[kdm] X server died during startup (contourné)

viperpaulo · Message par **viperpaulo** » dim. 30 mars 2014, 10:06

Bonjour à tous,

J'ai des petits soucis avec le driver nvidia depuis quelque temps ... Je n'ai pas eu le temps de m'en occuper jusqu'ici donc je ne pourrais pas vous dire à quand ça remonte. Au démarrage je me retrouve avec un écran noir et un tiret qui clignote, je switch de tty, me log en root et redémarre kdm et tout rentre dans l'ordre. Mais c'est un peu pénible à force.

Voilà quelques logs :
journalctl -p -b err

Code : Tout sélectionner

mars 30 09:40:09 host kdm[414]: X server died during startup
mars 30 09:40:09 host kdm[414]: X server for display :0 cannot be started, session disabled

/var/log/Xorg.0.log

Code : Tout sélectionner

[    62.895] 
X.Org X Server 1.15.0
Release Date: 2013-12-27
[    62.895] X Protocol Version 11, Revision 0
[    62.895] Build Operating System: Linux 3.12.5-1-ARCH x86_64 
[    62.895] Current Operating System: Linux arch_paco 3.13.7-1-ARCH #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014 x86_64
[    62.895] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1538a8fd-61c7-4486-9864-6400a2e1e666 rw resume=UUID=a455d9d3-a47a-4623-921d-e97c70f29d87 quiet
[    62.895] Build Date: 09 January 2014  08:47:24AM
[    62.895]  
[    62.895] Current version of pixman: 0.32.4
[    62.895] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    62.895] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    62.895] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 30 09:42:38 2014
[    62.895] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    62.895] (==) No Layout section.  Using the first Screen section.
[    62.895] (==) No screen section available. Using defaults.
[    62.895] (**) |-->Screen "Default Screen Section" (0)
[    62.895] (**) |   |-->Monitor "<default monitor>"
[    62.895] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    62.895] (==) Automatically adding devices
[    62.895] (==) Automatically enabling devices
[    62.895] (==) Automatically adding GPU devices
[    62.895] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    62.895] 	Entry deleted from font path.
[    62.895] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    62.895] (==) ModulePath set to "/usr/lib/xorg/modules"
[    62.895] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    62.895] (II) Loader magic: 0x804c80
[    62.895] (II) Module ABI versions:
[    62.895] 	X.Org ANSI C Emulation: 0.4
[    62.895] 	X.Org Video Driver: 15.0
[    62.895] 	X.Org XInput driver : 20.0
[    62.895] 	X.Org Server Extension : 8.0
[    62.895] (II) xfree86: Adding drm device (/dev/dri/card0)
[    62.895] (II) xfree86: Adding drm device (/dev/dri/card1)
[    62.898] (--) PCI: (0:3:0:0) 10de:0e22:10de:0865 rev 161, Mem @ 0xf2000000/33554432, 0xc8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000df00/128, BIOS @ 0x????????/524288
[    62.898] (--) PCI:*(0:4:0:0) 10de:0e22:1458:3501 rev 161, Mem @ 0xf6000000/33554432, 0xd8000000/134217728, 0xe4000000/67108864, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[    62.898] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    62.898] Initializing built-in extension Generic Event Extension
[    62.898] Initializing built-in extension SHAPE
[    62.898] Initializing built-in extension MIT-SHM
[    62.898] Initializing built-in extension XInputExtension
[    62.898] Initializing built-in extension XTEST
[    62.898] Initializing built-in extension BIG-REQUESTS
[    62.899] Initializing built-in extension SYNC
[    62.899] Initializing built-in extension XKEYBOARD
[    62.899] Initializing built-in extension XC-MISC
[    62.899] Initializing built-in extension SECURITY
[    62.899] Initializing built-in extension XINERAMA
[    62.899] Initializing built-in extension XFIXES
[    62.899] Initializing built-in extension RENDER
[    62.899] Initializing built-in extension RANDR
[    62.899] Initializing built-in extension COMPOSITE
[    62.899] Initializing built-in extension DAMAGE
[    62.899] Initializing built-in extension MIT-SCREEN-SAVER
[    62.899] Initializing built-in extension DOUBLE-BUFFER
[    62.899] Initializing built-in extension RECORD
[    62.899] Initializing built-in extension DPMS
[    62.899] Initializing built-in extension Present
[    62.899] Initializing built-in extension DRI3
[    62.899] Initializing built-in extension X-Resource
[    62.899] Initializing built-in extension XVideo
[    62.899] Initializing built-in extension XVideo-MotionCompensation
[    62.899] Initializing built-in extension XFree86-VidModeExtension
[    62.899] Initializing built-in extension XFree86-DGA
[    62.899] Initializing built-in extension XFree86-DRI
[    62.899] Initializing built-in extension DRI2
[    62.899] (II) LoadModule: "glx"
[    62.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    62.912] (II) Module glx: vendor="NVIDIA Corporation"
[    62.912] 	compiled for 4.0.2, module version = 1.0.0
[    62.912] 	Module class: X.Org Server Extension
[    62.912] (II) NVIDIA GLX Module  334.21  Thu Feb 27 13:54:04 PST 2014
[    62.912] Loading extension GLX
[    62.912] (==) Matched nouveau as autoconfigured driver 0
[    62.912] (==) Matched nvidia as autoconfigured driver 1
[    62.912] (==) Matched nv as autoconfigured driver 2
[    62.912] (==) Matched nouveau as autoconfigured driver 3
[    62.912] (==) Matched nvidia as autoconfigured driver 4
[    62.912] (==) Matched nv as autoconfigured driver 5
[    62.912] (==) Matched nouveau as autoconfigured driver 6
[    62.912] (==) Matched nvidia as autoconfigured driver 7
[    62.912] (==) Matched nv as autoconfigured driver 8
[    62.912] (==) Matched modesetting as autoconfigured driver 9
[    62.912] (==) Matched fbdev as autoconfigured driver 10
[    62.912] (==) Matched vesa as autoconfigured driver 11
[    62.912] (==) Assigned the driver to the xf86ConfigLayout
[    62.912] (II) LoadModule: "nouveau"
[    62.912] (WW) Warning, couldn't open module nouveau
[    62.912] (II) UnloadModule: "nouveau"
[    62.912] (II) Unloading nouveau
[    62.912] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    62.912] (II) LoadModule: "nvidia"
[    62.912] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    62.912] (II) Module nvidia: vendor="NVIDIA Corporation"
[    62.912] 	compiled for 4.0.2, module version = 1.0.0
[    62.912] 	Module class: X.Org Video Driver
[    62.912] (II) LoadModule: "nv"
[    62.913] (WW) Warning, couldn't open module nv
[    62.913] (II) UnloadModule: "nv"
[    62.913] (II) Unloading nv
[    62.913] (EE) Failed to load module "nv" (module does not exist, 0)
[    62.913] (II) LoadModule: "modesetting"
[    62.913] (WW) Warning, couldn't open module modesetting
[    62.913] (II) UnloadModule: "modesetting"
[    62.913] (II) Unloading modesetting
[    62.913] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    62.913] (II) LoadModule: "fbdev"
[    62.913] (WW) Warning, couldn't open module fbdev
[    62.913] (II) UnloadModule: "fbdev"
[    62.913] (II) Unloading fbdev
[    62.913] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    62.913] (II) LoadModule: "vesa"
[    62.913] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    62.913] (II) Module vesa: vendor="X.Org Foundation"
[    62.913] 	compiled for 1.15.0, module version = 2.3.2
[    62.913] 	Module class: X.Org Video Driver
[    62.913] 	ABI class: X.Org Video Driver, version 15.0
[    62.913] (II) NVIDIA dlloader X Driver  334.21  Thu Feb 27 13:34:35 PST 2014
[    62.913] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    62.913] (II) VESA: driver for VESA chipsets: vesa
[    62.913] (++) using VT number 7

[    62.913] (II) Loading sub module "fb"
[    62.913] (II) LoadModule: "fb"
[    62.913] (II) Loading /usr/lib/xorg/modules/libfb.so
[    62.913] (II) Module fb: vendor="X.Org Foundation"
[    62.913] 	compiled for 1.15.0, module version = 1.0.0
[    62.913] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    62.913] (WW) Unresolved symbol: fbGetGCPrivateKey
[    62.913] (II) Loading sub module "wfb"
[    62.913] (II) LoadModule: "wfb"
[    62.913] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    62.913] (II) Module wfb: vendor="X.Org Foundation"
[    62.913] 	compiled for 1.15.0, module version = 1.0.0
[    62.913] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    62.914] (II) Loading sub module "ramdac"
[    62.914] (II) LoadModule: "ramdac"
[    62.914] (II) Module "ramdac" already built-in
[    62.914] (WW) Falling back to old probe method for vesa
[    62.914] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    62.914] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    62.914] (==) NVIDIA(0): RGB weight 888
[    62.914] (==) NVIDIA(0): Default visual is TrueColor
[    62.914] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    62.914] (**) NVIDIA(0): Enabling 2D acceleration
[    63.251] (II) NVIDIA(0): Display (LG Electronics L226W (DFP-2)) does not support NVIDIA
[    63.251] (II) NVIDIA(0):     3D Vision stereo.
[    63.251] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    63.252] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:4:0:0 (GPU-0)
[    63.252] (--) NVIDIA(0): Memory: 1048576 kBytes
[    63.252] (--) NVIDIA(0): VideoBIOS: 70.04.13.00.01
[    63.252] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    63.253] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:4:0:0
[    63.253] (--) NVIDIA(0):     CRT-0
[    63.253] (--) NVIDIA(0):     CRT-1
[    63.253] (--) NVIDIA(0):     DFP-0
[    63.253] (--) NVIDIA(0):     DFP-1
[    63.253] (--) NVIDIA(0):     LG Electronics L226W (DFP-2) (boot, connected)
[    63.253] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    63.253] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    63.254] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    63.254] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    63.254] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    63.254] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    63.254] (--) NVIDIA(0): LG Electronics L226W (DFP-2): Internal Dual Link TMDS
[    63.254] (--) NVIDIA(0): LG Electronics L226W (DFP-2): 330.0 MHz maximum pixel clock
[    63.254] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    63.254] (**) NVIDIA(0):     device LG Electronics L226W (DFP-2) (Using EDID
[    63.254] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    63.255] (==) NVIDIA(0): 
[    63.255] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    63.255] (==) NVIDIA(0):     will be used as the requested mode.
[    63.255] (==) NVIDIA(0): 
[    63.255] (II) NVIDIA(0): Validated MetaModes:
[    63.255] (II) NVIDIA(0):     "DFP-2:nvidia-auto-select"
[    63.255] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[    63.276] (--) NVIDIA(0): DPI set to (87, 83); computed from "UseEdidDpi" X config
[    63.276] (--) NVIDIA(0):     option
[    63.276] (II) UnloadModule: "vesa"
[    63.276] (II) Unloading vesa
[    63.276] (--) Depth 24 pixmap format is 32 bpp
[    63.429] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20130102)
[    63.432] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:3:0:0 (GPU-1)
[    63.432] (--) NVIDIA(GPU-1): Memory: 1048576 kBytes
[    63.432] (--) NVIDIA(GPU-1): VideoBIOS: 70.04.13.00.01
[    63.432] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[    63.432] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 460 at PCI:3:0:0
[    63.432] (--) NVIDIA(GPU-1):     CRT-0
[    63.432] (--) NVIDIA(GPU-1):     CRT-1
[    63.432] (--) NVIDIA(GPU-1):     DFP-0
[    63.432] (--) NVIDIA(GPU-1):     DFP-1
[    63.432] (--) NVIDIA(GPU-1):     DFP-2
[    63.432] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[    63.432] (--) NVIDIA(GPU-1): CRT-1: 400.0 MHz maximum pixel clock
[    63.432] (--) NVIDIA(GPU-1): DFP-0: Internal Single Link TMDS
[    63.432] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[    63.432] (--) NVIDIA(GPU-1): DFP-1: Internal Single Link TMDS
[    63.432] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[    63.432] (--) NVIDIA(GPU-1): DFP-2: Internal Single Link TMDS
[    63.432] (--) NVIDIA(GPU-1): DFP-2: 330.0 MHz maximum pixel clock
[    63.432] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    63.432] (II) NVIDIA:     access.
[    63.436] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    63.436] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    63.436] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    63.436] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    63.436] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    63.436] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    63.436] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    63.436] (II) NVIDIA(0):     Config Options in the README.
[    63.438] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[    63.479] Loading extension NV-GLX
[    63.527] (==) NVIDIA(0): Disabling shared memory pixmaps
[    63.527] (==) NVIDIA(0): Backing store enabled
[    63.527] (==) NVIDIA(0): Silken mouse enabled
[    63.527] (==) NVIDIA(0): DPMS enabled
[    63.527] Loading extension NV-CONTROL
[    63.527] Loading extension XINERAMA
[    63.527] (II) Loading sub module "dri2"
[    63.527] (II) LoadModule: "dri2"
[    63.527] (II) Module "dri2" already built-in
[    63.527] (II) NVIDIA(0): [DRI2] Setup complete
[    63.527] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    63.527] (--) RandR disabled
[    63.531] (II) Initializing extension GLX
[    63.620] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    63.620] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    63.620] (II) LoadModule: "evdev"
[    63.621] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    63.621] (II) Module evdev: vendor="X.Org Foundation"
[    63.621] 	compiled for 1.15.0, module version = 2.8.2
[    63.621] 	Module class: X.Org XInput Driver
[    63.621] 	ABI class: X.Org XInput driver, version 20.0
[    63.621] (II) Using input driver 'evdev' for 'Power Button'
[    63.621] (**) Power Button: always reports core events
[    63.621] (**) evdev: Power Button: Device: "/dev/input/event1"
[    63.621] (--) evdev: Power Button: Vendor 0 Product 0x1
[    63.621] (--) evdev: Power Button: Found keys
[    63.621] (II) evdev: Power Button: Configuring as keyboard
[    63.621] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    63.621] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    63.621] (**) Option "xkb_rules" "evdev"
[    63.621] (**) Option "xkb_model" "pc104"
[    63.621] (**) Option "xkb_layout" "fr"
[    63.621] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[    63.647] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    63.647] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    63.647] (II) Using input driver 'evdev' for 'Power Button'
[    63.647] (**) Power Button: always reports core events
[    63.647] (**) evdev: Power Button: Device: "/dev/input/event0"
[    63.647] (--) evdev: Power Button: Vendor 0 Product 0x1
[    63.647] (--) evdev: Power Button: Found keys
[    63.647] (II) evdev: Power Button: Configuring as keyboard
[    63.647] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    63.647] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    63.647] (**) Option "xkb_rules" "evdev"
[    63.647] (**) Option "xkb_model" "pc104"
[    63.647] (**) Option "xkb_layout" "fr"
[    63.647] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[    63.648] (II) config/udev: Adding input device Logitech Logitech G930 Headset (/dev/input/event11)
[    63.648] (**) Logitech Logitech G930 Headset: Applying InputClass "evdev keyboard catchall"
[    63.648] (II) Using input driver 'evdev' for 'Logitech Logitech G930 Headset'
[    63.648] (**) Logitech Logitech G930 Headset: always reports core events
[    63.648] (**) evdev: Logitech Logitech G930 Headset: Device: "/dev/input/event11"
[    63.648] (--) evdev: Logitech Logitech G930 Headset: Vendor 0x46d Product 0xa1f
[    63.648] (--) evdev: Logitech Logitech G930 Headset: Found 14 mouse buttons
[    63.648] (--) evdev: Logitech Logitech G930 Headset: Found keys
[    63.648] (II) evdev: Logitech Logitech G930 Headset: Forcing relative x/y axes to exist.
[    63.648] (II) evdev: Logitech Logitech G930 Headset: Configuring as mouse
[    63.648] (II) evdev: Logitech Logitech G930 Headset: Configuring as keyboard
[    63.648] (**) evdev: Logitech Logitech G930 Headset: YAxisMapping: buttons 4 and 5
[    63.648] (**) evdev: Logitech Logitech G930 Headset: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    63.648] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-2/1-2:1.3/input/input11/event11"
[    63.648] (II) XINPUT: Adding extended input device "Logitech Logitech G930 Headset" (type: KEYBOARD, id 8)
[    63.648] (**) Option "xkb_rules" "evdev"
[    63.648] (**) Option "xkb_model" "pc104"
[    63.648] (**) Option "xkb_layout" "fr"
[    63.648] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[    63.649] (II) config/udev: Adding drm device (/dev/dri/card0)
[    63.649] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[    63.649] (II) No input driver specified, ignoring this device.
[    63.649] (II) This device may have been added with another device file.
[    63.649] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[    63.649] (II) No input driver specified, ignoring this device.
[    63.649] (II) This device may have been added with another device file.
[    63.650] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[    63.650] (II) No input driver specified, ignoring this device.
[    63.650] (II) This device may have been added with another device file.
[    63.650] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[    63.650] (II) No input driver specified, ignoring this device.
[    63.650] (II) This device may have been added with another device file.
[    63.650] (II) config/udev: Adding drm device (/dev/dri/card1)
[    63.650] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[    63.650] (II) No input driver specified, ignoring this device.
[    63.650] (II) This device may have been added with another device file.
[    63.651] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[    63.651] (II) No input driver specified, ignoring this device.
[    63.651] (II) This device may have been added with another device file.
[    63.651] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[    63.651] (II) No input driver specified, ignoring this device.
[    63.651] (II) This device may have been added with another device file.
[    63.651] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[    63.651] (II) No input driver specified, ignoring this device.
[    63.651] (II) This device may have been added with another device file.
[    63.651] (II) config/udev: Adding input device Logitech Logitech BT Mini-Receiver (/dev/input/event22)
[    63.651] (**) Logitech Logitech BT Mini-Receiver: Applying InputClass "evdev keyboard catchall"
[    63.652] (II) Using input driver 'evdev' for 'Logitech Logitech BT Mini-Receiver'
[    63.652] (**) Logitech Logitech BT Mini-Receiver: always reports core events
[    63.652] (**) evdev: Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event22"
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Vendor 0x46d Product 0xc713
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Found keys
[    63.652] (II) evdev: Logitech Logitech BT Mini-Receiver: Configuring as keyboard
[    63.652] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input22/event22"
[    63.652] (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD, id 9)
[    63.652] (**) Option "xkb_rules" "evdev"
[    63.652] (**) Option "xkb_model" "pc104"
[    63.652] (**) Option "xkb_layout" "fr"
[    63.652] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[    63.652] (II) config/udev: Adding input device Logitech Logitech BT Mini-Receiver (/dev/input/event23)
[    63.652] (**) Logitech Logitech BT Mini-Receiver: Applying InputClass "evdev pointer catchall"
[    63.652] (**) Logitech Logitech BT Mini-Receiver: Applying InputClass "evdev keyboard catchall"
[    63.652] (II) Using input driver 'evdev' for 'Logitech Logitech BT Mini-Receiver'
[    63.652] (**) Logitech Logitech BT Mini-Receiver: always reports core events
[    63.652] (**) evdev: Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event23"
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Vendor 0x46d Product 0xc714
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Found 16 mouse buttons
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Found scroll wheel(s)
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Found relative axes
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Found x and y relative axes
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Found absolute axes
[    63.652] (II) evdev: Logitech Logitech BT Mini-Receiver: Forcing absolute x/y axes to exist.
[    63.652] (--) evdev: Logitech Logitech BT Mini-Receiver: Found keys
[    63.653] (II) evdev: Logitech Logitech BT Mini-Receiver: Configuring as mouse
[    63.653] (II) evdev: Logitech Logitech BT Mini-Receiver: Configuring as keyboard
[    63.653] (II) evdev: Logitech Logitech BT Mini-Receiver: Adding scrollwheel support
[    63.653] (**) evdev: Logitech Logitech BT Mini-Receiver: YAxisMapping: buttons 4 and 5
[    63.653] (**) evdev: Logitech Logitech BT Mini-Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    63.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.3/5-1.3:1.0/input/input23/event23"
[    63.653] (II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD, id 10)
[    63.653] (**) Option "xkb_rules" "evdev"
[    63.653] (**) Option "xkb_model" "pc104"
[    63.653] (**) Option "xkb_layout" "fr"
[    63.653] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[    63.653] (II) evdev: Logitech Logitech BT Mini-Receiver: initialized for relative axes.
[    63.653] (WW) evdev: Logitech Logitech BT Mini-Receiver: ignoring absolute axes.
[    63.653] (**) Logitech Logitech BT Mini-Receiver: (accel) keeping acceleration scheme 1
[    63.653] (**) Logitech Logitech BT Mini-Receiver: (accel) acceleration profile 0
[    63.653] (**) Logitech Logitech BT Mini-Receiver: (accel) acceleration factor: 2.000
[    63.653] (**) Logitech Logitech BT Mini-Receiver: (accel) acceleration threshold: 4
[    63.653] (II) config/udev: Adding input device Logitech Logitech BT Mini-Receiver (/dev/input/mouse1)
[    63.653] (II) No input driver specified, ignoring this device.
[    63.653] (II) This device may have been added with another device file.
[    63.653] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event20)
[    63.653] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    63.653] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    63.653] (**) Logitech USB Receiver: always reports core events
[    63.653] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event20"
[    63.653] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[    63.653] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    63.654] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    63.654] (--) evdev: Logitech USB Receiver: Found relative axes
[    63.654] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    63.654] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    63.654] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    63.654] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    63.654] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    63.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.0/input/input20/event20"
[    63.654] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[    63.654] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    63.654] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    63.654] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    63.654] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    63.654] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    63.654] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    63.654] (II) No input driver specified, ignoring this device.
[    63.654] (II) This device may have been added with another device file.
[    63.654] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event21)
[    63.654] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    63.654] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    63.654] (**) Logitech USB Receiver: always reports core events
[    63.654] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event21"
[    63.654] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[    63.654] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    63.654] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    63.654] (--) evdev: Logitech USB Receiver: Found relative axes
[    63.654] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    63.654] (--) evdev: Logitech USB Receiver: Found absolute axes
[    63.654] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    63.654] (--) evdev: Logitech USB Receiver: Found keys
[    63.654] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    63.654] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    63.654] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    63.654] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    63.654] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    63.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.1/input/input21/event21"
[    63.654] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[    63.654] (**) Option "xkb_rules" "evdev"
[    63.654] (**) Option "xkb_model" "pc104"
[    63.654] (**) Option "xkb_layout" "fr"
[    63.654] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[    63.654] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    63.654] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    63.654] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    63.654] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    63.654] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    63.654] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    63.655] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event9)
[    63.655] (II) No input driver specified, ignoring this device.
[    63.655] (II) This device may have been added with another device file.
[    63.655] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[    63.655] (II) No input driver specified, ignoring this device.
[    63.655] (II) This device may have been added with another device file.
[    63.655] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[    63.655] (II) No input driver specified, ignoring this device.
[    63.655] (II) This device may have been added with another device file.
[    63.655] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event6)
[    63.655] (II) No input driver specified, ignoring this device.
[    63.655] (II) This device may have been added with another device file.
[    63.655] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event5)
[    63.655] (II) No input driver specified, ignoring this device.
[    63.655] (II) This device may have been added with another device file.
[    63.655] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event4)
[    63.655] (II) No input driver specified, ignoring this device.
[    63.655] (II) This device may have been added with another device file.
[    63.655] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event3)
[    63.655] (II) No input driver specified, ignoring this device.
[    63.655] (II) This device may have been added with another device file.
[    63.656] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event2)
[    63.656] (II) No input driver specified, ignoring this device.
[    63.656] (II) This device may have been added with another device file.
[    63.656] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[    63.656] (II) No input driver specified, ignoring this device.
[    63.656] (II) This device may have been added with another device file.
[    68.941] (II) NVIDIA(GPU-0): Display (LG Electronics L226W (DFP-2)) does not support NVIDIA
[    68.941] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    77.657] (II) NVIDIA(GPU-0): Display (LG Electronics L226W (DFP-2)) does not support NVIDIA
[    77.657] (II) NVIDIA(GPU-0):     3D Vision stereo.

Pour info, j'ai deux cartes identiques et quand je ne configure pas de 20-nvidia.conf, kdm démarre en 1024x768 et en restartant X ça reprend une résolution normale. Mais ça prend le comportement décrit plus haut quand je met un fichier de configuration aussi bateau que celui là :

Code : Tout sélectionner

Section "Device"                                                                                                     
    Identifier     "Device0"                                                                                         
    Driver         "nvidia"                                                                                          
    VendorName     "NVIDIA Corporation"                                                                              
EndSection

Voilà, si vous avez des idées ...
yaourt -Qs nvidia

Code : Tout sélectionner

multilib/lib32-libvdpau 0.7-2
    Nvidia VDPAU library
multilib/lib32-nvidia-libgl 334.21-5
    NVIDIA drivers libraries symlinks (32-bit)
multilib/lib32-nvidia-utils 334.21-5
    NVIDIA drivers utilities (32-bit)
extra/libcl 1.1-3
    OpenCL library and ICD loader from NVIDIA
extra/libvdpau 0.7-1
    Nvidia VDPAU library
extra/nvidia 334.21-2
    NVIDIA drivers for linux
extra/nvidia-libgl 334.21-7
    NVIDIA drivers libraries symlinks
extra/nvidia-lts 334.21-3
    NVIDIA drivers for linux-lts
extra/nvidia-utils 334.21-7
    NVIDIA drivers utilities

Message par **benjarobin** » dim. 30 mars 2014, 11:10

Je crois que tu nous donnes le log de Xorg suite au redémarrage. Il est important de nous donner le log de Xorg avant que tu le relances.
Peux tu nous donner aussi la sortie de dmesg, la aussi avant de relancer X

viperpaulo · Message par **viperpaulo** » dim. 30 mars 2014, 11:23

Vos désirs sont des ordres

Xorg.0.log
http://pastebin.archlinux.fr/499363
dmesg
http://pastebin.archlinux.fr/499364

Effectivement, là on commence à voir sortir des erreurs

Message par **benjarobin** » dim. 30 mars 2014, 11:55

Je dirais que ton PC démarre trop vite (lancer X au bout de seulement 3,4 secondes depuis le boot)... Et qu'il y a une dépendance qui n'est pas géré correctement.
Pour le confirmer peux tu désactiver kdm.service, comme ceci tu arriveras sur un tty. Puis tu te connectes en root et tu lances kdm.service.
Si cela fonctionne ma théorie est bonne... As tu un SSD ?

viperpaulo · Message par **viperpaulo** » lun. 31 mars 2014, 07:59

Effectivement j'avais la même impression puisque quand je fais un restart de kdm, tout se lance normalement... J'ai bien un ssd.

Message par **benjarobin** » lun. 31 mars 2014, 09:42

Tu n'as pas répondu à ma question.
Sinon tu peux tenter de forcer le chargement du module nvidia avant que soit lancé kdm.service

viperpaulo · Message par **viperpaulo** » lun. 31 mars 2014, 19:42

Je viens de tester et effectivement ça fonctionne comme ça, je m'en doutais mais je voulais tester...
j'ai déjà essayé de désactiver kdm puis le réactiver pour essayer de remettre en place une dépendance cassée mais ça n'avais pas eu d'effet..
Peut-être faut-il modifier le kdm.service

EDIT:
Je ne sais pas si ça pourrait avoir un lien mais j'ai remarqué ça :
pacman -Qk

Code : Tout sélectionner

avertissement : polkit: /etc/polkit-1/rules.d/50-default.rules (Permission non accordée)
polkit : 152 fichiers au total, 1 fichier manquant

Message par **benjarobin** » lun. 31 mars 2014, 21:33

Aucun rapport, il fallait juste lancer pacman en root.

Sinon tu peux tenter de forcer le chargement du module nvidia avant que soit lancé kdm.service

Pour cela tu as 3 tests possibles (Je ne sais pas quelle solution fonctionnera) :

Charger le module nvidia via :
Code : Tout sélectionner
```
echo nvidia > /etc/modules-load.d/nvidia.conf
```
Créer un service qui doit être lancé avant la target graphique et qui charge le module nvidia
Ajouter le module nvidia au fichier /etc/mkinitcpio.conf, ligne MODULES=""

viperpaulo · Message par **viperpaulo** » mar. 01 avr. 2014, 07:52

Une fois de plus, Merci!
Tout est rentré dans l'ordre en forçant le démarrage du module.

Message par **benjarobin** » mar. 01 avr. 2014, 09:45

Tu es passé via /etc/modules-load.d/ ?

viperpaulo · Message par **viperpaulo** » mar. 01 avr. 2014, 12:32

non par mkinitcpio

jean_no · Message par **jean_no** » mar. 01 avr. 2014, 17:30

Salut

Dans ce cas, sois très vigilant lors d'une mise à jour de linux et de nvidia en même temps, car la maj de nvidia se fait après celle de linux.

Il y a une autre solution beaucoup plus pérenne :
https://bbs.archlinux.org/viewtopic.php?id=173153
voir le post 12 et 18 de brain0 .

A+

Message par **benjarobin** » mar. 01 avr. 2014, 18:39

Tu as en effet 100 fois raison, c'est pour cela que j'avais mit la solution mkinitcpio en dernier.
J'avais proposé la 2ième solution, mais je ne savais pas comment l'implémenter. Maintenant je sais merci

viperpaulo · Message par **viperpaulo** » mar. 01 avr. 2014, 20:32

En effet j'ai changé de méthode... merci à vous deux !

Arch Linux

Archlinux.fr [Forums]

[kdm] X server died during startup (contourné)

[kdm] X server died during startup (contourné)

Re: [kdm] X server died during startup

Re: [kdm] X server died during startup

Re: [kdm] X server died during startup

Re: [kdm] X server died during startup

Re: [kdm] X server died during startup

Re: [kdm] X server died during startup

Re: [kdm] X server died during startup

Re: [kdm] X server died during startup (contourné)

Re: [kdm] X server died during startup (contourné)

Re: [kdm] X server died during startup (contourné)

Re: [kdm] X server died during startup (contourné)

Re: [kdm] X server died during startup (contourné)

Re: [kdm] X server died during startup (contourné)