Je n'arrive pas à faire fonctionner ma X-Fi (ni avec oss, ni avec alsa) ! J'ai essayé pas mal de choses et cherché partout dans les forums mais je n'ai rien trouvé de probant.
Voici quelques détails :
Je tourne avec le kernel 2.6.37 en 64bit :
Code : Tout sélectionner
[noar@arch-noar ~]$ uname -a
Linux arch-noar 2.6.37-ARCH #1 SMP PREEMPT Fri Mar 25 15:10:00 CET 2011 x86_64 Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux
Code : Tout sélectionner
[noar@arch-noar rc.d]$ lspci | grep -i creative
03:00.0 Audio device: Creative Labs X-Fi Titanium series [EMU20k2] (rev 03)
Code : Tout sélectionner
[noar@arch-noar rc.d]$ lsmod | grep snd
snd_ctxfi 95682 0
snd_seq_dummy 1479 0
snd_seq_oss 29240 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39509 0
snd_mixer_oss 17730 1 snd_pcm_oss
snd_bt87x 9657 0
snd_pcm 72321 3 snd_ctxfi,snd_pcm_oss,snd_bt87x
snd_timer 19537 2 snd_seq,snd_pcm
snd 58906 9 snd_ctxfi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_bt87x,snd_pcm,snd_timer
soundcore 6161 1 snd
snd_page_alloc 7361 3 snd_ctxfi,snd_bt87x,snd_pcm
Code : Tout sélectionner
[noar@arch-noar rc.d]$ cat /proc/asound/modules
1 snd_bt87x
[noar@arch-noar rc.d]$ cat /proc/asound/cards
1 [Bt878 ]: Bt87x - Brooktree Bt878
Brooktree Bt878 at 0xdfffd000, irq 17
...mon modprobe.conf :#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: Set the locale during daemon startup and during the boot
# process. If set to 'no', the C locale will be used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="fr_FR.utf8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Paris"
KEYMAP="fr-latin9"
CONSOLEFONT="lat9w-16"
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!snd_pcsp)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="arch-noar"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
#Static IP example
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng @network netfs crond dbus)
...mon sound.conf :#
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
#
option snd-pcsp index=2
options snd-ctxfi index=0
Je suis bloqué là depuis une semaine maintenant, j'étais sur Ubuntu Lucid Lynx LTS sans problèmes de son avant.# /etc/modprobe.d/sound.conf
alias snd-card-0 snd-ctxfi
alias sound-slot-0 snd-ctxfi
Des idées ? Toute aide sera la bienvenue !
Merci d'avance,
Noar
