[ALSA] Carte son par défaut (RÉSOLU)

Skwad · Message par **Skwad** » sam. 12 déc. 2015, 13:30

Bonjour la communauté,

J'ai "upgrade" ma config de PC (carte mère, processeur, carte graphique et mémoire), ai gardé le système en l'état et il semble s'être bien adapté hormis ce petit souci de son.

Au démarrage, alsamixer m'indique comme périphérique de sortie HDA Intel HDMI. Je ne sais pas comment indiquer à ALSA quel périphérique il doit utiliser par défaut.

L'environnement utilisé est AwesomeWM (openbox en roue de secours) donc aucun outil graphique. Pulseaudio n'est pas installé.

Quelques infos pour vous aider à m'aider :

Code : Tout sélectionner

cat /proc/asound/modules
 0 snd_hda_intel
 1 snd_hda_intel
 2 snd_hda_intel

Code : Tout sélectionner

cat /proc/asound/cards
 0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                      HDA Intel HDMI at 0xf7e14000 irq 34
 1 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf7e10000 irq 32
 2 [HDMI_1         ]: HDA-Intel - HDA ATI HDMI
                      HDA ATI HDMI at 0xf7d60000 irq 33

Code : Tout sélectionner

aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: HDMI [HDA Intel HDMI], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: HDMI [HDA Intel HDMI], périphérique 7: HDMI 1 [HDMI 1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: HDMI [HDA Intel HDMI], périphérique 8: HDMI 2 [HDMI 2]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: PCH [HDA Intel PCH], périphérique 0: ALC887-VD Analog [ALC887-VD Analog]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: PCH [HDA Intel PCH], périphérique 1: ALC887-VD Digital [ALC887-VD Digital]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: HDMI_1 [HDA ATI HDMI], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: HDMI_1 [HDA ATI HDMI], périphérique 7: HDMI 1 [HDMI 1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: HDMI_1 [HDA ATI HDMI], périphérique 8: HDMI 2 [HDMI 2]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: HDMI_1 [HDA ATI HDMI], périphérique 9: HDMI 3 [HDMI 3]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: HDMI_1 [HDA ATI HDMI], périphérique 10: HDMI 4 [HDMI 4]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 2: HDMI_1 [HDA ATI HDMI], périphérique 11: HDMI 5 [HDMI 5]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0

Code : Tout sélectionner

cat /etc/modprobe.d/sound.conf
alias snd-card-1 snd-hda-intel
alias sound-slot-1 snd-hda-intel

Code : Tout sélectionner

cat /etc/asound.state
state.Intel {
	control.1 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -4650
		comment.dbmax 0
		iface MIXER
		name 'Front Playback Volume'
		value.0 31
		value.1 31
	}
	control.2 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Front Playback Switch'
		value.0 true
		value.1 true
	}
	control.3 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -4650
		comment.dbmax 0
		iface MIXER
		name 'Surround Playback Volume'
		value.0 0
		value.1 0
	}
	control.4 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Surround Playback Switch'
		value.0 false
		value.1 false
	}
	control.5 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		comment.dbmin -4650
		comment.dbmax 0
		iface MIXER
		name 'Center Playback Volume'
		value 0
	}
	control.6 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		comment.dbmin -4650
		comment.dbmax 0
		iface MIXER
		name 'LFE Playback Volume'
		value 0
	}
	control.7 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Center Playback Switch'
		value false
	}
	control.8 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'LFE Playback Switch'
		value false
	}
	control.9 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -4650
		comment.dbmax 0
		iface MIXER
		name 'Side Playback Volume'
		value.0 0
		value.1 0
	}
	control.10 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Side Playback Switch'
		value.0 false
		value.1 false
	}
	control.11 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Headphone Playback Switch'
		value.0 true
		value.1 true
	}
	control.12 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'CD Playback Volume'
		value.0 0
		value.1 0
	}
	control.13 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'CD Playback Switch'
		value.0 false
		value.1 false
	}
	control.14 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'Line Playback Volume'
		value.0 0
		value.1 0
	}
	control.15 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Line Playback Switch'
		value.0 false
		value.1 false
	}
	control.16 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'Mic Playback Volume'
		value.0 0
		value.1 0
	}
	control.17 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 3'
		comment.dbmin 0
		comment.dbmax 3000
		iface MIXER
		name 'Mic Boost'
		value.0 0
		value.1 0
	}
	control.18 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Mic Playback Switch'
		value.0 false
		value.1 false
	}
	control.19 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'Front Mic Playback Volume'
		value.0 0
		value.1 0
	}
	control.20 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 3'
		comment.dbmin 0
		comment.dbmax 3000
		iface MIXER
		name 'Front Mic Boost'
		value.0 0
		value.1 0
	}
	control.21 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Front Mic Playback Switch'
		value.0 false
		value.1 false
	}
	control.22 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 '6ch'
		comment.item.1 '8ch'
		iface MIXER
		name 'Channel Mode'
		value '6ch'
	}
	control.23 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Capture Switch'
		value.0 false
		value.1 false
	}
	control.24 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Capture Switch'
		index 1
		value.0 false
		value.1 false
	}
	control.25 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -1650
		comment.dbmax 3000
		iface MIXER
		name 'Capture Volume'
		value.0 0
		value.1 0
	}
	control.26 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -1650
		comment.dbmax 3000
		iface MIXER
		name 'Capture Volume'
		index 1
		value.0 0
		value.1 0
	}
	control.27 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 'Front Mic'
		comment.item.2 Line
		comment.item.3 CD
		iface MIXER
		name 'Input Source'
		value Mic
	}
	control.28 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 'Front Mic'
		comment.item.2 Line
		comment.item.3 CD
		iface MIXER
		name 'Input Source'
		index 1
		value Mic
	}
	control.29 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Con Mask'
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.30 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.31 {
		comment.access 'read write'
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.32 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Switch'
		value false
	}
	control.33 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'IEC958 Default PCM Playback Switch'
		value true
	}
	control.34 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'IEC958 Capture Switch'
		value false
	}
	control.35 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Capture Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.36 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'Beep Playback Volume'
		value.0 0
		value.1 0
	}
	control.37 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Beep Playback Switch'
		value.0 false
		value.1 false
	}
	control.38 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		comment.dbmin -4650
		comment.dbmax 0
		iface MIXER
		name 'Master Playback Volume'
		value 31
	}
	control.39 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Master Playback Switch'
		value true
	}
	control.40 {
		comment.access 'read write user'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 255'
		comment.tlv '0000000100000008ffffec1400000014'
		comment.dbmin -5100
		comment.dbmax 0
		iface MIXER
		name 'PCM Playback Volume'
		value.0 255
		value.1 255
	}
}
state.HDMI {
	control.1 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Con Mask'
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.2 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.3 {
		comment.access 'read write'
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.4 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Switch'
		value false
	}
}
state.Camera {
	control {
	}
}

Code : Tout sélectionner

cat /usr/share/alsa/alsa.conf
#
#  ALSA library configuration file
#

# pre-load the configuration files

@hooks [
	{
		func load
		files [
			{
				@func concat
				strings [
					{ @func datadir }
					"/alsa.conf.d/"
				]
			}
			"/etc/asound.conf"
			"~/.asoundrc"
		]
		errors false
	}
]

# load card-specific configuration files (on request)

cards.@hooks [
	{
		func load
		files [
			{
				@func concat
				strings [
					{ @func datadir }
					"/cards/aliases.conf"
				]
			}
		]
	}
	{
		func load_for_all_cards
		files [
			{
				@func concat
				strings [
					{ @func datadir }
					"/cards/"
					{ @func private_string }
					".conf"
				]
			}
		]
		errors false
	}
]

#
# defaults
#

# show all name hints also for definitions without hint {} section
defaults.namehint.showall off
# show just basic name hints
defaults.namehint.basic on
# show extended name hints
defaults.namehint.extended off
#
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.compat 0
defaults.pcm.minperiodtime 5000		# in us
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_gid audio
defaults.pcm.ipc_perm 0660
defaults.pcm.dmix.max_periods 0
defaults.pcm.dmix.rate 48000
defaults.pcm.dmix.format "unchanged"
defaults.pcm.dmix.card defaults.pcm.card
defaults.pcm.dmix.device defaults.pcm.device
defaults.pcm.dsnoop.card defaults.pcm.card
defaults.pcm.dsnoop.device defaults.pcm.device
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround21.card defaults.pcm.card
defaults.pcm.surround21.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
# truncate files via file or tee PCM
defaults.pcm.file_format	"raw"
defaults.pcm.file_truncate	true
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0

#
#  PCM interface
#

# redirect to load-on-demand extended pcm definitions
pcm.cards cards.pcm

pcm.default cards.pcm.default
pcm.sysdefault cards.pcm.default
pcm.front cards.pcm.front
pcm.rear cards.pcm.rear
pcm.center_lfe cards.pcm.center_lfe
pcm.side cards.pcm.side
pcm.surround21 cards.pcm.surround21
pcm.surround40 cards.pcm.surround40
pcm.surround41 cards.pcm.surround41
pcm.surround50 cards.pcm.surround50
pcm.surround51 cards.pcm.surround51
pcm.surround71 cards.pcm.surround71
pcm.iec958 cards.pcm.iec958
pcm.spdif iec958
pcm.hdmi cards.pcm.hdmi
pcm.dmix cards.pcm.dmix
pcm.dsnoop cards.pcm.dsnoop
pcm.modem cards.pcm.modem
pcm.phoneline cards.pcm.phoneline

pcm.hw {
	@args [ CARD DEV SUBDEV ]
	@args.CARD {
		type string
		default {
			@func getenv
			vars [
				ALSA_PCM_CARD
				ALSA_CARD
			]
			default {
				@func refer
				name defaults.pcm.card
			}
		}
	}
	@args.DEV {
		type integer
		default {
			@func igetenv
			vars [
				ALSA_PCM_DEVICE
			]
			default {
				@func refer
				name defaults.pcm.device
			}
		}
	}
	@args.SUBDEV {
		type integer
		default {
			@func refer
			name defaults.pcm.subdevice
		}
	}		
	type hw
	card $CARD
	device $DEV
	subdevice $SUBDEV
	hint {
		show {
			@func refer
			name defaults.namehint.extended
		}
		description "Direct hardware device without any conversions"
	}
}

pcm.plughw {
	@args [ CARD DEV SUBDEV ]
	@args.CARD {
		type string
		default {
			@func getenv
			vars [
				ALSA_PCM_CARD
				ALSA_CARD
			]
			default {
				@func refer
				name defaults.pcm.card
			}
		}
	}
	@args.DEV {
		type integer
		default {
			@func igetenv
			vars [
				ALSA_PCM_DEVICE
			]
			default {
				@func refer
				name defaults.pcm.device
			}
		}
	}
	@args.SUBDEV {
		type integer
		default {
			@func refer
			name defaults.pcm.subdevice
		}
	}		
	type plug
	slave.pcm {
		type hw
		card $CARD
		device $DEV
		subdevice $SUBDEV
	}
	hint {
		show {
			@func refer
			name defaults.namehint.extended
		}
		description "Hardware device with all software conversions"
	}
}

pcm.plug {
	@args [ SLAVE ]
	@args.SLAVE {
		type string
	}
	type plug
	slave.pcm $SLAVE
}

pcm.shm {
	@args [ SOCKET PCM ]
	@args.SOCKET {
		type string
	}
	@args.PCM {
		type string
	}
	type shm
	server $SOCKET
	pcm $PCM
}

pcm.tee {
	@args [ SLAVE FILE FORMAT ]
	@args.SLAVE {
		type string
	}
	@args.FILE {
		type string
	}
	@args.FORMAT {
		type string
		default {
			@func refer
			name defaults.pcm.file_format
		}
	}
	type file
	slave.pcm $SLAVE
	file $FILE
	format $FORMAT
	truncate {
		@func refer
		name defaults.pcm.file_truncate
	}
}

pcm.file {
	@args [ FILE FORMAT ]
	@args.FILE {
		type string
	}
	@args.FORMAT {
		type string
		default {
			@func refer
			name defaults.pcm.file_format
		}
	}
	type file
	slave.pcm null
	file $FILE
	format $FORMAT
	truncate {
		@func refer
		name defaults.pcm.file_truncate
	}
}

pcm.null {
	type null
	hint {
		show {
			@func refer
			name defaults.namehint.basic
		}
		description "Discard all samples (playback) or generate zero samples (capture)"
	}
}

#
#  Control interface
#
	
ctl.sysdefault {
	type hw
	card {
		@func getenv
		vars [
			ALSA_CTL_CARD
			ALSA_CARD
		]
		default {
			@func refer
			name defaults.ctl.card
		}
	}
	hint.description "Default control device"
}
ctl.default ctl.sysdefault

ctl.hw {
	@args [ CARD ]
	@args.CARD {
		type string
		default {
			@func getenv
			vars [
				ALSA_CTL_CARD
				ALSA_CARD
			]
			default {
				@func refer
				name defaults.ctl.card
			}
		}
	}
	type hw
	card $CARD
	hint.description "Direct control device"
}

ctl.shm {
	@args [ SOCKET CTL ]
	@args.SOCKET {
		type string
	}
	@args.CTL {
		type string
	}
	type shm
	server $SOCKET
	ctl $CTL
}

#
#  RawMidi interface
#

rawmidi.default {
	type hw
	card {
		@func getenv
		vars [
			ALSA_RAWMIDI_CARD
			ALSA_CARD
		]
		default {
			@func refer
			name defaults.rawmidi.card
		}
	}
	device {
		@func igetenv
		vars [
			ALSA_RAWMIDI_DEVICE
		]
		default {
			@func refer
			name defaults.rawmidi.device
		}
	}
	hint.description "Default raw MIDI device"
}

rawmidi.hw {
	@args [ CARD DEV SUBDEV ]
	@args.CARD {
		type string
		default {
			@func getenv
			vars [
				ALSA_RAWMIDI_CARD
				ALSA_CARD
			]
			default {
				@func refer
				name defaults.rawmidi.card
			}
		}
	}
	@args.DEV {
		type integer
		default {
			@func igetenv
			vars [
				ALSA_RAWMIDI_DEVICE
			]
			default {
				@func refer
				name defaults.rawmidi.device
			}
		}
	}
	@args.SUBDEV {
		type integer
		default -1
	}
	type hw
	card $CARD
	device $DEV
	subdevice $SUBDEV
	hint {
		description "Direct rawmidi driver device"
		device $DEV
	}
}

rawmidi.virtual {
	@args [ MERGE ]
	@args.MERGE {
		type string
		default 1
	}
	type virtual
	merge $MERGE
}

#
#  Sequencer interface
#

seq.default {
	type hw
	hint.description "Default sequencer device"
}

seq.hw {
	type hw
}

#
#  HwDep interface
#

hwdep.default {
	type hw
	card {
		@func getenv
		vars [
			ALSA_HWDEP_CARD
			ALSA_CARD
		]
		default {
			@func refer
			name defaults.hwdep.card
		}
	}
	device {
		@func igetenv
		vars [
			ALSA_HWDEP_DEVICE
		]
		default {
			@func refer
			name defaults.hwdep.device
		}
	}
	hint.description "Default hardware dependent device"
}

hwdep.hw {
	@args [ CARD DEV ]
	@args.CARD {
		type string
		default {
			@func getenv
			vars [
				ALSA_HWDEP_CARD
				ALSA_CARD
			]
			default {
				@func refer
				name defaults.hwdep.card
			}
		}
	}
	@args.DEV {
		type integer
		default {
			@func igetenv
			vars [
				ALSA_HWDEP_DEVICE
			]
			default {
				@func refer
				name defaults.hwdep.device
			}
		}
	}
	type hw
	card $CARD
	device $DEV
	hint {
		description "Direct hardware dependent device"
		device $DEV
	}
}

#
#  Timer interface
#

timer_query.default {
	type hw
}

timer_query.hw {
	type hw
}

timer.default {
	type hw
	class {
		@func refer
		name defaults.timer.class
	}
	sclass {
		@func refer
		name defaults.timer.sclass
	}
	card {
		@func refer
		name defaults.timer.card
	}
	device {
		@func refer
		name defaults.timer.device
	}
	subdevice {
		@func refer
		name defaults.timer.subdevice
	}
	hint.description "Default timer device"
}

timer.hw {
	@args [ CLASS SCLASS CARD DEV SUBDEV ]
	@args.CLASS {
		type integer
		default {
			@func refer
			name defaults.timer.class
		}
	}
	@args.SCLASS {
		type integer
		default {
			@func refer
			name defaults.timer.sclass
		}
	}
	@args.CARD {
		type string
		default {
			@func refer
			name defaults.timer.card
		}
	}
	@args.DEV {
		type integer
		default {
			@func refer
			name defaults.timer.device
		}
	}
	@args.SUBDEV {
		type integer
		default {
			@func refer
			name defaults.timer.subdevice
		}
	}
	type hw
	class $CLASS
	sclass $SCLASS
	card $CARD
	device $DEV
	subdevice $SUBDEV
	hint {
		description "Direct timer device"
		device $DEV
	}
}

Sur le wiki anglophone https://wiki.archlinux.org/index.php/Ad ... sound_card on y parle de /etc/asound.conf mais je n'en ai pas.
Je peine à assimiler tous ces fichiers de configuration. Les 2 derniers ci-dessus sont indigestes.

Je suppose que je dois utiliser :
1 snd_hda_intel qui correspond à

1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e10000 irq 32 qui correspond à

carte 1: PCH [HDA Intel PCH], périphérique 0: ALC887-VD Analog [ALC887-VD Analog]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0

carte 1: PCH [HDA Intel PCH], périphérique 1: ALC887-VD Digital [ALC887-VD Digital]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0

Jusqu'ici j'ai tenté d'initialiser les cartes avec alsactl init, de supprimer/réinstaller alsa avec la commande pacman -Rdds alsa-utils alsa-lib + renommage de /var/lib/alsa/asound.state en /var/lib/alsa/asound.state.old

Je me suis aidé de ce sujet http://www.linuxquestions.org/questions ... 175439197/ et du lien suggéré mais ça date un peu.

Un petit coup de main peut-être ?

Message par **benjarobin** » sam. 12 déc. 2015, 13:42

Voir ceci : viewtopic.php?f=5&t=16499&p=140138#p140138

Skwad · Message par **Skwad** » sam. 12 déc. 2015, 14:15

Quel réactivité !
Il fallait donc bien créer le fichier /etc/asound.conf avec comme contenu

Code : Tout sélectionner

defaults.ctl.card 1
defaults.pcm.card 1
defaults.timer.card 1

Grand merci ! Jamais je n'aurai trouvé le contenu avec l'aide du wiki. Un exemple aurait été apprécié et aurait éviter quelques sujets supplémentaires sur le forum à ce propos.

Je passe en résolu.

Arch Linux

Archlinux.fr [Forums]

[ALSA] Carte son par défaut (RÉSOLU)

[ALSA] Carte son par défaut (RÉSOLU)

Re: [ALSA] Carte son par défaut (en cours)

Re: [ALSA] Carte son par défaut (en cours)