j'ai un problème avec ma carte usb wifi (awus036h) driver rtl8187 inclut dans le noyau ...
Je me suis reféré au wiki http://wiki.archlinux.org/index.php/Rtl8187_wireless.
Les deux premières façon de faire n'ont rien donnée.
Le problème étant de me connecter à mon point d'accès, ce faisant wpa_supplicant rencontre des difficultées d'association.
Je vous poste les différents logs ci-dessous que vous puissiez vois par vous même.
Si quelqu'un a une idée/piste, je suis prenneur !
Merci à tous.
Sortie dmesg :
Code : Tout sélectionner
Oct 12 19:46:25 localhost kernel: wlan1: direct probe to 00:00:00:00:00:00 (try 1)
Oct 12 19:46:25 localhost kernel: wlan1: direct probe to 00:00:00:00:00:00 (try 2)
Oct 12 19:46:26 localhost kernel: wlan1: direct probe to 00:00:00:00:00:00 (try 3)
Oct 12 19:46:26 localhost kernel: wlan1: direct probe to 00:00:00:00:00:00 timed out
.....
Code : Tout sélectionner
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=1
Priority group 0
id=0 ssid='NEUF_XXXX'
WEXT: cfg80211-based driver detected
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:00:00:00:00:00
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): ba ........................... 13
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan1
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b1a len=8
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
Scan requested (ret=0) - scan timeout 5 seconds
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b19 len=8
Received 1768 bytes of scan results (5 BSSes)
BSS: Start scan result update 1
BSS: Add new id 0 BSSID 00:00:00:00:00:00 SSID 'XXXXXX'
BSS: Add new id 1 BSSID 00:00:00:00:00:00 SSID 'XXXXXX'
BSS: Add new id 2 BSSID 00:00:00:00:00:00 SSID 'NEUF_XXXX'
BSS: Add new id 3 BSSID 00:00:00:00:00:00 SSID 'XXXXXX'
BSS: Add new id 4 BSSID 00:00:00:00:00:00 SSID 'XXXXXX'
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:00:00:00:00:00 ssid='XXXXXX' wpa_ie_len=28 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
1: 00:00:00:00:00:00 ssid='XXXXXX' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
2: 00:00:00:00:00:00 ssid='XXXXXX' wpa_ie_len=28 rsn_ie_len=0 caps=0x11
selected based on WPA IE
selected WPA AP 00:00:00:00:00:00 ssid='NEUF_XXXX'
Trying to associate with 00:00:00:00:00:00 (SSID='NEUF_XXXX' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=30): dd ........... 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd .......... 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_psk
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portControl=Auto
EAPOL: Supplicant port status: Unauthorized
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b1a len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b1a len=17
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:00:00:00:00:00 into blacklist // le BSSID concerné :/
..................
