TypeMatrix.com USB Keyboard: Adding scrollwheel support
[  4706.576] (**) evdev: TypeMatrix.com USB Keyboard: YAxisMapping: buttons 4 and 5
[  4706.576] (**) evdev: TypeMatrix.com USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4706.576] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/input/input3/event3"
[  4706.576] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 10)
[  4706.576] (**) Option "xkb_rules" "evdev"
[  4706.576] (**) Option "xkb_model" "pc105"
[  4706.576] (**) Option "xkb_layout" "fr"
[  4706.576] (**) Option "xkb_variant" "bepo_w"
[  4706.576] (II) evdev: TypeMatrix.com USB Keyboard: initialized for relative axes.
[  4706.576] (WW) evdev: TypeMatrix.com USB Keyboard: ignoring absolute axes.
[  4706.577] (**) TypeMatrix.com USB Keyboard: (accel) keeping acceleration scheme 1
[  4706.577] (**) TypeMatrix.com USB Keyboard: (accel) acceleration profile 0
[  4706.577] (**) TypeMatrix.com USB Keyboard: (accel) acceleration factor: 2.000
[  4706.577] (**) TypeMatrix.com USB Keyboard: (accel) acceleration threshold: 4
[  4706.577] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event14)
[  4706.577] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  4706.577] (II) Using input driver 'evdev' for 'Chicony USB Keyboard'
[  4706.577] (**) Chicony USB Keyboard: always reports core events
[  4706.577] (**) evdev: Chicony USB Keyboard: Device: "/dev/input/event14"
[  4706.577] (--) evdev: Chicony USB Keyboard: Vendor 0x4f2 Product 0x402
[  4706.577] (--) evdev: Chicony USB Keyboard: Found keys
[  4706.577] (II) evdev: Chicony USB Keyboard: Configuring as keyboard
[  4706.577] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input14/event14"
[  4706.577] (II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD, id 11)
[  4706.577] (**) Option "xkb_rules" "evdev"
[  4706.577] (**) Option "xkb_model" "pc105"
[  4706.577] (**) Option "xkb_layout" "fr"
[  4706.577] (**) Option "xkb_variant" "latin9"
[  4706.591] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event15)
[  4706.591] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  4706.591] (II) Using input driver 'evdev' for 'Chicony USB Keyboard'
[  4706.591] (**) Chicony USB Keyboard: always reports core events
[  4706.591] (**) evdev: Chicony USB Keyboard: Device: "/dev/input/event15"
[  4706.591] (--) evdev: Chicony USB Keyboard: Vendor 0x4f2 Product 0x402
[  4706.591] (--) evdev: Chicony USB Keyboard: Found keys
[  4706.591] (II) evdev: Chicony USB Keyboard: Configuring as keyboard
[  4706.592] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.1/input/input15/event15"
[  4706.592] (II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD, id 12)
[  4706.592] (**) Option "xkb_rules" "evdev"
[  4706.592] (**) Option "xkb_model" "pc105"
[  4706.592] (**) Option "xkb_layout" "fr"
[  4706.592] (**) Option "xkb_variant" "latin9"
[  4706.592] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
[  4706.592] (II) No input driver specified, ignoring this device.
[  4706.592] (II) This device may have been added with another device file.
[  4706.592] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[  4706.592] (II) No input driver specified, ignoring this device.
[  4706.592] (II) This device may have been added with another device file.
[  4706.592] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[  4706.592] (II) No input driver specified, ignoring this device.
[  4706.592] (II) This device may have been added with another device file.
[  4706.592] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[  4706.592] (II) No input driver specified, ignoring this device.
[  4706.592] (II) This device may have been added with another device file.
[  4706.592] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
[  4706.592] (II) No input driver specified, ignoring this device.
[  4706.592] (II) This device may have been added with another device file.
[  4706.592] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event7)
[  4706.592] (II) No input driver specified, ignoring this device.
[  4706.592] (II) This device may have been added with another device file.
[  4706.593] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event8)
[  4706.593] (II) No input driver specified, ignoring this device.
[  4706.593] (II) This device may have been added with another device file.
[  4706.593] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[  4706.593] (II) No input driver specified, ignoring this device.
[  4706.593] (II) This device may have been added with another device file.
[  4706.593] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event16)
[  4706.593] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[  4706.593] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[  4706.593] (**) Logitech USB Laser Mouse: always reports core events
[  4706.593] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event16"
[  4706.593] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc069
[  4706.593] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[  4706.593] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[  4706.593] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[  4706.593] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[  4706.593] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[  4706.593] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[  4706.593] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[  4706.593] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4706.593] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input16/event16"
[  4706.593] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 13)
[  4706.593] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[  4706.593] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[  4706.593] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[  4706.593] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[  4706.593] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[  4706.593] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[  4706.593] (II) No input driver specified, ignoring this device.
[  4706.593] (II) This device may have been added with another device file.
[  4706.593] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  4706.593] (II) No input driver specified, ignoring this device.
[  4706.593] (II) This device may have been added with another device file.
[  4706.940] (II) evdev: Logitech USB Laser Mouse: Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.940] (II) evdev: Chicony USB Keyboard: Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.940] (II) evdev: Chicony USB Keyboard: Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.940] (II) evdev: TypeMatrix.com USB Keyboard: Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.940] (II) evdev: TypeMatrix.com USB Keyboard: Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.940] (II) evdev: UVC Camera (046d:0825): Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.940] (II) evdev: Power Button: Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.940] (II) evdev: Power Button: Close
[  4706.940] (II) UnloadModule: "evdev"
[  4706.958] (EE) Server terminated successfully (0). Closing log file.

Voici mon fichier .xinitrc :

Code : Tout sélectionner

#!/bin/sh

#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
#

#DEFAULT_SESSION=i3
case $1 in
  i3)      exec i3;;
  gnome)   exec gnome-session;;
  kde)     exec startkde;;
  xfce4)   exec startxfce4;;
  openbox) exec openbox-session;;
  openbox2) exec ck-launch-session dbus-launch openbox-session;;
  i3|*)     exec i3;;
esac

# Fonts
xset +fp /usr/share/fonts/local/
xset fp rehash

# GPG Agent
eval $(gpg-agent --daemon) &

gnome-keyring-daemon

Mon fichier slim.conf :

Code : Tout sélectionner

# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path        /bin:/usr/bin:/usr/local/bin
default_xserver     /usr/bin/X
xserver_arguments -nolisten tcp vt07

# Commands for halt, login, etc.
halt_cmd            /sbin/shutdown -h now
reboot_cmd          /sbin/shutdown -r now
console_cmd         /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd        /usr/sbin/suspend

# Full path to the xauth binary
xauth_path         /usr/bin/xauth

# Xauth file for server
authfile           /var/run/slim.auth


# Activate numlock when slim starts. Valid values: on|off
# numlock             on

# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor          false

# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
#
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd           exec /bin/sh - ~/.xinitrc %session
login_cmd           exec /bin/bash -login ~/.xinitrc %session

# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
#
# sessionstart_cmd      some command
# sessionstop_cmd       some command

# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon        yes

# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions            i3,xfce4,icewm-session,wmaker,blackbox

# Executed when pressing F11 (requires imagemagick)
screenshot_cmd      import -window root /slim.png

# welcome message. Available variables: %host, %domain
welcome_msg         Welcome to %host

# Session message. Prepended to the session name when pressing F1
# session_msg         Session:

# shutdown / reboot messages
shutdown_msg       The system is halting...
reboot_msg         The system is rebooting...

# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user        hedy

# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password      no

# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login          yes


# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme       default

# Lock file
lockfile            /var/lock/slim.lock

# Log file
logfile             /var/log/slim.log

Alors pour info, avant le problème, je suivais la doc https://wiki.archlinux.org/index.php/Font_Configuration pour régler un soucis de polices moches dans mes navigateurs.
J'ai fais plusieurs modifs dans les fichiers /etc/X11/xorg.conf.d dont voici le contenu actuel :
/etc/X11/xorg.conf.d/10-evdev.conf

Code : Tout sélectionner

                  
#
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "fr"
        Option "XkbVariant" "latin9"
EndSection

#Section "ServerFlags"
#       Option "EXAPixmaps" "off"
#       Option "AutoAddDevices" "false"
#EndSection

/etc/X11/xorg.conf.d/20-fonts.conf

Code : Tout sélectionner

# Let X.Org know about the custom font directories
Section "Files"
    FontPath    "/usr/share/fonts/100dpi"
    FontPath    "/usr/share/fonts/75dpi"
    FontPath    "/usr/share/fonts/cantarell"
    FontPath    "/usr/share/fonts/cyrillic"
    FontPath    "/usr/share/fonts/encodings"
    FontPath    "/usr/share/fonts/local"
    FontPath    "/usr/share/fonts/misc"
    FontPath    "/usr/share/fonts/truetype"
    FontPath    "/usr/share/fonts/TTF"
    FontPath    "/usr/share/fonts/util"
EndSection

/etc/X11/xorg.conf.d/30-keyboard.conf

Code : Tout sélectionner

Section "InputClass"
        Identifier              "Typematrix Bepo"
        MatchIsKeyboard         "on"
        MatchVendor             "TypeMatrix.com"
        MatchProduct            "USB Keyboard"

        Option "XkbRules"       "evdev"
        Option "XkbModel"       "pc105"
        Option "XkbLayout"      "fr"
        Option "XkbVariant"     "bepo_w"
#        Option "XkbOptions"            "compose:lalt,grp:shifts_toggle,grp_led:scroll"
EndSection

/etc/X11/xorg.conf.d/40-monitor.conf

Code : Tout sélectionner

Section "Monitor"
    Identifier             "Monitor0"
    Option                 "DPI" "109 x 109"
EndSection

50-vmmouse.conf

Code : Tout sélectionner

Section "InputClass"
   Identifier  "vmmouse"
   MatchIsPointer  "on"
   MatchTag  "vmmouse"
   Driver  "vmmouse"
EndSection

Je précise enfin que mon soucis de police est résolu, mais que j'ai deux dommages collatéraux :
- slim ne lance plus i3 (objet de ce topic)
- mon deuxième clavier TypeMatrix n'est pas en disposition Bépo alors qu'il l'était avant (grâce au fichier 30-keyboard.conf) : je soupçonne gdm et j'attends de voir si le retour de slim résoudra le problème. Mais s'il le faut je me trompe et les deux problèmes sont liés.

[benjarobin]

Sachant que ton .xinitrc est en partie faux, je en sait pas comment ceci à pu fonctionner un jour

Code : Tout sélectionner

#!/bin/sh

#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
#

# Fonts
xset +fp /usr/share/fonts/local/
xset fp rehash

# GPG Agent
eval $(gpg-agent --daemon) &

gnome-keyring-daemon &

case $1 in
  gnome)   exec gnome-session;;
  kde)     exec startkde;;
  xfce4)   exec startxfce4;;
  openbox) exec openbox-session;;
  openbox2) exec ck-launch-session dbus-launch openbox-session;;
  i3|*)     exec i3;;
esac

[Spheerys]

C'est peut-être du aux dernières modifs que j'ai faite pour tenter de résoudre le soucis (sur le wiki, il était indiqué que la dernière version de slim ne prenait plus la variable conetant la session par défaut).
Bref j'ai retenté avec ton .xinitrc benrobin, mais ça ne marche tjrs pas.
Je ne peux pas coller ici les erreurs (pas très explicites) qui s'affichent qd je lance startx en tt1 because console sans copier/coller dispo.

Voici toutefois le dernier log de Xorg (qui contient aussi le log du démarrage réussi grâce à gdm) : http://pastebin.archlinux.fr/469812

[benjarobin]

Essaye en ne mettant dans ton .xinitrc que

Code : Tout sélectionner

#!/bin/sh
exec i3

[Spheerys]

Même résultat.
J'ai pris une photo pour que tu aies les messages lors du lancement : http://img.spheerys.fr/images/2013/08/26/bug-i3.jpg

[FoolEcho]

Je ne peux pas coller ici les erreurs (pas très explicites) qui s'affichent qd je lance startx en tt1 because console sans copier/coller dispo.

Lance avec ton utilisateur startx &> ~/startx.log et publie nous le startx.log obtenu (nettement plus pratique que ta photo). Utilise pastebin au besoin.

[Spheerys]

Nettement plus pratique en effet
Voici le log : http://pastebin.archlinux.fr/469815

[FoolEcho]

Je soupçonne un manque de configuration de i3 (qui n'est gestionnaire de fenêtre donc sans configuration, pas sûr que tu aies grand-chose -- mais connais pas i3).

Un peu bloqué, j'ai installé vite fait GDM et là, ma session i3 refonctionne !

Tu as jeté un œil au wiki, qu'as-tu installé exactement ? i3

Code : Tout sélectionner

pacman -Qs i3

[Spheerys]

J'utilise (depuis un moment déjà) la version Git :

Code : Tout sélectionner

$ sudo pacman -Qs i3
[sudo] password for root: 
local/i3-git 4.6.43.g28fafcb-1 (i3-vcs)
    An improved dynamic tiling window manager
local/i3-ipc 0.2.0-1
    inter-process communication with i3, the improved tiling window manager.
local/i3-py-git 156.27f88a6-1
    Python based tools for i3 users and developers
local/i3status-git 2.7.18.gbcc8932-1 (i3-vcs)
    Generates status bar to use with dzen2 or wmii
local/quickswitch-i3 2.0-1
    quickly change to and locate windows in i3

Grâce au wiki, j'ai pu avoir un log de ce qui se passe au lancement de i3 avec un startx :

Code : Tout sélectionner

$ cat .i3/i3log 
26/08/2013 19:58:10 - CORE DUMPS: You are running a development version of i3, so coredumps were automatically enabled (ulimit -c unlimited).
26/08/2013 19:58:10 - CORE DUMPS: Your current working directory is "/home/hedy".
26/08/2013 19:58:10 - CORE DUMPS: Your core_pattern is: |/usr/lib/systemd/systemd-coredump %p %u %g %s %t %e
26/08/2013 19:58:10 - i3 4.6-43-g28fafcb (2013-08-22, branch "makepkg") starting
26/08/2013 19:58:10 - Parsing configfile /home/hedy/.i3/config
deciding for version 4 due to this line: # i3 config file (v4)
26/08/2013 19:58:10 - [libi3] libi3/font.c Using Pango font DejaVu Sans Mono, size 10

Cette histoire de Pango m'interpelle, car j'ai effectivement joué à changer les polices de i3 juste avant l'apparition du problème.
Jusqu'à présent, il me semble que les fonts étaient gérées par xft, et que pango a fait une apparition récente dans i3 (mais je peux me tromper).
Quand le problème est apparu, j'ai bien sûr remis mon fichier conf de i3 d'origine mais à ma grande surprise, ça n'a pas résolu le problème.

Par ailleurs, ce qui est étrange, c'est que le log stipule que i3 utilise Pango, alors que je suis formel : dans mon fichier conf que voici, j'utilise bel et bien xft : http://pastebin.archlinux.fr/469819

Bref y a un truc qui m'échappe, d'autant plus que i3 fonctionne parfaitement avec un lancement via GDM !

[FoolEcho]

Avec un utilisateur test et sans configuration spécifique, ça donne quoi ?
Peut-être recompiler i3 aussi...

[Spheerys]

Avec un nouvel utilisateur, ça marche : i3 se lance avec startx.
Si je colle mon fichier conf de i3, l'utilisateur test se retrouve avec ma config.

J'ai donc fait un deuxième test : virer tout mon /home en ne laissant que le .xinitrc avec un répertoire .i3 vide (sans ma conf donc) : et ben là ça ne veut plus se lancer ! Idem avec mon fichier conf.
Et les fichiers logs restent muets :

Code : Tout sélectionner

$ cat startx.log 


X.Org X Server 1.14.2
Release Date: 2013-06-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.9.7-1-ARCH x86_64 
Current Operating System: Linux narayan 3.10.9-1-ARCH #1 SMP PREEMPT Wed Aug 21 13:49:35 CEST 2013 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw resume=/dev/sdb6 init=/usr/lib/systemd/systemd
Build Date: 01 July 2013  10:48:42AM
 
Current version of pixman: 0.30.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 27 16:23:10 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost

waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.

En 12 ans d'utilisation de Linux, je n'ai jamais vu ça...

PS : j'ai aussi recompilé la dernière version d'i3-git, sans amélioration

[benjarobin]

Ton utilisateur est dans quel groupe ?
C'est très certainement un problème de droit... Encore faut-il le trouver...

[Spheerys]

Code : Tout sélectionner

$ groups hedy
sys disk lp wheel log games video audio optical storage scanner power vpnusers vboxsf vboxusers fuse systemd-journal users

$ groups test
test

Code : Tout sélectionner

$ ls -al /home
total 28
drwxr-xr-x   5 root root   4096 27-08-2013 16:01 ./
drwxr-xr-x  19 root root   4096 29-07-2013 17:03 ../
drwxr-xr-x 158 hedy users 12288 27-08-2013 16:23 hedy/
drwx------   2 root root   4096 28-08-2012 19:58 lost+found/
drwxr-xr-x  12 test users  4096 27-08-2013 16:19 test/

[benjarobin]

Essaye de rajouter tous les groupes de hedy à test, mais je ne pense pas que le souci soit ici...
Le contenu des 2 homes (hedy et test) sont identiques (fichiers cachés compris) ?

[Spheerys]

le home de test était vide
le home de hedy, contient tout mon profil.

Bon ça commence à me gonfler... je pense que je vais rester avec GDM un moment, le seul handicap réel étant la disparition de la disposition bépo de mon deuxième clavier. Mais je vais ouvrir un autre sujet pour ça.

[Spheerys]

J'ai résolu le soucis : ça venait de la version de dev de i3 que j'utilisais.
Je suis repassé sur la version stable et ça a résolu le problème.

Je m'en souviendrai, ça c'est sûr !