Re: [catalyst]ecran blanc pilote propriétaire ati (RESOLU)

dieujack · Message par **dieujack** » jeu. 04 août 2011, 07:29

Alors j'ai teste, toujours pareille ecran blanc , il y a quelque mois avant j'avais les pilotes catalyst et il marchais très bien . Puis j'ai reinstaller et là : "ercan blanc", alors j'ai teste les pilotes libres mais la 3D

. Donc je ne sais pas :
- trouver les vieux pilote catalyst (mais où?)
- configurer les pilotes libres ?
comme tu veux (merci pour sais tuto trop bien explique )

Message par **FoolEcho** » jeu. 04 août 2011, 09:22

dieujack a écrit :- trouver les vieux pilote catalyst (mais où?)

Tu ne les as plus dans le cache de pacman ? (/var/cache/pacman/pkg/ ) ... sinon je ne sais pas comment sont organisés les dépôts catalyst...

dieujack a écrit :- configurer les pilotes libres ?

Aucune idée... d'autant qu'on ne sait pas ce qui cause ton problème...

Tu pourrais montrer le log de X maintenant ? (peut-être même ton log de session aussi: ~/.xsession-errors , car ce n'est peut-être pas un problème de X mais de ton gestionnaire de fenêtres ? tu utilises quoi ? )

dieujack · Message par **dieujack** » jeu. 04 août 2011, 11:06

log de X :

Code : Tout sélectionner

[   178.357] 
X.Org X Server 1.10.3
Release Date: 2011-07-08
[   178.359] X Protocol Version 11, Revision 0
[   178.360] Build Operating System: Linux 2.6.39-ARCH i686 
[   178.361] Current Operating System: Linux myhost 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[   178.362] Kernel command line: root=/dev/sda7 ro
[   178.363] Build Date: 09 July 2011  07:57:07AM
[   178.364]  
[   178.364] Current version of pixman: 0.22.2
[   178.365] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   178.367] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   178.370] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug  4 10:48:20 2011
[   178.371] (==) Using config file: "/etc/X11/xorg.conf"
[   178.372] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   178.373] (==) ServerLayout "aticonfig Layout"
[   178.374] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   178.374] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   178.374] (**) |   |-->Device "aticonfig-Device[0]-0"
[   178.374] (==) Automatically adding devices
[   178.374] (==) Automatically enabling devices
[   178.374] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   178.374] 	Entry deleted from font path.
[   178.374] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   178.374] 	Entry deleted from font path.
[   178.374] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   178.374] 	Entry deleted from font path.
[   178.374] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   178.374] (==) ModulePath set to "/usr/lib/xorg/modules"
[   178.374] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   178.374] (II) Loader magic: 0x822e1a0
[   178.374] (II) Module ABI versions:
[   178.374] 	X.Org ANSI C Emulation: 0.4
[   178.374] 	X.Org Video Driver: 10.0
[   178.374] 	X.Org XInput driver : 12.2
[   178.374] 	X.Org Server Extension : 5.0
[   178.374] (--) PCI:*(0:1:0:0) 1002:68d8:174b:e152 rev 0, Mem @ 0xd0000000/268435456, 0xfeae0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[   178.374] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   178.374] (II) "extmod" will be loaded by default.
[   178.375] (II) "dbe" will be loaded by default.
[   178.375] (II) "glx" will be loaded by default.
[   178.375] (II) "record" will be loaded by default.
[   178.375] (II) "dri" will be loaded by default.
[   178.375] (II) "dri2" will be loaded by default.
[   178.375] (II) LoadModule: "extmod"
[   178.375] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   178.375] (II) Module extmod: vendor="X.Org Foundation"
[   178.375] 	compiled for 1.10.3, module version = 1.0.0
[   178.375] 	Module class: X.Org Server Extension
[   178.375] 	ABI class: X.Org Server Extension, version 5.0
[   178.375] (II) Loading extension MIT-SCREEN-SAVER
[   178.375] (II) Loading extension XFree86-VidModeExtension
[   178.375] (II) Loading extension XFree86-DGA
[   178.375] (II) Loading extension DPMS
[   178.375] (II) Loading extension XVideo
[   178.375] (II) Loading extension XVideo-MotionCompensation
[   178.375] (II) Loading extension X-Resource
[   178.375] (II) LoadModule: "dbe"
[   178.375] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   178.375] (II) Module dbe: vendor="X.Org Foundation"
[   178.375] 	compiled for 1.10.3, module version = 1.0.0
[   178.375] 	Module class: X.Org Server Extension
[   178.375] 	ABI class: X.Org Server Extension, version 5.0
[   178.375] (II) Loading extension DOUBLE-BUFFER
[   178.375] (II) LoadModule: "glx"
[   178.375] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   178.375] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[   178.375] 	compiled for 6.9.0, module version = 1.0.0
[   178.375] (II) Loading extension GLX
[   178.375] (II) LoadModule: "record"
[   178.376] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   178.376] (II) Module record: vendor="X.Org Foundation"
[   178.376] 	compiled for 1.10.3, module version = 1.13.0
[   178.376] 	Module class: X.Org Server Extension
[   178.376] 	ABI class: X.Org Server Extension, version 5.0
[   178.376] (II) Loading extension RECORD
[   178.376] (II) LoadModule: "dri"
[   178.376] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   178.376] (II) Module dri: vendor="X.Org Foundation"
[   178.376] 	compiled for 1.10.3, module version = 1.0.0
[   178.376] 	ABI class: X.Org Server Extension, version 5.0
[   178.376] (II) Loading extension XFree86-DRI
[   178.376] (II) LoadModule: "dri2"
[   178.376] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   178.376] (II) Module dri2: vendor="X.Org Foundation"
[   178.376] 	compiled for 1.10.3, module version = 1.2.0
[   178.376] 	ABI class: X.Org Server Extension, version 5.0
[   178.376] (II) Loading extension DRI2
[   178.376] (II) LoadModule: "fglrx"
[   178.376] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   178.562] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[   178.573] 	compiled for 1.4.99.906, module version = 8.87.5
[   178.573] 	Module class: X.Org Video Driver
[   178.574] (II) Loading sub module "fglrxdrm"
[   178.574] (II) LoadModule: "fglrxdrm"
[   178.574] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   178.588] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   178.588] 	compiled for 1.4.99.906, module version = 8.87.5
[   178.588] (II) ATI Proprietary Linux Driver Version Identifier:8.87.5
[   178.588] (II) ATI Proprietary Linux Driver Release Identifier: 8.872                                
[   178.588] (II) ATI Proprietary Linux Driver Build Date: Jul  7 2011 22:42:31
[   178.588] (--) using VT number 7

[   178.593] (WW) Falling back to old probe method for fglrx
[   178.628] (II) Loading PCS database from /etc/ati/amdpcsdb
[   178.630] (--) Chipset Supported AMD Graphics Processor (0x68D8) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[   178.630] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[   178.630] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[   178.635] (II) AMD Video driver is signed
[   178.635] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   178.635] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   178.635] (II) fglrx(0): pEnt->device->identifier=0x923d238
[   178.635] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[   178.635] (II) Loading sub module "vgahw"
[   178.635] (II) LoadModule: "vgahw"
[   178.635] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   178.642] (II) Module vgahw: vendor="X.Org Foundation"
[   178.642] 	compiled for 1.10.3, module version = 0.1.0
[   178.642] 	ABI class: X.Org Video Driver, version 10.0
[   178.642] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   178.642] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   178.642] (==) fglrx(0): Default visual is TrueColor
[   178.642] (**) fglrx(0): Option "DPMS" "true"
[   178.643] (==) fglrx(0): RGB weight 888
[   178.643] (II) fglrx(0): Using 8 bits per RGB 
[   178.643] (==) fglrx(0): Buffer Tiling is ON
[   178.644] (II) Loading sub module "fglrxdrm"
[   178.644] (II) LoadModule: "fglrxdrm"
[   178.644] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   178.644] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   178.644] 	compiled for 1.4.99.906, module version = 8.87.5
[   178.645] ukiDynamicMajor: found major device number 251
[   178.645] ukiDynamicMajor: found major device number 251
[   178.645] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   178.645] ukiOpenDevice: node name is /dev/ati/card0
[   178.645] ukiOpenDevice: open result is 10, (OK)
[   178.645] ukiOpenByBusid: ukiOpenMinor returns 10
[   178.645] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   178.645] (==) fglrx(0): NoAccel = NO
[   178.645] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[   178.645] (--) fglrx(0): Chipset: "ATI Radeon HD 5670" (Chipset = 0x68d8)
[   178.645] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe152)
[   178.645] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[   178.645] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[   178.645] (--) fglrx(0): MMIO registers at 0xfeae0000
[   178.645] (--) fglrx(0): I/O port at 0x0000d000
[   178.645] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   178.750] (II) fglrx(0): AC Adapter is used
[   178.779] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[   178.988] (II) Loading sub module "vbe"
[   178.988] (II) LoadModule: "vbe"
[   178.988] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   178.996] (II) Module vbe: vendor="X.Org Foundation"
[   178.996] 	compiled for 1.10.3, module version = 1.1.0
[   178.996] 	ABI class: X.Org Video Driver, version 10.0
[   178.996] (II) fglrx(0): VESA BIOS detected
[   178.996] (II) fglrx(0): VESA VBE Version 3.0
[   178.996] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[   178.996] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[   178.996] (II) fglrx(0): VESA VBE OEM Software Rev: 12.18
[   178.996] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[   178.996] (II) fglrx(0): VESA VBE OEM Product: 2
[   178.996] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[   179.033] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[   179.033] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[   179.033] (II) fglrx(0): PCIE card detected
[   179.033] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   179.033] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   179.036] (II) fglrx(0): Using adapter: 1:0.0.
[   179.066] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[   179.069] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[   179.069] (II) fglrx(0): RandR 1.2 support is enabled!
[   179.069] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   179.069] (==) fglrx(0): Center Mode is disabled 
[   179.069] (II) Loading sub module "fb"
[   179.069] (II) LoadModule: "fb"
[   179.069] (II) Loading /usr/lib/xorg/modules/libfb.so
[   179.076] (II) Module fb: vendor="X.Org Foundation"
[   179.076] 	compiled for 1.10.3, module version = 1.0.0
[   179.076] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   179.076] (II) Loading sub module "ddc"
[   179.076] (II) LoadModule: "ddc"
[   179.076] (II) Module "ddc" already built-in
[   179.175] (II) fglrx(0): Finished Initialize PPLIB!
[   179.188] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[   179.188] (II) fglrx(0): Output DFP2 has no monitor section
[   179.188] (II) fglrx(0): Output CRT1 has no monitor section
[   179.188] (II) fglrx(0): Output CRT2 has no monitor section
[   179.188] (II) Loading sub module "ddc"
[   179.188] (II) LoadModule: "ddc"
[   179.188] (II) Module "ddc" already built-in
[   179.188] (II) fglrx(0): Connected Display0: CRT2
[   179.188] (II) fglrx(0): Display0 EDID data ---------------------------
[   179.188] (II) fglrx(0): Manufacturer: ACI  Model: 19d5  Serial#: 139233
[   179.188] (II) fglrx(0): Year: 2009  Week: 39
[   179.188] (II) fglrx(0): EDID Version: 1.3
[   179.188] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   179.188] (II) fglrx(0): Sync:  Separate
[   179.188] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[   179.188] (II) fglrx(0): Gamma: 2.20
[   179.188] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   179.188] (II) fglrx(0): First detailed timing is preferred mode
[   179.188] (II) fglrx(0): redX: 0.650 redY: 0.340   greenX: 0.290 greenY: 0.610
[   179.188] (II) fglrx(0): blueX: 0.150 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[   179.188] (II) fglrx(0): Supported established timings:
[   179.188] (II) fglrx(0): 720x400@70Hz
[   179.188] (II) fglrx(0): 640x480@60Hz
[   179.188] (II) fglrx(0): 640x480@67Hz
[   179.188] (II) fglrx(0): 640x480@72Hz
[   179.188] (II) fglrx(0): 640x480@75Hz
[   179.189] (II) fglrx(0): 800x600@56Hz
[   179.189] (II) fglrx(0): 800x600@60Hz
[   179.189] (II) fglrx(0): 800x600@72Hz
[   179.189] (II) fglrx(0): 800x600@75Hz
[   179.189] (II) fglrx(0): 832x624@75Hz
[   179.189] (II) fglrx(0): 1024x768@60Hz
[   179.189] (II) fglrx(0): 1024x768@70Hz
[   179.189] (II) fglrx(0): 1024x768@75Hz
[   179.189] (II) fglrx(0): 1280x1024@75Hz
[   179.189] (II) fglrx(0): 1152x864@75Hz
[   179.189] (II) fglrx(0): Manufacturer's mask: 0
[   179.189] (II) fglrx(0): Supported standard timings:
[   179.189] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   179.189] (II) fglrx(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   179.189] (II) fglrx(0): #2: hsize: 1280  vsize 800  refresh: 75  vid: 3969
[   179.189] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   179.189] (II) fglrx(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   179.189] (II) fglrx(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   179.189] (II) fglrx(0): #6: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[   179.189] (II) fglrx(0): Supported detailed timing:
[   179.189] (II) fglrx(0): clock: 106.5 MHz   Image Size:  408 x 255 mm
[   179.189] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[   179.189] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[   179.189] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[   179.189] (II) fglrx(0): Monitor name: ASUS VW193D
[   179.189] (II) fglrx(0): Serial No: 99LMTF139233
[   179.189] (II) fglrx(0): EDID (in hex):
[   179.189] (II) fglrx(0): 	00ffffffffffff000469d519e11f0200
[   179.189] (II) fglrx(0): 	2713010308291a78ea8585a6574a9c26
[   179.189] (II) fglrx(0): 	125054bfef80714f8100810f81408180
[   179.189] (II) fglrx(0): 	9500950f01019a29a0d0518422305098
[   179.189] (II) fglrx(0): 	360098ff1000001c000000fd00374b1e
[   179.189] (II) fglrx(0): 	530f000a202020202020000000fc0041
[   179.189] (II) fglrx(0): 	535553205657313933440a20000000ff
[   179.189] (II) fglrx(0): 	0039394c4d54463133393233330a0002
[   179.189] (II) fglrx(0): End of Display0 EDID data --------------------
[   179.198] (II) fglrx(0): EDID for output DFP1
[   179.198] (II) fglrx(0): EDID for output DFP2
[   179.198] (II) fglrx(0): EDID for output CRT1
[   179.198] (II) fglrx(0): EDID for output CRT2
[   179.198] (II) fglrx(0): Manufacturer: ACI  Model: 19d5  Serial#: 139233
[   179.198] (II) fglrx(0): Year: 2009  Week: 39
[   179.198] (II) fglrx(0): EDID Version: 1.3
[   179.198] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   179.198] (II) fglrx(0): Sync:  Separate
[   179.198] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[   179.198] (II) fglrx(0): Gamma: 2.20
[   179.198] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   179.198] (II) fglrx(0): First detailed timing is preferred mode
[   179.198] (II) fglrx(0): redX: 0.650 redY: 0.340   greenX: 0.290 greenY: 0.610
[   179.198] (II) fglrx(0): blueX: 0.150 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[   179.198] (II) fglrx(0): Supported established timings:
[   179.198] (II) fglrx(0): 720x400@70Hz
[   179.198] (II) fglrx(0): 640x480@60Hz
[   179.198] (II) fglrx(0): 640x480@67Hz
[   179.198] (II) fglrx(0): 640x480@72Hz
[   179.198] (II) fglrx(0): 640x480@75Hz
[   179.198] (II) fglrx(0): 800x600@56Hz
[   179.198] (II) fglrx(0): 800x600@60Hz
[   179.198] (II) fglrx(0): 800x600@72Hz
[   179.198] (II) fglrx(0): 800x600@75Hz
[   179.198] (II) fglrx(0): 832x624@75Hz
[   179.198] (II) fglrx(0): 1024x768@60Hz
[   179.198] (II) fglrx(0): 1024x768@70Hz
[   179.198] (II) fglrx(0): 1024x768@75Hz
[   179.198] (II) fglrx(0): 1280x1024@75Hz
[   179.198] (II) fglrx(0): 1152x864@75Hz
[   179.198] (II) fglrx(0): Manufacturer's mask: 0
[   179.198] (II) fglrx(0): Supported standard timings:
[   179.198] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   179.198] (II) fglrx(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   179.198] (II) fglrx(0): #2: hsize: 1280  vsize 800  refresh: 75  vid: 3969
[   179.198] (II) fglrx(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   179.198] (II) fglrx(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   179.198] (II) fglrx(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   179.198] (II) fglrx(0): #6: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[   179.198] (II) fglrx(0): Supported detailed timing:
[   179.198] (II) fglrx(0): clock: 106.5 MHz   Image Size:  408 x 255 mm
[   179.198] (II) fglrx(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[   179.198] (II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[   179.198] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[   179.198] (II) fglrx(0): Monitor name: ASUS VW193D
[   179.198] (II) fglrx(0): Serial No: 99LMTF139233
[   179.198] (II) fglrx(0): EDID (in hex):
[   179.198] (II) fglrx(0): 	00ffffffffffff000469d519e11f0200
[   179.198] (II) fglrx(0): 	2713010308291a78ea8585a6574a9c26
[   179.198] (II) fglrx(0): 	125054bfef80714f8100810f81408180
[   179.198] (II) fglrx(0): 	9500950f01019a29a0d0518422305098
[   179.198] (II) fglrx(0): 	360098ff1000001c000000fd00374b1e
[   179.198] (II) fglrx(0): 	530f000a202020202020000000fc0041
[   179.198] (II) fglrx(0): 	535553205657313933440a20000000ff
[   179.198] (II) fglrx(0): 	0039394c4d54463133393233330a0002
[   179.198] (II) fglrx(0): Printing probed modes for output CRT2
[   179.198] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[   179.198] (II) fglrx(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x800"x75.0  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x800"x60.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[   179.198] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   179.198] (II) fglrx(0): Modeline "1152x864"x60.0  106.50  1152 1520 1672 1904  864 903 909 934 -hsync +vsync (55.9 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x768"x75.0  106.50  1280 1360 1488 1696  768 803 809 838 -hsync +vsync (62.8 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x768"x60.0   83.50  1280 1352 1480 1680  768 803 809 831 -hsync +vsync (49.7 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x720"x75.0  106.50  1280 1360 1488 1696  720 803 809 838 -hsync +vsync (62.8 kHz)
[   179.198] (II) fglrx(0): Modeline "1280x720"x60.0   83.50  1280 1352 1480 1680  720 803 809 831 -hsync +vsync (49.7 kHz)
[   179.198] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   179.198] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   179.198] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   179.198] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   179.198] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   179.198] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   179.198] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   179.198] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   179.198] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz)
[   179.198] (II) fglrx(0): Modeline "640x480"x67.0   27.28  640 664 728 816  480 481 484 499 -hsync +vsync (33.4 kHz)
[   179.198] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   179.198] (II) fglrx(0): Output DFP1 disconnected
[   179.198] (II) fglrx(0): Output DFP2 disconnected
[   179.198] (II) fglrx(0): Output CRT1 disconnected
[   179.198] (II) fglrx(0): Output CRT2 connected
[   179.198] (II) fglrx(0): Using exact sizes for initial modes
[   179.198] (II) fglrx(0): Output CRT2 using initial mode 1440x900
[   179.198] (II) fglrx(0): DPI set to (96, 96)
[   179.199] (II) fglrx(0): Adapter ATI Radeon HD 5670 has 2 configurable heads and 1 displays connected.
[   179.199] (==) fglrx(0):  PseudoColor visuals disabled
[   179.199] (II) Loading sub module "ramdac"
[   179.199] (II) LoadModule: "ramdac"
[   179.199] (II) Module "ramdac" already built-in
[   179.199] (==) fglrx(0): NoDRI = NO
[   179.199] (==) fglrx(0): Capabilities: 0x00000000
[   179.199] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   179.199] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   179.199] (==) fglrx(0): UseFastTLS=0
[   179.199] (==) fglrx(0): BlockSignalsOnLock=1
[   179.199] (--) Depth 24 pixmap format is 32 bpp
[   179.199] (II) Loading extension ATIFGLRXDRI
[   179.199] (II) fglrx(0): doing swlDriScreenInit
[   179.199] (II) fglrx(0): swlDriScreenInit for fglrx driver
[   179.199] ukiDynamicMajor: found major device number 251
[   179.199] ukiDynamicMajor: found major device number 251
[   179.199] ukiDynamicMajor: found major device number 251
[   179.199] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   179.199] ukiOpenDevice: node name is /dev/ati/card0
[   179.199] ukiOpenDevice: open result is 15, (OK)
[   179.199] ukiOpenByBusid: ukiOpenMinor returns 15
[   179.199] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   179.199] (II) fglrx(0): [uki] DRM interface version 1.0
[   179.199] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[   179.199] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[   179.199] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7266000
[   179.199] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[   179.199] (II) fglrx(0): [uki] added 1 reserved context for kernel
[   179.199] (II) fglrx(0): swlDriScreenInit done
[   179.199] (II) fglrx(0): Kernel Module Version Information:
[   179.199] (II) fglrx(0):     Name: fglrx
[   179.200] (II) fglrx(0):     Version: 8.87.5
[   179.200] (II) fglrx(0):     Date: Jul  7 2011
[   179.200] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[   179.200] (II) fglrx(0): Kernel Module version matches driver.
[   179.200] (II) fglrx(0): Kernel Module Build Time Information:
[   179.200] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.39-ARCH
[   179.200] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[   179.200] (II) fglrx(0):     Build-Kernel __SMP__:            no
[   179.200] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[   179.200] (II) fglrx(0): [uki] register handle = 0x00004000
[   179.209] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
[   179.209] (II) fglrx(0): Shutdown CMMQS
[   179.209] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[   179.209] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0xb7266000
[   179.209] (WW) fglrx(0): ***********************************************************
[   179.209] (WW) fglrx(0): * DRI initialization failed                               *
[   179.209] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[   179.209] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[   179.209] (WW) fglrx(0): ***********************************************************
[   179.209] 
Fatal server error:
[   179.209] AddScreen/ScreenInit failed for driver 0
[   179.209] 
[   179.209] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   179.209] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   179.209]

Je n'ai pas trouver le ~/.xsession-errors (j'ai chercher dans "/var/log/").
Comme gestionnaire de fenêtres j'utilises WMII .
Pour la configurer les pilotes libres, peu ton avoir la 3d ? (si oui comment) .
Pour les vieux pilote catalyst, dans le tuto il faux mettre un lien dans pacman.conf . Aurait t'il un autre lien pour avoir (exemple) la version 10 ou 11

Message par **benjarobin** » jeu. 04 août 2011, 11:12

le fichier "~/.xsession-errors" se trouve dans le dossier "~/" c'est à dire le home de l'utilisateur. "~/" est égales à "/home/ton-user/" ou "/root/"

dieujack · Message par **dieujack** » jeu. 04 août 2011, 11:18

non je n'ai rien trouver, j'ai utilisé les commande

Code : Tout sélectionner

ls -a /root 
ls -a /home/"mon utilisateur"

et merci pour l'info

Message par **FoolEcho** » jeu. 04 août 2011, 11:54

Au vu du log de X de toutes manières (ho, encore un xorg.conf

), le .xsession-errors importe peu:

dieujack a écrit :

Code : Tout sélectionner

[   179.209] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
[   179.209] (II) fglrx(0): Shutdown CMMQS
[   179.209] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[   179.209] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0xb7266000
[   179.209] (WW) fglrx(0): ***********************************************************
[   179.209] (WW) fglrx(0): * DRI initialization failed                               *
[   179.209] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[   179.209] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[   179.209] (WW) fglrx(0): ***********************************************************

Même erreur que précédemment. Faudrait vérifier la présence de ce fglrx dans le système (locate) et dans le paquet d'où il vient déjà... ... et voir comment ton modèle de carte est pris en charge que ce soit par les pilotes libres ou catalyst (y a quand même beaucoup de warnings par ailleurs)...

dieujack a écrit :Pour la configurer les pilotes libres, peu ton avoir la 3d ? (si oui comment) .

Pas d'ati, je ne sais pas.

dieujack a écrit :Pour les vieux pilote catalyst, dans le tuto il faux mettre un lien dans pacman.conf . Aurait t'il un autre lien pour avoir (exemple) la version 10 ou 11

C'est par rapport au nom du dépôt, il semble: https://wiki.archlinux.org/index.php/AT ... positories.

Desintegr · Message par **Desintegr** » jeu. 04 août 2011, 12:21

Tu es certain d'avoir blacklisté correctement le module radeon ?

Que renvoie :

Code : Tout sélectionner

lsmod | grep -E "(fglrx|radeon)"

dieujack · Message par **dieujack** » jeu. 04 août 2011, 13:09

la commande

Code : Tout sélectionner

lsmod | grep -E "(fglrx|radeon)"

renvoie sa :

Code : Tout sélectionner

fglrx                2504859  0 
radeon                908324  2 
ttm                    45533  1 radeon
drm_kms_helper         24245  1 radeon
drm                   147653  4 radeon,ttm,drm_kms_helper
agpgart                22160  3 fglrx,ttm,drm
i2c_algo_bit            4431  1 radeon
i2c_core               16665  6 videodev,radeon,i2c_piix4,drm_kms_helper,drm,i2c_algo_bit
button                  3654  1 fglrx

par contre je vais reteste blacklist

Desintegr · Message par **Desintegr** » jeu. 04 août 2011, 13:15

Le module radeon est toujours chargé et peut donc toujours entrer en conflit avec fglrx.

dieujack · Message par **dieujack** » jeu. 04 août 2011, 13:31

Je peu tout reinstaller installer direct le pilote catalyst ? il y aurai plus de conflit ?

Desintegr · Message par **Desintegr** » jeu. 04 août 2011, 13:34

Tu dois blacklister le module radeon pour éviter qu'il ne rentre en conflit avec le module fglrx.

dieujack · Message par **dieujack** » jeu. 04 août 2011, 14:19

je vous remercie a tout les deux vous êtes des dieu d'archlinux cette bien le module radeon (j'ai mal fais blacklist, j'ai relu le tuto http://wiki.archlinux.fr/ATI#Configuration_2 )

merci encore

Arch Linux

Archlinux.fr [Forums]

Re: [catalyst]ecran blanc pilote propriétaire ati (RESOLU)

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati

Re: [catalyst]ecran blanc pilote propriétaire ati (RESOLU)