j'ai fais la modif
Code : Tout sélectionner
###
### Sample Wget initialization file .wgetrc
###
## You can use this file to change the default behaviour of wget or to
## avoid having to type many many command-line options. This file does
## not contain a comprehensive list of commands -- look at the manual
## to find out what you can put into this file.
##
## Wget initialization file can reside in /usr/local/etc/wgetrc
## (global, for all users) or $HOME/.wgetrc (for a single user).
##
## To use the settings in this file, you will have to uncomment them,
## as well as change them, in most cases, as the values on the
## commented-out lines are the default values (e.g. "off").
##
## Global settings (useful for setting up in /usr/local/etc/wgetrc).
## Think well before you change them, since they may reduce wget's
## functionality, and make it behave contrary to the documentation:
##
# You can set retrieve quota for beginners by specifying a value
# optionally followed by 'K' (kilobytes) or 'M' (megabytes). The
# default quota is unlimited.
#quota = inf
# You can lower (or raise) the default number of retries when
# downloading a file (default is 20).
#tries = 20
# Lowering the maximum depth of the recursive retrieval is handy to
# prevent newbies from going too "deep" when they unwittingly start
# the recursive retrieval. The default is 5.
#reclevel = 5
# By default Wget uses "passive FTP" transfer where the client
# initiates the data connection to the server rather than the other
# way around. That is required on systems behind NAT where the client
# computer cannot be easily reached from the Internet. However, some
# firewalls software explicitly supports active FTP and in fact has
# problems supporting passive transfer. If you are in such
# environment, use "passive_ftp = off" to revert to active FTP.
#passive_ftp = off
# The "wait" command below makes Wget wait between every connection.
# If, instead, you want Wget to wait only between retries of failed
# downloads, set waitretry to maximum number of seconds to wait (Wget
# will use "linear backoff", waiting 1 second after the first failure
# on a file, 2 seconds after the second failure, etc. up to this max).
#waitretry = 10
##
## Local settings (for a user to set in his $HOME/.wgetrc). It is
## *highly* undesirable to put these settings in the global file, since
## they are potentially dangerous to "normal" users.
##
## Even when setting up your own ~/.wgetrc, you should know what you
## are doing before doing so.
##
# Set this to on to use timestamping by default:
#timestamping = off
# It is a good idea to make Wget send your email address in a `From:'
# header with your request (so that server administrators can contact
# you in case of errors). Wget does *not* send `From:' by default.
#header = From: Your Name <username@site.domain>
# You can set up other headers, like Accept-Language. Accept-Language
# is *not* sent by default.
#header = Accept-Language: en
# You can set the default proxies for Wget to use for http, https, and ftp.
# They will override the value in the environment.
#https_proxy = http://proxy.yoyodyne.com:18023/
#http_proxy = http://proxy.yoyodyne.com:18023/
#ftp_proxy = http://proxy.yoyodyne.com:18023/
# If you do not want to use proxy at all, set this to off.
#use_proxy = on
# You can customize the retrieval outlook. Valid options are default,
# binary, mega and micro.
#dot_style = default
# Setting this to off makes Wget not download /robots.txt. Be sure to
# know *exactly* what /robots.txt is and how it is used before changing
# the default!
#robots = on
# It can be useful to make Wget wait between connections. Set this to
# the number of seconds you want Wget to wait.
#wait = 0
# You can force creating directory structure, even if a single is being
# retrieved, by setting this to on.
#dirstruct = off
# You can turn on recursive retrieving by default (don't do this if
# you are not sure you know what it means) by setting this to on.
#recursive = off
# To always back up file X as X.orig before converting its links (due
# to -k / --convert-links / convert_links = on having been specified),
# set this variable to on:
#backup_converted = off
# To have Wget follow FTP links from HTML files by default, set this
# to on:
#follow_ftp = off
# To try ipv6 addresses first:
prefer-family = IPv4
# Force the default system encoding
#locale = UTF-8
# Force the default remote server encoding
#remoteencoding = UTF-8
# default root certs location
ca_certificate=/etc/ssl/certs/ca-certificates.crt
et yaourt :
Code : Tout sélectionner
yaourt -S jdownloader
==> Téléchargement du PKGBUILD de jdownloader depuis AUR...
x jdownloader.desktop
x PKGBUILD
x jdownloader.install
Comment by: VuDu on Fri, 09 Jul 2010 09:48:01 +0000
And that's the way it should be.
It's the user's choice to decide if they want to use openjdk or jre/jdk. java-runtime is the metapackage for that.
Comment by: karol_007 on Fri, 09 Jul 2010 13:32:59 +0000
Ah, OK then.
Comment by: igallart on Sun, 12 Sep 2010 11:13:29 +0000
¿Why not is in the repos?
Comment by: karol_007 on Sun, 12 Sep 2010 11:23:24 +0000
@ igallart
https://bbs.archlinux.org/viewtopic.php?id=102356 ?
Comment by: nico007.ar on Wed, 16 Feb 2011 01:51:17 +0000
Funciona correctamente y lo considero un programa imprescindible. Creo que deberia estar en los repositorios oficiales.
Comment by: punkrockguy318 on Thu, 21 Apr 2011 02:11:39 +0000
source=('http://212.117.163.148/jd.sh'
:/ Is there a cleaner way to do this than fetching the start-up script from an arbitrary website?
JDownloader should just include the script in their tarbells
First Submitted: Sat, 15 Aug 2009 20:53:58 +0000
jdownloader latest-14
( Paquet non supporté : peut être dangereux ! )
==> Éditer PKGBUILD ? [O/n] ("A" pour annuler)
==> ------------------------------------------
==> n
==> Dépendances de jdownloader :
- java-runtime>=1.5 (déjà installé)
- wget (déjà installé)
- bash (déjà installé)
==> Éditer jdownloader.install ? [O/n] ("A" pour annuler)
==> -----------------------------------------------------
==> n
==> Lancer la compilation de jdownloader ? [O/n]
==> --------------------------------------------
==>
==> Construction et installation du paquet
==> Création du paquet jdownloader latest-14 (sam. mai 28 04:28:03 CEST 2011)
==> Vérification des dépendances pour l'exécution...
==> Vérification des dépendances pour la compilation...
==> Récupération des sources...
-> Téléchargement de jd.sh...
--2011-05-28 04:28:03-- http://212.117.163.148/jd.sh
Connexion vers 212.117.163.148:80...connecté.
requête HTTP transmise, en attente de la réponse...200 OK
Longueur: 1592 (1,6K) [application/octet-stream]
Sauvegarde en : «jd.sh.part»
100%[=====================================>] 1 592 --.-K/s ds 0s
2011-05-28 04:28:03 (163 MB/s) - «jd.sh.part» sauvegardé [1592/1592]
-> Téléchargement de jdownloader.png...
--2011-05-28 04:28:03-- http://jdownloader.org/_media/knowledge/wiki/jdownloader.png?w=128&h=128
Résolution de jdownloader.org... échec: Nom ou service inconnu.
wget : impossible de résoudre l'adresse de l'hôte «jdownloader.org»
==> ERREUR: Erreur lors du téléchargement de jdownloader.png
Abandon...
==> ERREUR: Makepkg n'a pas pu construire jdownloader.
==> Relancer la compilation de jdownloader ? [o/N]
est-ce qu'il faudrait que je reboot ?
(ceci dit, est-ce vraiment résolu ? ... c'est une rustine... au mieux: on a finit par isoler ce qui coince, mais pas pourquoi... peut-être du côté de ta box ? 