[DRI] fonctionne pas avec ma Radeon 9600[Résolu]

d2_racing · Message par **d2_racing** » dim. 20 mai 2007, 17:26

Salut, je veux avoir le DRI, sauf que ça fonctionne pas

J'ai une erreur a propos de agpgart...vu que je sais pas comment compilé, est-ce que le problème vient de là...

Sous Gentoo ou Debian, j'ai jamais eu de problèmes avec le DRI.

Voici mon Log :

Code : Tout sélectionner


X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN 
Current Operating System: Linux ArchLinux 2.6.21-ARCH #1 SMP PREEMPT Sun May 6 18:33:47 CEST 2007 i686
Build Date: 08 April 2007
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 20 11:03:03 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "LGF700B"
(**) |   |-->Device "RADEON9600PRO"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "RENDER" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.1
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1043,80f2 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1043,80a6 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,24d1 card 1043,80a6 rev 02 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1043,80f3 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4150 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4170 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:05:0: chip 10b7,1700 card 1043,80eb rev 12 class 02,00,00 hdr 00
(II) PCI: 02:0a:0: chip 14f1,10b6 card a0a0,00c2 rev 89 class 07,80,00 hdr 00
(II) PCI: 02:0b:0: chip 1186,1300 card 1186,1300 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xfe900000 - 0xfe9fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xb7f00000 - 0xf7efffff (0x40000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xfea00000 - 0xfeafffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xe0000000/28, 0xfe9f0000/16, I/O @ 0xc000/8, BIOS @ 0xfe9c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) rev 0, Mem @ 0xd0000000/28, 0xfe9e0000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xfeafbc00 - 0xfeafbcff (0x100) MX[B]
	[1] -1	0	0xfeae0000 - 0xfeaeffff (0x10000) MX[B]
	[2] -1	0	0xfeafc000 - 0xfeafffff (0x4000) MX[B]
	[3] -1	0	0xfebff400 - 0xfebff4ff (0x100) MX[B]
	[4] -1	0	0xfebff800 - 0xfebff9ff (0x200) MX[B]
	[5] -1	0	0x50000000 - 0x500003ff (0x400) MX[B]
	[6] -1	0	0xfebffc00 - 0xfebfffff (0x400) MX[B]
	[7] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[8] -1	0	0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[10] -1	0	0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
	[11] -1	0	0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
	[12] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[13] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[14] -1	0	0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
	[15] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[16] -1	0	0x0000ee80 - 0x0000eebf (0x40) IX[B]
	[17] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[18] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[19] -1	0	0x0000ef60 - 0x0000ef6f (0x10) IX[B]
	[20] -1	0	0x0000efa8 - 0x0000efab (0x4) IX[B]
	[21] -1	0	0x0000efa0 - 0x0000efa7 (0x8) IX[B]
	[22] -1	0	0x0000efac - 0x0000efaf (0x4) IX[B]
	[23] -1	0	0x0000efe0 - 0x0000efe7 (0x8) IX[B]
	[24] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[26] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[27] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[29] -1	0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]
	[30] -1	0	0x0000ef40 - 0x0000ef5f (0x20) IX[B]
	[31] -1	0	0x0000ef20 - 0x0000ef3f (0x20) IX[B]
	[32] -1	0	0x0000ef00 - 0x0000ef1f (0x20) IX[B]
	[33] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xfeafbc00 - 0xfeafbcff (0x100) MX[B]
	[1] -1	0	0xfeae0000 - 0xfeaeffff (0x10000) MX[B]
	[2] -1	0	0xfeafc000 - 0xfeafffff (0x4000) MX[B]
	[3] -1	0	0xfebff400 - 0xfebff4ff (0x100) MX[B]
	[4] -1	0	0xfebff800 - 0xfebff9ff (0x200) MX[B]
	[5] -1	0	0x50000000 - 0x500003ff (0x400) MX[B]
	[6] -1	0	0xfebffc00 - 0xfebfffff (0x400) MX[B]
	[7] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[8] -1	0	0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[10] -1	0	0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
	[11] -1	0	0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
	[12] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[13] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[14] -1	0	0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
	[15] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[16] -1	0	0x0000ee80 - 0x0000eebf (0x40) IX[B]
	[17] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[18] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[19] -1	0	0x0000ef60 - 0x0000ef6f (0x10) IX[B]
	[20] -1	0	0x0000efa8 - 0x0000efab (0x4) IX[B]
	[21] -1	0	0x0000efa0 - 0x0000efa7 (0x8) IX[B]
	[22] -1	0	0x0000efac - 0x0000efaf (0x4) IX[B]
	[23] -1	0	0x0000efe0 - 0x0000efe7 (0x8) IX[B]
	[24] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[26] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[27] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[29] -1	0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]
	[30] -1	0	0x0000ef40 - 0x0000ef5f (0x20) IX[B]
	[31] -1	0	0x0000ef20 - 0x0000ef3f (0x20) IX[B]
	[32] -1	0	0x0000ef00 - 0x0000ef1f (0x20) IX[B]
	[33] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfeafbc00 - 0xfeafbcff (0x100) MX[B]
	[5] -1	0	0xfeae0000 - 0xfeaeffff (0x10000) MX[B]
	[6] -1	0	0xfeafc000 - 0xfeafffff (0x4000) MX[B]
	[7] -1	0	0xfebff400 - 0xfebff4ff (0x100) MX[B]
	[8] -1	0	0xfebff800 - 0xfebff9ff (0x200) MX[B]
	[9] -1	0	0x50000000 - 0x500003ff (0x400) MX[B]
	[10] -1	0	0xfebffc00 - 0xfebfffff (0x400) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[14] -1	0	0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
	[15] -1	0	0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
	[16] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[20] -1	0	0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
	[21] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[22] -1	0	0x0000ee80 - 0x0000eebf (0x40) IX[B]
	[23] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[24] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[25] -1	0	0x0000ef60 - 0x0000ef6f (0x10) IX[B]
	[26] -1	0	0x0000efa8 - 0x0000efab (0x4) IX[B]
	[27] -1	0	0x0000efa0 - 0x0000efa7 (0x8) IX[B]
	[28] -1	0	0x0000efac - 0x0000efaf (0x4) IX[B]
	[29] -1	0	0x0000efe0 - 0x0000efe7 (0x8) IX[B]
	[30] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[31] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[32] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[33] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[34] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[35] -1	0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]
	[36] -1	0	0x0000ef40 - 0x0000ef5f (0x20) IX[B]
	[37] -1	0	0x0000ef20 - 0x0000ef3f (0x20) IX[B]
	[38] -1	0	0x0000ef00 - 0x0000ef1f (0x20) IX[B]
	[39] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules//libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.2.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 4.2.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 6.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon 9600 AP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfeafbc00 - 0xfeafbcff (0x100) MX[B]
	[5] -1	0	0xfeae0000 - 0xfeaeffff (0x10000) MX[B]
	[6] -1	0	0xfeafc000 - 0xfeafffff (0x4000) MX[B]
	[7] -1	0	0xfebff400 - 0xfebff4ff (0x100) MX[B]
	[8] -1	0	0xfebff800 - 0xfebff9ff (0x200) MX[B]
	[9] -1	0	0x50000000 - 0x500003ff (0x400) MX[B]
	[10] -1	0	0xfebffc00 - 0xfebfffff (0x400) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[14] -1	0	0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
	[15] -1	0	0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
	[16] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[20] -1	0	0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
	[21] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[22] -1	0	0x0000ee80 - 0x0000eebf (0x40) IX[B]
	[23] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[24] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[25] -1	0	0x0000ef60 - 0x0000ef6f (0x10) IX[B]
	[26] -1	0	0x0000efa8 - 0x0000efab (0x4) IX[B]
	[27] -1	0	0x0000efa0 - 0x0000efa7 (0x8) IX[B]
	[28] -1	0	0x0000efac - 0x0000efaf (0x4) IX[B]
	[29] -1	0	0x0000efe0 - 0x0000efe7 (0x8) IX[B]
	[30] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[31] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[32] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[33] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[34] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[35] -1	0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]
	[36] -1	0	0x0000ef40 - 0x0000ef5f (0x20) IX[B]
	[37] -1	0	0x0000ef20 - 0x0000ef3f (0x20) IX[B]
	[38] -1	0	0x0000ef00 - 0x0000ef1f (0x20) IX[B]
	[39] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfeafbc00 - 0xfeafbcff (0x100) MX[B]
	[5] -1	0	0xfeae0000 - 0xfeaeffff (0x10000) MX[B]
	[6] -1	0	0xfeafc000 - 0xfeafffff (0x4000) MX[B]
	[7] -1	0	0xfebff400 - 0xfebff4ff (0x100) MX[B]
	[8] -1	0	0xfebff800 - 0xfebff9ff (0x200) MX[B]
	[9] -1	0	0x50000000 - 0x500003ff (0x400) MX[B]
	[10] -1	0	0xfebffc00 - 0xfebfffff (0x400) MX[B]
	[11] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[12] -1	0	0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
	[13] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[14] -1	0	0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
	[15] -1	0	0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
	[16] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[23] -1	0	0x0000dfe0 - 0x0000dfe7 (0x8) IX[B]
	[24] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[25] -1	0	0x0000ee80 - 0x0000eebf (0x40) IX[B]
	[26] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[27] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[28] -1	0	0x0000ef60 - 0x0000ef6f (0x10) IX[B]
	[29] -1	0	0x0000efa8 - 0x0000efab (0x4) IX[B]
	[30] -1	0	0x0000efa0 - 0x0000efa7 (0x8) IX[B]
	[31] -1	0	0x0000efac - 0x0000efaf (0x4) IX[B]
	[32] -1	0	0x0000efe0 - 0x0000efe7 (0x8) IX[B]
	[33] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[34] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[35] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[36] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[37] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[38] -1	0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]
	[39] -1	0	0x0000ef40 - 0x0000ef5f (0x20) IX[B]
	[40] -1	0	0x0000ef20 - 0x0000ef3f (0x20) IX[B]
	[41] -1	0	0x0000ef00 - 0x0000ef1f (0x20) IX[B]
	[42] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
	[43] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[44] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xfe9f0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "8"
(**) RADEON(0): Option "AGPSize" "128"
(**) RADEON(0): Option "GARTSize" "64"
(**) RADEON(0): Option "RingSize" "8"
(**) RADEON(0): Option "BufferSize" "2"
(**) RADEON(0): Option "EnableDepthMoves" "yes"
(**) RADEON(0): Option "EnablePageFlip" "1"
(**) RADEON(0): Option "AccelDFS" "0"
(**) RADEON(0): Option "UseFBDev" "false"
(**) RADEON(0): Option "ColorTiling" "1"
(**) RADEON(0): Option "RenderAccel" "true"
(**) RADEON(0): Option "SubPixelOrder" "none"
(**) RADEON(0): Option "DynamicClocks" "on"
(**) RADEON(0): Option "AccelMethod" "XAA"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(**) RADEON(0): Option "mtrr" "on"
(--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): BIOS at 0xfe9c0000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.25.0
(**) RADEON(0): AGP 8x mode is configured
(II) RADEON(0): AGP Fast Write disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.1
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules//libi2c.so
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 1
(II) RADEON(0): EDID data from the display on port 2-----------------------
(II) RADEON(0): Manufacturer: GSM  Model: 4344  Serial#: 110676
(II) RADEON(0): Year: 2003  Week: 3
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Signal levels configurable
(II) RADEON(0): Sync:  Separate
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33  vert.: 25
(II) RADEON(0): Gamma: 2.85
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing not preferred mode in violation of standard!(II) RADEON(0): redX: 0.618 redY: 0.329   greenX: 0.295 greenY: 0.600
(II) RADEON(0): blueX: 0.144 blueY: 0.071   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 720x400@88Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@87Hz (interlaced)
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) RADEON(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) RADEON(0): #2: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) RADEON(0): #3: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) RADEON(0): #4: hsize: 1024  vsize 768  refresh: 70  vid: 19041
(II) RADEON(0): #5: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) RADEON(0): #6: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) RADEON(0): #7: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 94.5 MHz   Image Size:  310 x 230 mm
(II) RADEON(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  315 x 230 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 71 kHz, PixClock max 110 MHz
(II) RADEON(0): Monitor name: F700B
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff001e6d444354b00100
(II) RADEON(0): 	030d0103182119b9e85ad99e544b9924
(II) RADEON(0): 	12484cfffe80314f3159454f4559614a
(II) RADEON(0): 	614f61598180ea240060410028303060
(II) RADEON(0): 	130036e61000001e302a009851002a40
(II) RADEON(0): 	307013003be61000001e000000fd0032
(II) RADEON(0): 	a01e470b000a202020202020000000fc
(II) RADEON(0): 	0046373030420a202020202020200095
(II) RADEON(0): 
(II) RADEON(0): Primary:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=50000; xclk=29700
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): LGF700B: Using hsync range of 30.00-70.00 kHz
(II) RADEON(0): LGF700B: Using vrefresh range of 50.00-160.00 Hz
(II) RADEON(0): Clock range:  20.00 to 500.00 MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x800" (hsync out of range)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1080" (hsync out of range)
(II) RADEON(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1080" (hsync out of range)
(II) RADEON(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1080" (hsync out of range)
(II) RADEON(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2560x1600" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1080" (width too large for virtual size)

d2_racing · Message par **d2_racing** » dim. 20 mai 2007, 17:26

Code : Tout sélectionner

(II) RADEON(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1440x900" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x960" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1360x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x800" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x800" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x800" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x864" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x768" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x720" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x720" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x720" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1280x720" (width too large for virtual size)
(II) RADEON(0): Not using default mode "1152x768" (width too large for virtual size)
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) RAD

Code : Tout sélectionner

sylvain@ArchLinux ~]$ cat /var/log/Xorg.0.log | grep -i agp
        ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
        ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
        ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
        ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
        ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
        ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
        ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
        ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
        ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
        ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
        ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
        ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
        ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
        ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
        ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
        ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
        ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
        ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
        ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
        ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
        ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
        ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
        ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
        ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
        ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP),
        ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
        ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
        ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
        ATI FireGL RV360 AV (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
        ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
        ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
        ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
        ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
        ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
        ATI Radeon AIW X800 VE (R420) JT (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(--) Chipset ATI Radeon 9600 AP (AGP) found
(**) RADEON(0): Option "AGPMode" "8"
(**) RADEON(0): Option "AGPSize" "128"
(--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
(II) RADEON(0): AGP card detected
(**) RADEON(0): AGP 8x mode is configured
(II) RADEON(0): AGP Fast Write disabled by default
(WW) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
(II) RADEON(0): [agp] You may want to make sure the agpgart kernel module
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
[sylvain@ArchLinux ~]$

Voici mon fichier /etc/X11/xorg.conf

Code : Tout sélectionner

[sylvain@ArchLinux ~]$ cat /etc/X11/xorg.conf
# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension
    Load  "i2c"     # ajout

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"
    Load  "int10"   # ajout
    Load  "vbe"     # ajout
EndSection

Section "Extensions"
        Option "RENDER" "Enable"
EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath    "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/100dpi:unscaled"
    FontPath   "/usr/share/fonts/75dpi:unscaled"
#    FontPath   "/usr/share/fonts/TTF"
#    FontPath   "/usr/share/fonts/Type1"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc105"
    Option "XkbLayout"  "ca"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "Auto" # Auto detect
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "LGF700B"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30.0 - 70.0

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50 - 160

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks     25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "RADEON9600PRO"
    Driver      "radeon"
    Option  "DRI"           "true"
        Option  "AccelMethod"   "XAA"   # utilise l'architecture d'accélération XFree86
        Option  "AccelDFS"      "0"     # mettre "0" si la carte est une AGP
        Option  "AGPMode"       "8"     # pour carte AGP seulement
        Option  "AGPSize"       "128"   # pour carte AGP seulement
        Option  "GARTSize"      "64"
        Option  "RingSize"      "8"
        Option  "BufferSize"    "2"
        Option  "EnablePageFlip" "1"    # active 'page flipping' pour les applis 3D
        Option  "EnableDepthMoves" "yes"
        Option  "UseFBDev"      "false"
        Option  "ColorTiling"   "1"
        Option  "RenderAccel"   "true"  # Active l'accélération matériel
        Option  "mtrr"  "on"
        Option  "SubPixelOrder" "none"
        Option  "DPMS"
        Option  "DynamicClocks" "on"
    #VideoRam    131072
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "RADEON9600PRO"
    Monitor     "LGF700B"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
  Mode 0666
EndSection

[sylvain@ArchLinux ~]$

[

Voici mon lspci :

Code : Tout sélectionner

[[root@ArchLinux ~]# lshwd
00:00.0 Host bridge: Intel Corp.|82865G [Springdale-G] Chipset Host Bridge (intel-agp)
00:01.0 PCI bridge: Intel Corp.|82865G/PE/P Processor to AGP Controller (unknown)
00:1d.0 USB Controller: Intel Corp.|USB Controller (uhci_hcd)
00:1d.1 USB Controller: Intel Corp.|USB Controller (uhci_hcd)
00:1d.2 USB Controller: Intel Corp.|USB Controller (uhci_hcd)
00:1d.3 USB Controller: Intel Corp.|82801EB USB EHCI Controller #2 (uhci_hcd)
00:1d.7 USB Controller: Intel Corp.|USB Enhanced Controller (ehci-hcd)
00:1e.0 PCI bridge: Intel Corp.|82820 815e (Camino 2) Chipset PCI (hw_random)
00:1f.0 ISA bridge: Intel Corp.|82801EB ISA Bridge (LPC) (i810-tco)
00:1f.1 IDE interface: Intel Corp.|82801EB ICH5 IDE (ata_piix)
00:1f.2 IDE interface: Intel Corp.|82801EB ICH5 IDE (SATA) (ata_piix)
00:1f.3 SMBus: Intel Corp.|82801EB SMBus (i2c-i801)
00:1f.5 Multimedia audio controller: Intel Corp.|82801EB AC'97 Audio (snd-intel8x0)
01:00.0 VGA compatible controller: ATI Technologies Inc.|Radeon 9600 AP (AGP) (ati)
01:00.1 Display controller: ATI Technologies Inc.|RV350 AP [Radeon 9600] (Secondary) (vesa)
02:05.0 Ethernet controller: 3Com Corp.|3C940 10/100/1000 LAN (skge)
02:0a.0 Communication controller: Conexant Systems Inc.|HCF Data/Fax/Remote TAM/Speakerphone (unknown)
02:0b.0 Ethernet controller: D-Link System Inc.|DFE 530 TX+ Fast Ethernet Adapter (8139too)
003:002 USB Printer: Hewlett-Packard|DeskJet 3820 (usblp)
003:001 USB Hub: Virtual|Hub (hub)
005:001 USB Hub: Virtual|Hub (hub)
004:001 USB Hub: Virtual|Hub (hub)
002:001 USB Hub: Virtual|Hub (hub)
001:003 USB Vendor Specific Class: ? (unknown)
001:001 USB Hub: Virtual|Hub (hub)
---:--- Mouse: Generic PS/2 Wheel Mouse [/dev/psaux] (msintellips/2)

Message par **warnaud** » dim. 20 mai 2007, 17:43

d2_racing a écrit : J'ai une erreur a propos de agpgart...vu que je sais pas comment compilé, est-ce que le problème vient de là...

Tu t'es compilé un noyau sous arch ?
Si oui vérifie que le module agpgaart est lancé ou compilé en dur.

Sinon je laisse les spécialiste d'ATi te répondre

Message par **wain** » dim. 20 mai 2007, 18:25

ouh la oui il faut un spécialiste ATI là...

sinon, sur le dépôt [archlinuxfr] il y a un programme nommé pastebin qui permet de publier un texte de deux manières:

Code : Tout sélectionner

lshwd | pastebin

ou

Code : Tout sélectionner

pastebin /var/log/Xorg.0.log

Ca permet de pas trop surcharger le forum

d2_racing · Message par **d2_racing** » dim. 20 mai 2007, 20:53

warnaud a écrit :
d2_racing a écrit : J'ai une erreur a propos de agpgart...vu que je sais pas comment compilé, est-ce que le problème vient de là...
Tu t'es compilé un noyau sous arch ?
Si oui vérifie que le module agpgaart est lancé ou compilé en dur.

Sinon je laisse les spécialiste d'ATi te répondre

Non, c'est le noyau stock de Arch...j'ai rien fait encore, je roule avec le 2.6.21

vincentxavier · Message par **vincentxavier** » dim. 20 mai 2007, 22:44

que dit modprobe agpgart ?

d2_racing · Message par **d2_racing** » dim. 20 mai 2007, 22:49

Il charge, sauf quand je relance X, avec /etc/rc.d/kdm stop, /etc/rc.d/kdm start, j'ai toujours pas de dri avec glxinfo.

marc[i1] · Message par **marc[i1]** » lun. 21 mai 2007, 11:23

J'ai une carte ATI 9600 et il existe une page de wiki pour le pilote libre radeon :
http://wiki.archlinux.fr/howto:video:ati

Regarde déjà si tu as bien tout les pkg !
Je vérifierais ce soir les pkg et les modules chargés sur ma machine !

_alexmyself · Message par **_alexmyself** » lun. 21 mai 2007, 12:19

moi je mise sur une methode minimaliste du xorg.conf et ca marche nickel:

Code : Tout sélectionner

Section "ServerLayout"
	Identifier	"Xorg Configured"
	Screen	0	"Screen-radeon"	0 0
	InputDevice	"keyboard_fr"	"CoreKeyboard"
	InputDevice	"touchpad"	"AlwaysCore"
	#pour beryl / radeon
	Option 		"AIGLX" 	"true"
EndSection


Section "ServerFlags"
	Option "AllowMouseOpenFail"  "true"
EndSection




Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc:unscaled"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/75dpi"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/100dpi"

# Additional fonts: Locale, Gimp, TTF...
	FontPath     "/usr/share/fonts/cyrillic"

# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/TTF
EndSection



Section "Module"
	#touchpad
	Load  "synaptics"

	Load  "extmod"

# charger si driver radeon
	Load  "glx"
	Load  "dri"
EndSection






Section "InputDevice"
	Identifier  "keyboard_fr"
	Driver      "keyboard"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr-latin9"
	Option	    "XkbVariant" "nodeadkeys"
EndSection


Section "InputDevice"
  Driver  	"synaptics"
  Identifier  	"touchpad"
  Option	"Device"  		"/dev/psaux"
  Option	"Protocol"		"auto-dev"
  Option	"LeftEdge"		"120"
  Option	"RightEdge"		"830"
  Option	"TopEdge"		"120"
  Option	"BottomEdge"		"650"
  Option	"FingerLow"		"14"
  Option	"FingerHigh"		"15"
  Option	"MaxTapTime"		"180"
  Option	"MaxTapMove"		"110"
  Option	"EmulateMidButtonTime"	"75"
  Option	"VertScrollDelta"	"20"
  Option	"HorizScrollDelta"	"20"
  Option	"MinSpeed"		"0.3"
  Option	"MaxSpeed"		"0.75"
  Option	"AccelFactor"		"0.015"
  Option	"EdgeMotionMinSpeed"	"200"
  Option	"EdgeMotionMaxSpeed"	"200"
  Option	"UpDownScrolling"	"1"
  Option	"CircularScrolling"	"1"
  Option	"CircScrollDelta"	"0.1"
  Option	"CircScrollTrigger"	"2"
EndSection




############################################################################################
# RADEON
############################################################################################
Section "Monitor"
	Identifier	"Monitor-radeon"
	VendorName	"Monitor toshiba"
	ModelName	"LCD 1280x800"
	# la formule du displaysize: (1280 x 25,4) / 75 ou 96, arrondir a l'inférieur, évite les problèmes de polices
	DisplaySize	432 270
EndSection

Section "Device"
	Identifier	"Videocard-radeon"
	Driver		"radeon"
	VendorName	"ATI"
	BoardName	"ATI Mobility Radeon 9700"
	Option		"AGPMode"	"4"

	#pour beryl
	Option "XAANoOffscreenPixmaps" "true"
EndSection

Section "Screen"
	Identifier "Screen-radeon"
	Device     "Videocard-radeon"
	Monitor    "Monitor-radeon"
EndSection

#pour beryl
Section "Extensions"
  Option "Composite" "Enable"
EndSection
############################################################################################
# /RADEON
############################################################################################






############################################################################################
# FGLRX
############################################################################################
Section "Monitor"
	Identifier "Monitor-fglrx"
	VendorName   "Monitor toshiba"
	ModelName    "LCD 1280x800"
EndSection


Section "Device"
	Identifier  "Videocard-fglrx"
	Driver      "fglrx"
EndSection


Section "Screen"
	Identifier "Screen-fglrx"
	Device     "Videocard-fglrx"
	Monitor    "Monitor-fglrx"
	DefaultColorDepth 24
EndSection

#__pour xgl
#Section "Extensions"
#	Option "Composite" "Disable"
#EndSection
############################################################################################
# /FGLRX
############################################################################################

la section fglrx ne sert a rien avec le driver radeon je la garde pour pouvoir changer rapidement de driver

vincentxavier · Message par **vincentxavier** » mar. 22 mai 2007, 11:37

ATI a écrit :PCI GART Support
Users experiencing problems with the AGP GART Module can use the PCI GART module and enable the feature in the driver by making the "BusType" option "PCI" in the Video Card Device section. To do this follow these steps:
Edit the X Server configuration file (/etc/X11/XF86Config or /etc/X11/xorg.conf
Navigate to the fglrx device section
Add the following line: Option "BusType" "PCI"
You have successfully enabled the PCI GART for the ATI Proprietary Linux Driver.

A essayer, on ne sait jamais

mélodie · Message par **mélodie** » mer. 23 mai 2007, 00:18

X Window System Version 7.2.0
Release Date: 22 January 2007

ça c'est le début de ton log.

http://ati.amd.com/support/drivers/linu ... adeon.html

Automated installer and Display Drivers for XFree86 4.3 and X.Org 6.7, 6.8, 6.9, 7.0, 7.1

Ça, c'est ce que fournit actuellement ATI pour les radeon 9600.

Sous Gentoo ou Debian étais-tu aussi up-to-date avec xfree-86 ou xorg ?

marc[i1] · Message par **marc[i1]** » mer. 23 mai 2007, 08:29

Le monsieur utilise le pilote libre

d2_racing · Message par **d2_racing** » mer. 23 mai 2007, 19:18

Oui, j'utilise X.ORG 7.2 avec le driver Open source sous Gentoo et mon DRI fonctionne #1.

Sous Arch aussi, je me sers de X.ORG 7.2 avec le driver open source aussi.

Ça doit venir du noyau surement...car j'ai mis les mêmes setting que mon Gentoo et ça fonctionne toujours pas.

Message par **warnaud** » mer. 23 mai 2007, 20:05

tu peux tester ça à la rache® en copiant ton noyau sous arch, tu seras fixer direct mais ça me parait bizarre car d'autres personnes utilisent le driver libre

d2_racing · Message par **d2_racing** » jeu. 24 mai 2007, 13:56

Voici mon kernel sous gentoo :
http://www.gentoo-quebec.org/Config_Syl ... config.txt

Voici la section qui est importante :

Code : Tout sélectionner

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

Je vois pas la différence entre le kernel qui est sur le CVS :

http://cvs.archlinux.org/cgi-bin/viewcv ... ag=CURRENT

d2_racing · Message par **d2_racing** » jeu. 24 mai 2007, 14:00

Voici ma config en .pdf :

http://www.gentoo-quebec.org/Config_Syl ... Gentoo-r5/

d2_racing · Message par **d2_racing** » sam. 26 mai 2007, 08:37

J'ai ajouté le support de mon AGP en dur et j'ai recompilé le tout et j'ai un beau dri...

Code : Tout sélectionner

[sylvain@ArchLinux ~]$ glxgears
17006 frames in 5.0 seconds = 3401.185 FPS
23243 frames in 5.0 seconds = 4648.588 FPS
23566 frames in 5.0 seconds = 4713.164 FPS

Code : Tout sélectionner

[sylvain@ArchLinux ~]$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R300 20060815 AGP 1x x86/MMX/SSE2 TCL
OpenGL version string: 1.3 Mesa 6.5.2
OpenGL extensions:
    GL_ARB_fragment_program, GL_ARB_imaging, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_compression, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
    GL_MESAX_texture_float, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_gpu_program_parameters,
    GL_EXT_histogram, GL_EXT_packed_pixels, GL_EXT_polygon_offset,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
    GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
    GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x26 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x27 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x29 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2c 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2e 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2f 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x31 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
[sylvain@ArchLinux ~]$

d2_racing · Message par **d2_racing** » lun. 28 mai 2007, 18:38

Tout est résolu en fait

Message par **warnaud** » lun. 28 mai 2007, 19:55

Génial ! Tant mieux

d2_racing · Message par **d2_racing** » sam. 08 sept. 2007, 05:23

Petite maj, avec le noyau 2.6.22 de arch sans rien toucher je suis rendu avec le DRI.

Alors, on dirait que le problème s'est réglé par lui même.

Arch Linux

Archlinux.fr [Forums]

[DRI] fonctionne pas avec ma Radeon 9600[Résolu]

[DRI] fonctionne pas avec ma Radeon 9600[Résolu]

Re: [DRI] fonctionne pas avec ma Radeon 9600

Re: [DRI] fonctionne pas avec ma Radeon 9600