Re: [catalyst]ecran blanc pilote propriétaire ati (RESOLU)
Re: [catalyst]ecran blanc pilote propriétaire ati (RESOLU)
bonjour (je suis un gros debutant mais j'aime bien archlinux ) j'ai un probleme avec les pilote propriétaire ati(catalyst11.6-1) j'ai une carte ATI Radeaon HD5670 j'ai suis vis le tuto http://wiki.archlinux.fr/ATI#Catalyst fais les mise a jours . Au lancement de xorg j'ai un ecran tout blanc . Je voudrai change la version de catalyst pour teste si sais la derniere version qui plante mais je ne sais pas comment fais
Dernière modification par dieujack le jeu. 04 août 2011, 14:19, modifié 2 fois.
-
benjarobin
- Maître du Kyudo
- Messages : 17600
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Bonjour à toi,
Tout d'abord pourrait tu donner les log de Xorg contenu dans /var/log/
Tu peux soit mettre ce fichier sur une clé USB, soit si tu es connecté au réseau d'utiliser le script pastebin d'archlinux. Voir le forum et/ou le wiki pour plus de détails.
De plus comment tu lances Xorg, je te conseil de tester ce qui est proposé dans le wiki Xorg. Il faut bien sûre faire ces opérations avec ton utilisateur et non en root et que celui-ci appartienne aux bons groupes
Tout d'abord pourrait tu donner les log de Xorg contenu dans /var/log/
Tu peux soit mettre ce fichier sur une clé USB, soit si tu es connecté au réseau d'utiliser le script pastebin d'archlinux. Voir le forum et/ou le wiki pour plus de détails.
De plus comment tu lances Xorg, je te conseil de tester ce qui est proposé dans le wiki Xorg. Il faut bien sûre faire ces opérations avec ton utilisateur et non en root et que celui-ci appartienne aux bons groupes
Zsh | KDE | PC fixe : AMD Ryzen 9900X, Radeon RX 7700 XT
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
je mais que la fin sa vous va ?
j'ai suis vis le tuto a la lettre les pilote libre marche tres bien mais j'ai pas la 3D sais pour sa que vouler les pilote propiétaire
Code : Tout sélectionner
[ 7757.106] ukiDynamicMajor: found major device number 251
[ 7757.106] ukiDynamicMajor: found major device number 251
[ 7757.106] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 7757.106] ukiOpenDevice: node name is /dev/ati/card0
[ 7757.106] ukiOpenDevice: open result is 15, (OK)
[ 7757.106] ukiOpenByBusid: ukiOpenMinor returns 15
[ 7757.106] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 7757.106] (II) fglrx(0): [uki] DRM interface version 1.0
[ 7757.106] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 7757.106] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 7757.106] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb73dd000
[ 7757.106] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 7757.106] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 7757.106] (II) fglrx(0): swlDriScreenInit done
[ 7757.106] (II) fglrx(0): Kernel Module Version Information:
[ 7757.106] (II) fglrx(0): Name: fglrx
[ 7757.106] (II) fglrx(0): Version: 8.86.5
[ 7757.106] (II) fglrx(0): Date: May 24 2011
[ 7757.106] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 7757.106] (II) fglrx(0): Kernel Module version matches driver.
[ 7757.106] (II) fglrx(0): Kernel Module Build Time Information:
[ 7757.106] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.39-ARCH
[ 7757.106] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 7757.106] (II) fglrx(0): Build-Kernel __SMP__: no
[ 7757.106] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 7757.106] (II) fglrx(0): [uki] register handle = 0x00004000
[ 7757.117] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
[ 7757.117] (II) fglrx(0): Shutdown CMMQS
[ 7757.117] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 7757.117] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0xb73dd000
[ 7757.117] (WW) fglrx(0): ***********************************************************
[ 7757.117] (WW) fglrx(0): * DRI initialization failed *
[ 7757.117] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 7757.117] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 7757.117] (WW) fglrx(0): ***********************************************************
[ 7757.117]
Fatal server error:
[ 7757.117] AddScreen/ScreenInit failed for driver 0
[ 7757.117]
[ 7757.117]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 7757.117] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 7757.117]
-
FoolEcho
- Maître du Kyudo
- Messages : 10711
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Ben... un gros effort sur la syntaxe ne serait pas du luxe.dieujack a écrit :je mais que la fin sa vous va ?
Le log complet serait nettement mieux, stp, même si le problème semble venir de là:
(et merci de répondre aux autres questions poséesdieujack a écrit :Code : Tout sélectionner
[ 7757.117] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
)«The following statement is not true. The previous statement is true.» 
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
le code entrier
je lance xorg en faisant startx (mais j'utilise wmii donc j'ai modifier xinitrc)
Code : Tout sélectionner
[ 7756.593]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 7756.594] X Protocol Version 11, Revision 0
[ 7756.595] Build Operating System: Linux 2.6.39-ARCH i686
[ 7756.595] Current Operating System: Linux myhost 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 7756.596] Kernel command line: root=/dev/sda7 ro
[ 7756.596] Build Date: 09 July 2011 07:57:07AM
[ 7756.597]
[ 7756.597] Current version of pixman: 0.22.2
[ 7756.598] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7756.599] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7756.602] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 28 12:25:22 2011
[ 7756.602] (==) Using config file: "/etc/X11/xorg.conf"
[ 7756.603] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7756.604] (==) ServerLayout "X.org Configured"
[ 7756.604] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 7756.604] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 7756.604] (**) | |-->Device "aticonfig-Device[0]-0"
[ 7756.604] (**) |-->Input Device "Mouse0"
[ 7756.604] (**) |-->Input Device "Keyboard0"
[ 7756.604] (==) Automatically adding devices
[ 7756.604] (==) Automatically enabling devices
[ 7756.605] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 7756.605] Entry deleted from font path.
[ 7756.605] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 7756.605] Entry deleted from font path.
[ 7756.605] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7756.605] Entry deleted from font path.
[ 7756.605] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 7756.605] Entry deleted from font path.
[ 7756.605] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 7756.605] Entry deleted from font path.
[ 7756.605] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7756.605] Entry deleted from font path.
[ 7756.605] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 7756.605] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 7756.605] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 7756.605] (WW) Disabling Mouse0
[ 7756.605] (WW) Disabling Keyboard0
[ 7756.605] (II) Loader magic: 0x822e1a0
[ 7756.605] (II) Module ABI versions:
[ 7756.605] X.Org ANSI C Emulation: 0.4
[ 7756.605] X.Org Video Driver: 10.0
[ 7756.605] X.Org XInput driver : 12.2
[ 7756.605] X.Org Server Extension : 5.0
[ 7756.605] (--) PCI:*(0:1:0:0) 1002:68d8:174b:e152 rev 0, Mem @ 0xd0000000/268435456, 0xfeae0000/131072, I/O @ 0x$
[ 7756.606] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 7756.606] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 7756.606] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 7756.606] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 7756.606] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 7756.606] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 7756.606] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 7756.606] (II) LoadModule: "extmod"
[ 7756.606] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 7756.606] (II) Module extmod: vendor="X.Org Foundation"
[ 7756.606] compiled for 1.10.3, module version = 1.0.0
[ 7756.606] Module class: X.Org Server Extension
[ 7756.606] ABI class: X.Org Server Extension, version 5.0
[ 7756.606] (II) Loading extension MIT-SCREEN-SAVER
[ 7756.606] (II) Loading extension XFree86-VidModeExtension
[ 7756.606] (II) Loading extension XFree86-DGA
[ 7756.606] (II) Loading extension DPMS
[ 7756.606] (II) Loading extension XVideo
[ 7756.606] (II) Loading extension XVideo-MotionCompensation
[ 7756.606] (II) Loading extension X-Resource
[ 7756.606] (II) LoadModule: "glx"
[ 7756.606] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7756.606] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 7756.606] compiled for 6.9.0, module version = 1.0.0
[ 7756.606] (II) Loading extension GLX
[ 7756.606] (II) LoadModule: "record"
[ 7756.606] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 7756.607] (II) Module record: vendor="X.Org Foundation"
[ 7756.607] compiled for 1.10.3, module version = 1.13.0
[ 7756.607] Module class: X.Org Server Extension
[ 7756.607] ABI class: X.Org Server Extension, version 5.0
[ 7756.607] (II) Loading extension RECORD
[ 7756.607] (II) LoadModule: "dri"
[ 7756.607] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 7756.607] (II) Module dri: vendor="X.Org Foundation"
[ 7756.607] compiled for 1.10.3, module version = 1.0.0
[[ 7756.607] ABI class: X.Org Server Extension, version 5.0
[ 7756.607] (II) Loading extension XFree86-DRI
[ 7756.607] (II) LoadModule: "dri2"
[ 7756.607] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 7756.607] (II) Module dri2: vendor="X.Org Foundation"
[ 7756.607] compiled for 1.10.3, module version = 1.2.0
[ 7756.607] ABI class: X.Org Server Extension, version 5.0
[ 7756.607] (II) Loading extension DRI2
[ 7756.607] (II) LoadModule: "dbe"
[ 7756.607] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 7756.607] (II) Module dbe: vendor="X.Org Foundation"
[ 7756.607] compiled for 1.10.3, module version = 1.0.0
[ 7756.607] Module class: X.Org Server Extension
[ 7756.607] ABI class: X.Org Server Extension, version 5.0
[ 7756.607] (II) Loading extension DOUBLE-BUFFER
[ 7756.607] (II) LoadModule: "fglrx"
[ 7756.607] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 7756.622] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 7756.622] compiled for 1.4.99.906, module version = 8.86.5
[ 7756.622] Module class: X.Org Video Driver
[ 7756.622] (II) Loading sub module "fglrxdrm"
[ 7756.622] (II) LoadModule: "fglrxdrm"
[ 7756.622] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 7756.622] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 7756.622] compiled for 1.4.99.906, module version = 8.86.5
[ 7756.622] (II) ATI Proprietary Linux Driver Version Identifier:8.86.5
[ 7756.622] (II) ATI Proprietary Linux Driver Release Identifier: 8.861
[ 7756.622] (II) ATI Proprietary Linux Driver Build Date: May 24 2011 22:46:44
[ 7756.622] (--) using VT number 7
[ 7756.627] (WW) Falling back to old probe method for fglrx
[ 7756.635] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 7756.636] (--) Chipset Supported AMD Graphics Processor (0x68D8) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 7756.636] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 7756.637] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 7756.637] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 7756.637] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 7756.637] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 7756.637] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 7756.637] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 7756.637] (II) AMD Video driver is signed
[ 7756.637] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 7756.637] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 7756.637] (II) fglrx(0): pEnt->device->identifier=0x9dae230
[ 7756.637] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 7756.637] (II) Loading sub module "vgahw"
[ 7756.637] (II) LoadModule: "vgahw"
[ 7756.637] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 7756.660] (II) Module vgahw: vendor="X.Org Foundation"
[ 7756.660] compiled for 1.10.3, module version = 0.1.0
[ 7756.660] ABI class: X.Org Video Driver, version 10.0
[ 7756.660] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 7756.660] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 7756.660] (==) fglrx(0): Default visual is TrueColor
[ 7756.660] (**) fglrx(0): Option "DPMS" "true"
[ 7756.661] (==) fglrx(0): RGB weight 888
[ 7756.661] (II) fglrx(0): Using 8 bits per RGB
[ 7756.661] (==) fglrx(0): Buffer Tiling is ON
[ 7756.661] (II) Loading sub module "fglrxdrm"
[ 7756.661] (II) LoadModule: "fglrxdrm"
[ 7756.661] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 7756.661] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 7756.661] compiled for 1.4.99.906, module version = 8.86.5
[ 7756.662] ukiDynamicMajor: found major device number 251
[ 7756.662] ukiDynamicMajor: found major device number 251
[ 7756.662] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 7756.662] ukiOpenDevice: node name is /dev/ati/card0
[ 7756.662] ukiOpenDevice: open result is 10, (OK)
[ 7756.662] ukiOpenByBusid: ukiOpenMinor returns 10
[ 7756.662] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 7756.662] (==) fglrx(0): NoAccel = NO
[ 7756.662] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 7756.662] (--) fglrx(0): Chipset: "ATI Radeon HD 5670" (Chipset = 0x68d8)
[ 7756.662] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe152)
[ 7756.662] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 7756.662] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 7756.662] (--) fglrx(0): MMIO registers at 0xfeae0000
[ 7756.662] (--) fglrx(0): I/O port at 0x0000d000
[ 7756.662] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 7756.739] (II) fglrx(0): AC Adapter is used
[ 7756.747] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 7756.944] (II) Loading sub module "vbe"
[ 7756.944] (II) LoadModule: "vbe"
[ 7756.944] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 7756.947] (II) Module vbe: vendor="X.Org Foundation"
[ 7756.947] compiled for 1.10.3, module version = 1.1.0
[ 7756.947] ABI class: X.Org Video Driver, version 10.0
[ 7756.947] (II) fglrx(0): VESA BIOS detected
[ 7756.947] (II) fglrx(0): VESA VBE Version 3.0
[ 7756.947] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 7756.947] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 7756.947] (II) fglrx(0): VESA VBE OEM Software Rev: 12.18
[ 7756.947] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 7756.947] (II) fglrx(0): VESA VBE OEM Product: 2
[ 7756.947] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 7756.986] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 7756.986] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[ 7756.986] (II) fglrx(0): PCIE card detected
[ 7756.986] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 7756.986] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 7756.989] (II) fglrx(0): Using adapter: 1:0.0.
[ 7757.019] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 7757.022] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[ 7757.022] (II) fglrx(0): RandR 1.2 support is enabled!
[ 7757.022] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 7757.022] (==) fglrx(0): Center Mode is disabled
[ 7757.022] (II) Loading sub module "fb"
[ 7757.022] (II) LoadModule: "fb"
[ 7757.022] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7757.023] (II) Module fb: vendor="X.Org Foundation"
[ 7757.023] compiled for 1.10.3, module version = 1.0.0
[ 7757.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7757.023] (II) Loading sub module "ddc"
[ 7757.023] (II) LoadModule: "ddc"
[ 7757.023] (II) Module "ddc" already built-in
[ 7757.095] (II) fglrx(0): Finished Initialize PPLIB!
[ 7757.095] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 7757.095] (II) fglrx(0): Output DFP2 has no monitor section
[ 7757.095] (II) fglrx(0): Output CRT1 has no monitor section
[ 7757.095] (II) fglrx(0): Output CRT2 has no monitor section
[ 7757.095] (II) Loading sub module "ddc"
[ 7757.095] (II) LoadModule: "ddc"
[ 7757.095] (II) Module "ddc" already built-in
[ 7757.095] (II) fglrx(0): Connected Display0: CRT2
[ 7757.095] (II) fglrx(0): Display0 EDID data ---------------------------
[ 7757.095] (II) fglrx(0): Manufacturer: ACI Model: 19d5 Serial#: 139233
[ 7757.095] (II) fglrx(0): Year: 2009 Week: 39
[ 7757.095] (II) fglrx(0): EDID Version: 1.3
[ 7757.095] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 7757.095] (II) fglrx(0): Sync: Separate
[ 7757.095] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 7757.095] (II) fglrx(0): Gamma: 2.20
[ 7757.095] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 7757.095] (II) fglrx(0): First detailed timing is preferred mode
[ 7757.095] (II) fglrx(0): redX: 0.650 redY: 0.340 greenX: 0.290 greenY: 0.610
[ 7757.095] (II) fglrx(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 7757.095] (II) fglrx(0): Supported established timings:
[ 7757.095] (II) fglrx(0): 720x400@70Hz
[ 7757.095] (II) fglrx(0): 640x480@60Hz
[ 7757.095] (II) fglrx(0): 640x480@67Hz
[ 7757.095] (II) fglrx(0): 640x480@72Hz
[ 7757.095] (II) fglrx(0): 640x480@75Hz
[ 7757.095] (II) fglrx(0): 800x600@56Hz
[ 7757.095] (II) fglrx(0): 800x600@60Hz
[ 7757.095] (II) fglrx(0): 800x600@72Hz
[ 7757.095] (II) fglrx(0): 800x600@75Hz
[ 7757.095] (II) fglrx(0): 832x624@75Hz
[ 7757.095] (II) fglrx(0): 1024x768@60Hz
[ 7757.095] (II) fglrx(0): 1024x768@70Hz
[ 7757.095] (II) fglrx(0): 1024x768@75Hz
[ 7757.095] (II) fglrx(0): 1280x1024@75Hz
[ 7757.095] (II) fglrx(0): 1152x864@75Hz
[ 7757.095] (II) fglrx(0): Manufacturer's mask: 0
[ 7757.095] (II) fglrx(0): Supported standard timings:
[ 7757.095] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 7757.095] (II) fglrx(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7757.095] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 7757.095] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7757.095] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7757.095] (II) fglrx(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7757.095] (II) fglrx(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 7757.095] (II) fglrx(0): Supported detailed timing:
[ 7757.095] (II) fglrx(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 7757.095] (II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 7757.095] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 7757.095] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 7757.095] (II) fglrx(0): Monitor name: ASUS VW193D
[ 7757.095] (II) fglrx(0): Serial No: 99LMTF139233
[ 7757.095] (II) fglrx(0): EDID (in hex):
[ 7757.095] (II) fglrx(0): 00ffffffffffff000469d519e11f0200
[ 7757.095] (II) fglrx(0): 2713010308291a78ea8585a6574a9c26
[ 7757.095] (II) fglrx(0): 125054bfef80714f8100810f81408180
[ 7757.095] (II) fglrx(0): 9500950f01019a29a0d0518422305098
[ 7757.095] (II) fglrx(0): 360098ff1000001c000000fd00374b1e
[ 7757.096] (II) fglrx(0): 530f000a202020202020000000fc0041
[ 7757.096] (II) fglrx(0): 535553205657313933440a20000000ff
[ 7757.096] (II) fglrx(0): 0039394c4d54463133393233330a0002
[ 7757.096] (II) fglrx(0): End of Display0 EDID data --------------------
[ 7757.104] (II) fglrx(0): EDID for output DFP1
[ 7757.104] (II) fglrx(0): EDID for output DFP2
[ 7757.104] (II) fglrx(0): EDID for output CRT1
[ 7757.104] (II) fglrx(0): EDID for output CRT2
[ 7757.104] (II) fglrx(0): Manufacturer: ACI Model: 19d5 Serial#: 139233
[ 7757.104] (II) fglrx(0): Year: 2009 Week: 39
[ 7757.104] (II) fglrx(0): EDID Version: 1.3
[ 7757.104] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 7757.104] (II) fglrx(0): Sync: Separate
[ 7757.104] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 7757.105] (II) fglrx(0): Gamma: 2.20
[ 7757.105] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 7757.105] (II) fglrx(0): First detailed timing is preferred mode
[ 7757.105] (II) fglrx(0): redX: 0.650 redY: 0.340 greenX: 0.290 greenY: 0.610
[ 7757.105] (II) fglrx(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 7757.105] (II) fglrx(0): Supported established timings:
[ 7757.105] (II) fglrx(0): 720x400@70Hz
[ 7757.105] (II) fglrx(0): 640x480@60Hz
[ 7757.105] (II) fglrx(0): 640x480@67Hz
[ 7757.105] (II) fglrx(0): 640x480@72Hz
[ 7757.105] (II) fglrx(0): 640x480@75Hz
[ 7757.105] (II) fglrx(0): 800x600@56Hz
[ 7757.105] (II) fglrx(0): 800x600@60Hz
[ 7757.105] (II) fglrx(0): 800x600@72Hz
[ 7757.105] (II) fglrx(0): 800x600@75Hz
[ 7757.105] (II) fglrx(0): 832x624@75Hz
[ 7757.105] (II) fglrx(0): 1024x768@60Hz
[ 7757.105] (II) fglrx(0): 1024x768@70Hz
[ 7757.105] (II) fglrx(0): 1024x768@75Hz
[ 7757.105] (II) fglrx(0): 1280x1024@75Hz
[ 7757.105] (II) fglrx(0): 1152x864@75Hz
[ 7757.105] (II) fglrx(0): Manufacturer's mask: 0
[ 7757.105] (II) fglrx(0): Supported standard timings:
[ 7757.105] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 7757.105] (II) fglrx(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7757.105] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 7757.105] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7757.105] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7757.105] (II) fglrx(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7757.105] (II) fglrx(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 7757.105] (II) fglrx(0): Supported detailed timing:
[ 7757.105] (II) fglrx(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 7757.105] (II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 7757.105] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 7757.105] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 7757.105] (II) fglrx(0): Monitor name: ASUS VW193D
[ 7757.105] (II) fglrx(0): Serial No: 99LMTF139233
[ 7757.105] (II) fglrx(0): EDID (in hex):
[ 7757.105] (II) fglrx(0): 00ffffffffffff000469d519e11f0200
[ 7757.105] (II) fglrx(0): 2713010308291a78ea8585a6574a9c26
[ 7757.105] (II) fglrx(0): 125054bfef80714f8100810f81408180
[ 7757.105] (II) fglrx(0): 9500950f01019a29a0d0518422305098
[ 7757.105] (II) fglrx(0): 360098ff1000001c000000fd00374b1e
[ 7757.105] (II) fglrx(0): 530f000a202020202020000000fc0041
[ 7757.105] (II) fglrx(0): 535553205657313933440a20000000ff
[ 7757.105] (II) fglrx(0): 0039394c4d54463133393233330a0002
[ 7757.105] (II) fglrx(0): Printing probed modes for output CRT2
[ 7757.105] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55$
[ 7757.105] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsyn$
[ 7757.105] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsyn$
[ 7757.105] (II) fglrx(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70$
[ 7757.105] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (6$
[ 7757.105] (II) fglrx(0): Modeline "1280x800"x75.0 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62$
[ 7757.105] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49$
[ 7757.105] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67$
[ 7757.105] (II) fglrx(0): Modeline "1152x864"x60.0 106.50 1152 1520 1672 1904 864 903 909 934 -hsync +vsync (55$
[ 7757.105] (II) fglrx(0): Modeline "1280x768"x75.0 106.50 1280 1360 1488 1696 768 803 809 838 -hsync +vsync (62$
[ 7757.105] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49$
[ 7757.105] (II) fglrx(0): Modeline "1280x720"x75.0 106.50 1280 1360 1488 1696 720 803 809 838 -hsync +vsync (62$
[ 7757.105] (II) fglrx(0): Modeline "1280x720"x60.0 83.50 1280 1352 1480 1680 720 803 809 831 -hsync +vsync (49$
[ 7757.105] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60$
[ 7757.105] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56$
[ 7757.105] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48$
[ 7757.105] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 k$
[ 7757.105] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 k$
[ 7757.105] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 k$
[ 7757.105] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 k$
[ 7757.105] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kH$
[ 7757.105] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kH$
[ 7757.105] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kH$
[ 7757.105] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kH$
[ 7757.105] (II) fglrx(0): Output DFP1 disconnected
[ 7757.105] (II) fglrx(0): Output DFP2 disconnected
[ 7757.105] (II) fglrx(0): Output CRT1 disconnected
[ 7757.105] (II) fglrx(0): Output CRT2 connected
[ 7757.105] (II) fglrx(0): Using exact sizes for initial modes
[ 7757.105] (II) fglrx(0): Output CRT2 using initial mode 1440x900
[ 7757.105] (II) fglrx(0): DPI set to (96, 96)
[ 7757.105] (II) fglrx(0): Adapter ATI Radeon HD 5670 has 2 configurable heads and 1 displays connected.
[ 7757.105] (==) fglrx(0): PseudoColor visuals disabled
[ 7757.105] (II) Loading sub module "ramdac"
[ 7757.105] (II) LoadModule: "ramdac"
[ 7757.105] (II) Module "ramdac" already built-in
[ 7757.105] (==) fglrx(0): NoDRI = NO
[ 7757.105] (==) fglrx(0): Capabilities: 0x00000000
[ 7757.105] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 7757.105] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 7757.105] (==) fglrx(0): UseFastTLS=0
[ 7757.105] (==) fglrx(0): BlockSignalsOnLock=1
[ 7757.105] (--) Depth 24 pixmap format is 32 bpp
[ 7757.106] (II) Loading extension ATIFGLRXDRI
[ 7757.106] (II) fglrx(0): doing swlDriScreenInit
[ 7757.106] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 7757.106] ukiDynamicMajor: found major device number 251
[ 7757.106] ukiDynamicMajor: found major device number 251
[ 7757.106] ukiDynamicMajor: found major device number 251
[ 7757.106] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 7757.106] ukiOpenDevice: node name is /dev/ati/card0
[ 7757.106] ukiOpenDevice: open result is 15, (OK)
[ 7757.106] ukiOpenByBusid: ukiOpenMinor returns 15
[ 7757.106] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 7757.106] (II) fglrx(0): [uki] DRM interface version 1.0
[ 7757.106] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 7757.106] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 7757.106] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb73dd000
[ 7757.106] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 7757.106] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 7757.106] (II) fglrx(0): swlDriScreenInit done
[ 7757.106] (II) fglrx(0): Kernel Module Version Information:
[ 7757.106] (II) fglrx(0): Name: fglrx
[ 7757.106] (II) fglrx(0): Version: 8.86.5
[ 7757.106] (II) fglrx(0): Date: May 24 2011
[ 7757.106] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 7757.106] (II) fglrx(0): Kernel Module version matches driver.
[ 7757.106] (II) fglrx(0): Kernel Module Build Time Information:
[ 7757.106] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.39-ARCH
[ 7757.106] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 7757.106] (II) fglrx(0): Build-Kernel __SMP__: no
[ 7757.106] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 7757.106] (II) fglrx(0): [uki] register handle = 0x00004000
[ 7757.117] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
[ 7757.117] (II) fglrx(0): Shutdown CMMQS
[ 7757.117] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 7757.117] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0xb73dd000
[ 7757.117] (WW) fglrx(0): ***********************************************************
[ 7757.117] (WW) fglrx(0): * DRI initialization failed *
[ 7757.117] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 7757.117] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 7757.117] (WW) fglrx(0): ***********************************************************
[ 7757.117]
Fatal server error:
[ 7757.117] AddScreen/ScreenInit failed for driver 0
[ 7757.117]
[ 7757.117]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 7757.117] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 7757.117]
-
Desintegr
- Chu Ko Nu
- Messages : 354
- Inscription : jeu. 28 avr. 2011, 16:42
- Localisation : Orléans - France
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Fais un effort sur la rédaction de tes messages, tu fais presque une faute par mot...
Que renvoie les commandes :
Que renvoie les commandes :
Code : Tout sélectionner
dmesgCode : Tout sélectionner
lsmodCode : Tout sélectionner
modprobe fglxrRe: [catalyst]ecran blanc pilote propriétaire ati(non resolu
excuse moi pour les fautes . La commande dmesg renvoie plien de truc et lsmod aussi, mais je ne sais pas enregistres sur le shell et plus pour teste je suis obliger de quitte xorg d'installer les pilots catalyst (gros debutant excuse moi)
-
Desintegr
- Chu Ko Nu
- Messages : 354
- Inscription : jeu. 28 avr. 2011, 16:42
- Localisation : Orléans - France
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Si tu ne fais pas d'efforts sur la rédaction, je ne t'aiderai pas plus.
Relis toi, corrige tes fautes, aère ton texte et utilise la ponctuation.
Tu peux enregistrer le résultat d'une commande dans un fichier en utilisant les redirections des entrées/sorties.
C'est expliqué sur cette page au point 6.3 Redirection des entrées sorties : http://www.lmd.ens.fr/Ressources-Info/U ... nix-6.html
Relis toi, corrige tes fautes, aère ton texte et utilise la ponctuation.
Tu peux enregistrer le résultat d'une commande dans un fichier en utilisant les redirections des entrées/sorties.
C'est expliqué sur cette page au point 6.3 Redirection des entrées sorties : http://www.lmd.ens.fr/Ressources-Info/U ... nix-6.html
-
FoolEcho
- Maître du Kyudo
- Messages : 10711
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Par exemple (pareil pour les autres):dieujack a écrit :mais je ne sais pas enregistres sur le shell et plus pour teste je suis obliger de quitte xorg d'installer les pilots catalyst
Code : Tout sélectionner
dmesg &> dmesg.log
).... grillé...
«The following statement is not true. The previous statement is true.»
-
benjarobin
- Maître du Kyudo
- Messages : 17600
- Inscription : sam. 30 mai 2009, 15:48
- Localisation : Lyon
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
... S'excuser n'est pas une raison pour se relire au moins une fois. Je prends juste l'exemple dedieujack a écrit :excuse moi pour les fautes
dans ta phrase, car c'est une faute qui est au moins détectée par tous les correcteurs orthographiques même les plus mauvais. Personnellement je sais que je fais beaucoup de fautes, mais j'essaye toujours de me relire au moins une fois, mais pour toi le mot beaucoup est un euphémismedieujack a écrit :plien
Zsh | KDE | PC fixe : AMD Ryzen 9900X, Radeon RX 7700 XT
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Titre d'un sujet : [Thème] Sujet (état) / Règles du forum
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
ok je vais faire attention, mais je vais prendre plus de temps
-
FoolEcho
- Maître du Kyudo
- Messages : 10711
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
[HorsSujet]
[/HorsSujet]
Puor ce gnree de feauts, c'est nolaremenmt pas torp mnhaéct, un ceearvu huatbié à une lgunae dreiavt pvooiur rerile snas trop de pniee, pvuoru que la peirmrèe et la dernière ltrete ne cghnae pas de potosiin... ou pas.benjarobin a écrit :dans ta phrase, car c'est une faute qui est au moins détectée par tous les correcteurs orthographiques même les plus mauvais. Personnellement je sais que je fais beaucoup de fautes, mais j'essaye toujours de me relire au moins une fois, mais pour toi le mot beaucoup est un euphémismedieujack a écrit : plien
On a le temps: comprends que si on se casse déjà la tête à déchiffrer ce que tu dis, on est nettement moins concentré sur le reste (en admettant qu'on n'abandonne pas la lecture avant...). Comme disait l'autre: «écoute, c'que j'te demande, c'est pas de cogner dur, c'est de cogner juste.»dieujack a écrit :ok je vais faire attention, mais je vais prendre plus de temps
[/HorsSujet]
«The following statement is not true. The previous statement is true.»
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Alors voilà, la commande :
renvoi
la commande :
renvoi
la commande (après installation de : catalyst, catalyst-utils) :
ne renvoi rien .
Code : Tout sélectionner
dmesgCode : Tout sélectionner
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A780LM-S, BIOS P1.00 08/28/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fd87000 - 7ffa0000
[ 0.000000] Allocated new RAMDISK: 375e5000 - 377fd337
[ 0.000000] Move RAMDISK from 000000007fd87000 - 000000007ff9f336 to 375e5000 - 377fd336
[ 0.000000] ACPI: RSDP 000fb320 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ffb0000 0003C (v01 082809 RSDT1709 20090828 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ffb0200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110316/tbfadt-560)
[ 0.000000] ACPI: DSDT 7ffb0450 08783 (v01 AS262 AS262017 00000017 INTL 20051117)
[ 0.000000] ACPI: FACS 7ffc0000 00040
[ 0.000000] ACPI: APIC 7ffb0390 0007C (v01 082809 APIC1709 20090828 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffb0410 0003C (v01 082809 OEMMCFG 20090828 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ffc0040 00072 (v01 082809 OEMB1709 20090828 MSFT 00000097)
[ 0.000000] ACPI: AAFT 7ffba450 00027 (v01 082809 OEMAAFT 20090828 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ffba480 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffb0
[ 0.000000] On node 0 totalpages: 524095
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294562 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
[ 0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u524288
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
[ 0.000000] Kernel command line: root=/dev/sda7 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8387072 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffb0)
[ 0.000000] Memory: 2062272k/2096832k available (3376k kernel code, 34108k reserved, 1390k data, 512k init, 1187528k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2893.844 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 5790.84 BogoMIPS (lpj=9646146)
[ 0.003423] pid_max: default: 32768 minimum: 301
[ 0.003499] Security Framework initialized
[ 0.003543] AppArmor: AppArmor disabled by boot time parameter
[ 0.003609] Mount-cache hash table entries: 512
[ 0.003824] Initializing cgroup subsys ns
[ 0.003867] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003916] Initializing cgroup subsys cpuacct
[ 0.003968] Initializing cgroup subsys memory
[ 0.004017] Initializing cgroup subsys devices
[ 0.004059] Initializing cgroup subsys freezer
[ 0.004102] Initializing cgroup subsys net_cls
[ 0.004144] Initializing cgroup subsys blkio
[ 0.004213] CPU: Physical Processor ID: 0
[ 0.004255] CPU: Processor Core ID: 0
[ 0.004297] mce: CPU supports 6 MCE banks
[ 0.005247] ACPI: Core revision 20110316
[ 0.010009] ftrace: allocating 15225 entries in 30 pages
[ 0.013407] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013752] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047718] CPU0: AMD Athlon(tm) II X2 245 Processor stepping 02
[ 0.049997] Performance Events: AMD PMU driver.
[ 0.049997] ... version: 0
[ 0.049997] ... bit width: 48
[ 0.049997] ... generic registers: 4
[ 0.049997] ... value mask: 0000ffffffffffff
[ 0.049997] ... max period: 00007fffffffffff
[ 0.049997] ... fixed-purpose events: 0
[ 0.049997] ... event mask: 000000000000000f
[ 0.066723] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.093368] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.093370] Booting Node 0, Processors #1
[ 0.093446] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.190016] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.196678] Brought up 2 CPUs
[ 0.196722] Total of 2 processors activated (11579.80 BogoMIPS).
[ 0.197109] devtmpfs: initialized
[ 0.197109] PM: Registering ACPI NVS region at 7ffc0000 (196608 bytes)
[ 0.197439] print_constraints: dummy:
[ 0.197521] NET: Registered protocol family 16
[ 0.197618] node 0 link 0: io port [1000, ffffff]
[ 0.197621] TOM: 0000000080000000 aka 2048M
[ 0.197661] Fam 10h mmconf [e0000000, efffffff]
[ 0.197664] node 0 link 0: mmio [a0000, bffff]
[ 0.197666] node 0 link 0: mmio [80000000, dfffffff]
[ 0.197668] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.197670] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.197672] bus: [00, 07] on node 0 link 0
[ 0.197674] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.197676] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.197678] bus: 00 index 2 [mem 0x80000000-0xdfffffff]
[ 0.197679] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.197689] Extended Config Space enabled on 1 nodes
[ 0.197737] ACPI: bus type pci registered
[ 0.197838] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.197883] PCI: not using MMCONFIG
[ 0.198676] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.198717] PCI: Using configuration type 1 for base access
[ 0.198756] PCI: Using configuration type 1 for extended access
[ 0.199068] bio: create slab <bio-0> at 0
[ 0.200621] ACPI: EC: Look up EC in DSDT
[ 0.201562] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.210298] ACPI: Interpreter enabled
[ 0.210344] ACPI: (supports S0 S1 S4 S5)
[ 0.210534] ACPI: Using IOAPIC for interrupt routing
[ 0.210592] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.211324] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.211368] PCI: Using MMCONFIG for extended config space
[ 0.274048] ACPI: No dock devices found.
[ 0.274092] HEST: Table not found.
[ 0.274133] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.274321] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.274480] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.274522] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.274563] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.274607] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.274650] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
[ 0.274694] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.274749] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.274791] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.274816] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.274819] pci 0000:00:02.0: PME# disabled
[ 0.274833] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.274857] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.274860] pci 0000:00:05.0: PME# disabled
[ 0.274892] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.274914] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.274923] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.274932] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.274942] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.274951] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.274961] pci 0000:00:11.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.274981] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.275058] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.275071] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.275133] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.275146] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.275213] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.275232] pci 0000:00:12.2: reg 10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.275301] pci 0000:00:12.2: supports D1 D2
[ 0.275302] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.275306] pci 0000:00:12.2: PME# disabled
[ 0.275325] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.275338] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.275400] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.275413] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.275480] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.275499] pci 0000:00:13.2: reg 10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.275568] pci 0000:00:13.2: supports D1 D2
[ 0.275569] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.275573] pci 0000:00:13.2: PME# disabled
[ 0.275596] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.275686] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.275702] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.275711] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.275720] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.275729] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.275739] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.275786] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.275807] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.275864] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.275868] pci 0000:00:14.2: PME# disabled
[ 0.275880] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.275954] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.275992] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.276005] pci 0000:00:14.5: reg 10: [mem 0xfe9fa000-0xfe9fafff]
[ 0.276069] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.276082] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.276093] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.276103] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.276116] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.276160] pci 0000:01:00.0: [1002:68d8] type 0 class 0x000300
[ 0.276172] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.276182] pci 0000:01:00.0: reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
[ 0.276188] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.276200] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.276215] pci 0000:01:00.0: supports D1 D2
[ 0.276233] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[ 0.276244] pci 0000:01:00.1: reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
[ 0.276284] pci 0000:01:00.1: supports D1 D2
[ 0.280012] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.280060] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.280063] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.280067] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.280106] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.280120] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.280141] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.280154] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.280163] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
[ 0.280194] pci 0000:02:00.0: supports D1 D2
[ 0.280196] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.280199] pci 0000:02:00.0: PME# disabled
[ 0.286680] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.286727] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.286729] pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.286733] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.286797] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.287963] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.287967] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.287971] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.287974] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.287976] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.287978] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.287980] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.287981] pci 0000:00:14.4: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 0.287983] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.287995] pci_bus 0000:00: on NUMA node 0
[ 0.288000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.288186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.288211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.288249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.288381] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.288617] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.291649] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 0.292023] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.292395] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.292767] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.293138] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.293585] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.294029] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15)
[ 0.294367] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.294858] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.294903] vgaarb: loaded
[ 0.295001] PCI: Using ACPI for IRQ routing
[ 0.295041] PCI: pci_cache_line_size set to 64 bytes
[ 0.295106] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.295108] reserve RAM buffer: 000000007ffb0000 - 000000007fffffff
[ 0.295190] NetLabel: Initializing
[ 0.295229] NetLabel: domain hash size = 128
[ 0.295268] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295316] NetLabel: unlabeled traffic allowed by default
[ 0.299465] pnp: PnP ACPI init
[ 0.299523] ACPI: bus type pnp registered
[ 0.299659] pnp 00:00: [bus 00-ff]
[ 0.299662] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.299663] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.299665] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.299667] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.299669] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.299670] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.299672] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.299720] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.299781] pnp 00:01: [mem 0x00000000-0xffffffff disabled]
[ 0.299783] pnp 00:01: [mem 0x00000000-0xffffffff disabled]
[ 0.299822] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.299852] pnp 00:02: [dma 4]
[ 0.299853] pnp 00:02: [io 0x0000-0x000f]
[ 0.299855] pnp 00:02: [io 0x0081-0x0083]
[ 0.299858] pnp 00:02: [io 0x0087]
[ 0.299859] pnp 00:02: [io 0x0089-0x008b]
[ 0.299861] pnp 00:02: [io 0x008f]
[ 0.299862] pnp 00:02: [io 0x00c0-0x00df]
[ 0.299885] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.299892] pnp 00:03: [io 0x0070-0x0071]
[ 0.299901] pnp 00:03: [irq 8]
[ 0.299923] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.299928] pnp 00:04: [io 0x0061]
[ 0.299948] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.299953] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.299957] pnp 00:05: [irq 13]
[ 0.299993] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.300157] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.300177] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.300228] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.300229] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.300261] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.300303] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.300345] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.300433] pnp 00:08: [io 0x0010-0x001f]
[ 0.300434] pnp 00:08: [io 0x0022-0x003f]
[ 0.300436] pnp 00:08: [io 0x0062-0x0063]
[ 0.300437] pnp 00:08: [io 0x0065-0x006f]
[ 0.300439] pnp 00:08: [io 0x0072-0x007f]
[ 0.300440] pnp 00:08: [io 0x0080]
[ 0.300441] pnp 00:08: [io 0x0084-0x0086]
[ 0.300443] pnp 00:08: [io 0x0088]
[ 0.300444] pnp 00:08: [io 0x008c-0x008e]
[ 0.300445] pnp 00:08: [io 0x0090-0x009f]
[ 0.300447] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.300448] pnp 00:08: [io 0x00b1]
[ 0.300449] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.300451] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.300452] pnp 00:08: [io 0x040b]
[ 0.300453] pnp 00:08: [io 0x04d6]
[ 0.300454] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.300456] pnp 00:08: [io 0x0c14]
[ 0.300457] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.300458] pnp 00:08: [io 0x0c52]
[ 0.300460] pnp 00:08: [io 0x0c6c]
[ 0.300461] pnp 00:08: [io 0x0c6f]
[ 0.300462] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.300463] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.300465] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.300466] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.300468] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.300469] pnp 00:08: [io 0x0800-0x089f]
[ 0.300470] pnp 00:08: [io 0x0000-0xffffffff disabled]
[ 0.300472] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.300473] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.300475] pnp 00:08: [io 0x0900-0x090f]
[ 0.300476] pnp 00:08: [io 0x0910-0x091f]
[ 0.300477] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.300479] pnp 00:08: [io 0x0060-0x005f disabled]
[ 0.300480] pnp 00:08: [io 0x0064-0x0063 disabled]
[ 0.300482] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.300483] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.300544] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.300586] system 00:08: [io 0x040b] has been reserved
[ 0.300626] system 00:08: [io 0x04d6] has been reserved
[ 0.300666] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.300707] system 00:08: [io 0x0c14] has been reserved
[ 0.300748] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.300788] system 00:08: [io 0x0c52] has been reserved
[ 0.300829] system 00:08: [io 0x0c6c] has been reserved
[ 0.300869] system 00:08: [io 0x0c6f] has been reserved
[ 0.300910] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.300950] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.300993] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.301034] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.301074] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.301115] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.301156] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.301197] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.301238] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.301279] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.301320] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.301361] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.301402] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.301444] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.301680] pnp 00:09: [io 0x0378-0x037f]
[ 0.301681] pnp 00:09: [io 0x0778-0x077f]
[ 0.301685] pnp 00:09: [irq 7]
[ 0.301686] pnp 00:09: [dma 3]
[ 0.301786] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.301803] pnp 00:0a: [io 0x0060]
[ 0.301805] pnp 00:0a: [io 0x0064]
[ 0.301808] pnp 00:0a: [irq 1]
[ 0.301834] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.301861] pnp 00:0b: [irq 12]
[ 0.301888] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.302039] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.302042] pnp 00:0c: [irq 4]
[ 0.302044] pnp 00:0c: [dma 0 disabled]
[ 0.302092] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.302147] pnp 00:0d: [io 0x0000-0xffffffff disabled]
[ 0.302149] pnp 00:0d: [io 0x0280-0x028f]
[ 0.302151] pnp 00:0d: [io 0x0290-0x029f]
[ 0.302182] system 00:0d: [io 0x0280-0x028f] has been reserved
[ 0.302224] system 00:0d: [io 0x0290-0x029f] has been reserved
[ 0.302265] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.302288] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 0.302319] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.302361] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340121] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.340124] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.340126] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.340127] pnp 00:0f: [mem 0x00100000-0x7fffffff]
[ 0.340129] pnp 00:0f: [mem 0xfec00000-0xffffffff]
[ 0.340210] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.340255] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.340297] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.340338] system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.340380] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.340422] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.340497] pnp: PnP ACPI: found 16 devices
[ 0.340536] ACPI: ACPI bus type pnp unregistered
[ 0.376214] Switching to clocksource acpi_pm
[ 0.376296] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.376338] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.376380] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.376422] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.376467] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.376508] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.376555] pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.376255] Switched to NOHz mode on CPU #0
[ 0.376555] Switched to NOHz mode on CPU #1
[ 0.376555] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.376555] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.376555] pci 0000:00:14.4: bridge window [io disabled]
[ 0.376555] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.376555] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.376555] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.376555] pci 0000:00:02.0: setting latency timer to 64
[ 0.376555] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.376555] pci 0000:00:05.0: setting latency timer to 64
[ 0.376555] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.376555] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.376555] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.376555] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.376555] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.376555] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.376555] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.376555] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.376555] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.376555] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.376555] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.376555] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.376555] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.376555] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.376555] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.376555] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.376555] pci_bus 0000:03: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.376555] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.376555] NET: Registered protocol family 2
[ 0.376555] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.376555] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.376555] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376555] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.376555] TCP reno registered
[ 0.376555] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.376555] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.376555] NET: Registered protocol family 1
[ 0.533400] pci 0000:01:00.0: Boot video device
[ 0.533408] PCI: CLS 64 bytes, default 64
[ 0.533451] Unpacking initramfs...
[ 0.561538] Freeing initrd memory: 2148k freed
[ 0.562664] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 0.562706] apm: disabled - APM is not SMP safe.
[ 0.562847] audit: initializing netlink socket (disabled)
[ 0.562896] type=2000 audit(1311855956.559:1): initialized
[ 0.563411] highmem bounce pool size: 64 pages
[ 0.563457] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.565069] VFS: Disk quotas dquot_6.5.2
[ 0.565174] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.565295] msgmni has been set to 1712
[ 0.565555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.565663] io scheduler noop registered
[ 0.565708] io scheduler deadline registered
[ 0.565774] io scheduler cfq registered (default)
[ 0.565915] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.565939] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.565978] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.565997] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.566108] ERST: Table is not found!
[ 0.566156] isapnp: Scanning for PnP cards...
[ 0.922737] isapnp: No Plug & Play device found
[ 0.922840] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.943502] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.167480] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.220237] hpet_acpi_add: no address or irqs in _CRS
[ 1.246758] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.249094] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.249178] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.249301] mousedev: PS/2 mouse device common for all mice
[ 1.249402] rtc_cmos 00:03: RTC can wake from S4
[ 1.268872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.273495] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.273562] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.273626] cpuidle: using governor ladder
[ 1.273666] cpuidle: using governor menu
[ 1.273872] TCP cubic registered
[ 1.273912] NET: Registered protocol family 17
[ 1.273957] Registering the dns_resolver key type
[ 1.274014] Using IPI No-Shortcut mode
[ 1.274106] PM: Hibernation image not present or could not be loaded.
[ 1.274112] registered taskstats version 1
[ 1.274465] rtc_cmos 00:03: setting system clock to 2011-07-28 12:25:57 UTC (1311855957)
[ 1.274531] Initializing network drop monitor service
[ 1.274641] Freeing unused kernel memory: 512k freed
[ 1.274872] Write protecting the kernel text: 3380k
[ 1.274937] Write protecting the kernel read-only data: 1028k
[ 1.286500] udevd[48]: starting version 171
[ 1.312964] usbcore: registered new interface driver usbfs
[ 1.313036] usbcore: registered new interface driver hub
[ 1.346191] usbcore: registered new device driver usb
[ 1.358823] SCSI subsystem initialized
[ 1.374799] libata version 3.00 loaded.
[ 1.376398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.376475] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.376536] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.376602] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.383384] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.383461] ehci_hcd 0000:00:12.2: debug port 1
[ 1.383527] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 1.393393] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.393581] hub 1-0:1.0: USB hub found
[ 1.393624] hub 1-0:1.0: 6 ports detected
[ 1.393751] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.393811] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.393857] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.426729] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.426807] ehci_hcd 0000:00:13.2: debug port 1
[ 1.426871] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9ff400
[ 1.436720] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.436932] hub 2-0:1.0: USB hub found
[ 1.436975] hub 2-0:1.0: 6 ports detected
[ 1.437316] ahci 0000:00:11.0: version 3.0
[ 1.437335] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.437426] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[ 1.437509] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.437555] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.438331] scsi0 : ahci
[ 1.438474] scsi1 : ahci
[ 1.438572] scsi2 : ahci
[ 1.438670] scsi3 : ahci
[ 1.438792] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 42
[ 1.438837] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 42
[ 1.438882] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 42
[ 1.438927] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 42
[ 1.440180] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.440246] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.440572] scsi4 : pata_atiixp
[ 1.440676] scsi5 : pata_atiixp
[ 1.440809] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.441177] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.441219] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.441416] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.441474] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.442554] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.450150] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 1.507559] hub 3-0:1.0: USB hub found
[ 1.507607] hub 3-0:1.0: 3 ports detected
[ 1.507721] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.507780] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.507826] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.520054] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 1.563395] Refined TSC clocksource calibration: 2893.611 MHz.
[ 1.563444] Switching to clocksource tsc
[ 1.577554] hub 4-0:1.0: USB hub found
[ 1.577602] hub 4-0:1.0: 3 ports detected
[ 1.577708] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.577766] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.577810] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.604836] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 1.610514] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB02, max UDMA/66
[ 1.610562] ata6.00: limited to UDMA/33 due to 40-wire cable
[ 1.623785] ata6.00: configured for UDMA/33
[ 1.660876] hub 5-0:1.0: USB hub found
[ 1.660925] hub 5-0:1.0: 3 ports detected
[ 1.661031] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.661089] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.661134] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.680092] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 1.700066] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.737558] hub 6-0:1.0: USB hub found
[ 1.737607] hub 6-0:1.0: 3 ports detected
[ 1.737711] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.737770] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.737815] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.760081] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.760234] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.763404] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fa000
[ 1.820892] hub 7-0:1.0: USB hub found
[ 1.820941] hub 7-0:1.0: 2 ports detected
[ 1.926730] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.926821] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.927617] ata1.00: ATA-8: WDC WD3200AAKS-00L9A0, 01.03E01, max UDMA/133
[ 1.927663] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.928572] ata1.00: configured for UDMA/133
[ 1.928809] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
[ 1.933394] usb 1-2: new high speed USB device number 3 using ehci_hcd
[ 1.973024] ata2.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[ 1.973069] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.031331] ata2.00: configured for UDMA/133
[ 2.031568] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 2.032550] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222A SB02 PQ: 0 ANSI: 5
[ 2.043999] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.044014] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.044043] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.044045] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.044057] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.044207] sd 0:0:0:0: [sda] Write Protect is off
[ 2.044248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.044260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.079367] sdb: sdb1
[ 2.079622] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.101975] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 2.102410] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.107093] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.107143] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.107407] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.200091] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.845658] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 3.691341] udevd[325]: starting version 171
[ 3.953113] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.954430] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.954460] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 4.019972] ACPI: acpi_idle registered with cpuidle
[ 4.025825] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.025831] ACPI: Power Button [PWRB]
[ 4.025873] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.025876] ACPI: Power Button [PWRF]
[ 4.042104] Linux agpgart interface v0.103
[ 4.083744] [drm] Initialized drm 1.1.0 20060810
[ 4.097788] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.097856] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.099873] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.110558] usbcore: registered new interface driver uas
[ 4.123871] wmi: Mapper loaded
[ 4.158622] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.158645] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.158677] r8169 0000:02:00.0: setting latency timer to 64
[ 4.158833] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 4.159010] r8169 0000:02:00.0: eth0: RTL8102e at 0xf8606000, 00:19:66:ff:89:3c, XID 04a00000 IRQ 43
[ 4.173846] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.335850] [drm] radeon defaulting to kernel modesetting.
[ 4.335853] [drm] radeon kernel modesetting enabled.
[ 4.335913] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.335918] radeon 0000:01:00.0: setting latency timer to 64
[ 4.336063] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8).
[ 4.336085] [drm] register mmio base: 0xFEAE0000
[ 4.336087] [drm] register mmio size: 131072
[ 4.337413] ATOM BIOS: REDWOOD
[ 4.337442] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 4.337445] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 4.337669] [drm] Detected VRAM RAM=512M, BAR=256M
[ 4.337673] [drm] RAM width 128bits DDR
[ 4.337758] [TTM] Zone kernel: Available graphics memory: 438702 kiB.
[ 4.337761] [TTM] Zone highmem: Available graphics memory: 1032466 kiB.
[ 4.337763] [TTM] Initializing pool allocator.
[ 4.337792] [drm] radeon: 512M of VRAM memory ready
[ 4.337793] [drm] radeon: 512M of GTT memory ready.
[ 4.337806] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.337807] [drm] Driver supports precise vblank timestamp query.
[ 4.337840] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[ 4.337845] radeon 0000:01:00.0: radeon: using MSI.
[ 4.337873] [drm] radeon: irq initialized.
[ 4.337877] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.338383] [drm] Loading REDWOOD Microcode
[ 4.356826] Linux media interface: v0.10
[ 4.364001] Initializing USB Mass Storage driver...
[ 4.364180] scsi6 : usb-storage 1-1:1.0
[ 4.364307] scsi7 : usb-storage 2-1:1.0
[ 4.364475] usbcore: registered new interface driver usb-storage
[ 4.364476] USB Mass Storage support registered.
[ 4.366218] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.366280] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 4.441694] ppdev: user-space parallel port driver
[ 4.477814] psmouse serio1: ID: 10 00 64
[ 4.689438] Linux video capture interface: v2.00
[ 4.721019] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6310)
[ 4.737562] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input4
[ 4.737615] usbcore: registered new interface driver uvcvideo
[ 4.737617] USB Video Class driver (v1.0.0)
[ 4.942272] radeon 0000:01:00.0: WB enabled
[ 4.958462] [drm] ring test succeeded in 1 usecs
[ 4.958556] [drm] radeon: ib pool ready.
[ 4.958609] [drm] ib test succeeded in 0 usecs
[ 4.958616] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 4.959384] [drm] Radeon Display Connectors
[ 4.959387] [drm] Connector 0:
[ 4.959388] [drm] HDMI-A
[ 4.959389] [drm] HPD5
[ 4.959391] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 4.959392] [drm] Encoders:
[ 4.959394] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.959395] [drm] Connector 1:
[ 4.959396] [drm] DVI-I
[ 4.959397] [drm] HPD1
[ 4.959398] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 4.959400] [drm] Encoders:
[ 4.959401] [drm] DFP2: INTERNAL_UNIPHY1
[ 4.959402] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.959403] [drm] Connector 2:
[ 4.959404] [drm] VGA
[ 4.959406] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 4.959407] [drm] Encoders:
[ 4.959408] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 5.032967] [drm] Internal thermal controller with fan control
[ 5.033041] [drm] radeon: power management initialized
[ 5.090968] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 5.108355] [drm] fb mappable at 0xD0141000
[ 5.108357] [drm] vram apper at 0xD0000000
[ 5.108358] [drm] size 5324800
[ 5.108359] [drm] fb depth is 24
[ 5.108360] [drm] pitch is 5888
[ 5.108453] fbcon: radeondrmfb (fb0) is primary device
[ 5.213544] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.318256] Console: switching to colour frame buffer device 180x56
[ 5.322971] fb0: radeondrmfb frame buffer device
[ 5.322972] drm: registered panic notifier
[ 5.322979] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 5.323017] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.323065] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 5.323084] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 5.364244] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 5.364427] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 5.365732] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 5.365904] sd 7:0:0:1: Attached scsi generic sg4 type 0
[ 5.366991] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 5.368194] sd 7:0:0:2: Attached scsi generic sg5 type 0
[ 5.368813] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[ 5.370078] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 5.370589] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 5.370749] sd 7:0:0:3: Attached scsi generic sg6 type 0
[ 5.371571] sd 7:0:0:2: [sde] Attached SCSI removable disk
[ 5.374194] sd 7:0:0:3: [sdf] Attached SCSI removable disk
[ 5.431505] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.431510] Disabling lock debugging due to kernel taint
[ 5.476704] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 5.480176] [fglrx] Maximum main memory to use for locked dma buffers: 1889 MBytes.
[ 5.480252] [fglrx] vendor: 1002 device: 68d8 count: 1
[ 5.480563] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 5.480572] radeon 0000:01:00.0: setting latency timer to 64
[ 5.480838] [fglrx] Kernel PAT support is enabled
[ 5.480857] [fglrx] module loaded - fglrx 8.86.5 [May 24 2011] with 1 minors
[ 5.710080] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 5.943413] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 6.002381] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 6.090748] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 6.114038] Adding 1951860k swap on /dev/sda6. Priority:-1 extents:1 across:1951860k
[ 6.176725] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[ 7.228084] r8169 0000:02:00.0: eth0: link down
[ 7.228089] r8169 0000:02:00.0: eth0: link down
[ 8.930707] r8169 0000:02:00.0: eth0: link up
[ 232.027761] NET: Registered protocol family 10
[ 242.336670] eth0: no IPv6 routers presentCode : Tout sélectionner
lsmodCode : Tout sélectionner
Module Size Used by
ipv6 249068 18
ext2 55475 1
fglrx 2439368 0
snd_hda_codec_hdmi 20368 1
snd_hda_codec_realtek 225687 1
snd_hda_intel 19261 0
snd_hda_codec 66665 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4919 1 snd_hda_codec
uvcvideo 55084 0
snd_pcm 60311 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 15542 1 snd_pcm
snd 43399 7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
videodev 70734 1 uvcvideo
soundcore 5018 1 snd
ppdev 4822 0
serio_raw 3430 0
snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
parport_pc 27902 0
usb_storage 35215 0
media 8513 1 videodev
psmouse 55927 0
radeon 908324 2
ttm 45533 1 radeon
evdev 7310 5
pcspkr 1415 0
r8169 34891 0
mii 3383 1 r8169
wmi 7367 0
uas 6480 0
i2c_piix4 7124 0
sp5100_tco 3768 0
k10temp 2147 0
drm_kms_helper 24245 1 radeon
drm 147653 4 radeon,ttm,drm_kms_helper
parport 26107 2 ppdev,parport_pc
agpgart 22160 3 fglrx,ttm,drm
i2c_algo_bit 4431 1 radeon
i2c_core 16665 6 videodev,radeon,i2c_piix4,drm_kms_helper,drm,i2c_algo_bit
button 3654 1 fglrx
processor 21884 0
sg 21022 0
ext4 334562 2
mbcache 4321 2 ext2,ext4
jbd2 59098 1 ext4
crc16 1077 1 ext4
sr_mod 12956 0
cdrom 31341 1 sr_mod
sd_mod 25483 5
pata_acpi 2396 0
ohci_hcd 19266 0
pata_atiixp 2928 0
ahci 18093 4
libahci 16581 1 ahci
ehci_hcd 34847 0
libata 154285 4 pata_acpi,pata_atiixp,ahci,libahci
scsi_mod 110702 6 usb_storage,uas,sg,sr_mod,sd_mod,libata
usbcore 119324 6 uvcvideo,usb_storage,uas,ohci_hcd,ehci_hcdCode : Tout sélectionner
modprobe fglrx-
FoolEcho
- Maître du Kyudo
- Messages : 10711
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Tu as le pilote radeon chargé, il concurrence le fglrx.
Pour tes tests avec catalyst, il faut décharger radeon d'abord:
Pour tes tests avec catalyst, il faut décharger radeon d'abord:
Code : Tout sélectionner
rmmod radeon«The following statement is not true. The previous statement is true.»
-
Desintegr
- Chu Ko Nu
- Messages : 354
- Inscription : jeu. 28 avr. 2011, 16:42
- Localisation : Orléans - France
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Le module fglrx est bien chargé mais le module radeon l'est aussi.
Ça fait longtemps que je n'ai pas expérimenté les pilotes Catalyst, j'utilise les pilotes libres qui fonctionnent très bien pour l'usage que j'en fais.
Quand j'utilisais encore les pilotes Catalyst, le module radeon entrait en conflit avec le module fglrx, et ceci engendrait des problèmes (notamment des freezes de la machine).
Je te propose donc de blacklister le module radeon pour qu'il ne se charge pas au démarrage afin de s'assurer qu'il ne rentre en conflit avec le module fglrx.
Nous avons tout de même : alors que le module est bien chargé.
Sinon, as-tu configuré correctement le fichier xorg.conf avec l'outil aticonfig ?
Que contient le fichier xorg.conf ?
Ça fait longtemps que je n'ai pas expérimenté les pilotes Catalyst, j'utilise les pilotes libres qui fonctionnent très bien pour l'usage que j'en fais.
Quand j'utilisais encore les pilotes Catalyst, le module radeon entrait en conflit avec le module fglrx, et ceci engendrait des problèmes (notamment des freezes de la machine).
Je te propose donc de blacklister le module radeon pour qu'il ne se charge pas au démarrage afin de s'assurer qu'il ne rentre en conflit avec le module fglrx.
Nous avons tout de même :
Code : Tout sélectionner
[ 7757.117] (WW) fglrx(0): * DRI initialization failed *
[ 7757.117] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *Sinon, as-tu configuré correctement le fichier xorg.conf avec l'outil aticonfig ?
Que contient le fichier xorg.conf ?
-
FoolEcho
- Maître du Kyudo
- Messages : 10711
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Au passage, les gars, même avec ati, il serait temps de passer à la configuration modulaire de X et de laisser tomber xorg.conf (d'autres l'ont fait et ça marche, si, si: http://forums.archlinux.fr/post63509.ht ... onf#p63509 )Desintegr a écrit :Sinon, as-tu configuré correctement le fichier xorg.conf avec l'outil aticonfig ?
Que contient le fichier xorg.conf ?
«The following statement is not true. The previous statement is true.»
Re: [catalyst]ecran blanc pilote propriétaire ati(non resolu
Pour configure xorg, j'ai utiliser la commande :
sa donne sa (le xorg) :
puis j'ai fais :
Code : Tout sélectionner
aticonfig --initial --input=/etc/X11/xorg.confCode : Tout sélectionner
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "record"
Load "dri"
Load "dri2"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 410 260 # mm
Identifier "Monitor0"
VendorName "ACI"
ModelName "ASUS VW193D"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Code : Tout sélectionner
cp /etc/X11/xorg.conf /etc/X11/xorg.conf.d/xorg.conf-
FoolEcho
- Maître du Kyudo
- Messages : 10711
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [catalyst]ecran blanc pilote propriétaire ati(en cours)
Je le refais: 
1) il te faut décharger le module radeon, pour ta session en cours (en root):
(cf. http://archlinux.fr/news/changement-pou ... -un-module pour le faire au démarrage, quand tu seras assuré que tout marche correctement).
2) tu mets de côté ton xorg.conf et tu peux tenter de lancer X comme ça (je n'ai pas d'assurance que ça marche, je n'ai pas d'ati... et comme personne ne vient le confirmer ni n'a touché au wiki, et qu'en égoïste je ne vais pas chercher non plus, je ne sais pas comment réagi X...
) ou tu places simplement un 20-catalyst.conf (ce qui a l'avantage d'aider un peu X plutôt que de le laisser essayer tous les pilotes qu'il a en magasin) dans /etc/X11/xorg.conf.d/ avec:
(éventuellement tu rajoutes un screen.conf avec la section adéquate et un options.conf pour le DRI selon http://wiki.archlinux.fr/ATI#Configuration_2 (pareil, je n'ai pas d'ati, je ne sais pas si X ferait les ajustements tout seul) ... attention, car tout xorg.conf a des sections en double... les sections keyboard, mouse et cie sont à jeter => evdev fait le boulot (sauf pour avoir un clavier français, cf. wiki).
Pour dépoussiérer le wiki côté ati, ce type d'infos serait très bien...
1) il te faut décharger le module radeon, pour ta session en cours (en root):
Code : Tout sélectionner
rmmod radeon2) tu mets de côté ton xorg.conf et tu peux tenter de lancer X comme ça (je n'ai pas d'assurance que ça marche, je n'ai pas d'ati... et comme personne ne vient le confirmer ni n'a touché au wiki, et qu'en égoïste je ne vais pas chercher non plus, je ne sais pas comment réagi X...
) ou tu places simplement un 20-catalyst.conf (ce qui a l'avantage d'aider un peu X plutôt que de le laisser essayer tous les pilotes qu'il a en magasin) dans /etc/X11/xorg.conf.d/ avec:
Code : Tout sélectionner
Section "Device"
Identifier "catalyst"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Pour dépoussiérer le wiki côté ati, ce type d'infos serait très bien...
«The following statement is not true. The previous statement is true.»
Re: [catalyst]ecran blanc pilote propriétaire ati(en cours)
OK je vais teste (chaux)
-
FoolEcho
- Maître du Kyudo
- Messages : 10711
- Inscription : dim. 15 août 2010, 11:48
- Localisation : Basse-Normandie
Re: [catalyst]ecran blanc pilote propriétaire ati(en cours)
Tu peux reprendre le wiki http://wiki.archlinux.fr/ATI#Configuration_2, ça sera peut-être plus clair, je l'ai dépoussiéré grâce à un autre sujet récent et un autre utilisateur de catalyst http://forums.archlinux.fr/post75066.html#p75066 (on verra avec toi, vu que tu avais le pilote libre avant, c'est intéressant pour complèter/corriger).
«The following statement is not true. The previous statement is true.»