[Manette] Pilote Razer Onza TE

[Silejonu]

Bonjour,
J'ai fait l'acquisition d'une manette Razer Onza Tournament Edition.
Ayant lu quelque part qu'elle était reconnue comme une manette XBox 360 officielle sur la console éponyme, j'ai naïvement pensé qu'il en serait de même sur un ordinateur.
J'ai donc branché ma manette, sans aucun pilote supplémentaire installé, ça n'a pas marché. J'ai ensuite essayé avec : xboxdrv & xf86-input-joystick, sans succès.
Ai-je loupé quelque chose, ou bien dois-je faire une croix sur ma manette pour le moment ?

[FoolEcho]

Tu peux déjà voir du côté des logs de X (/var/log/Xorg.*.log) comment elle est détectée... et éventuellement installe hwinfo et poste-nous hwinfo --joystick pour plus d'infos.

[Silejonu]

Je n'ai rien trouvé de probant dans les logs de X.
Avec "hwinfo --joystick" non plus. Par contre, avec hwinfo seul, je trouve :

Code : Tout sélectionner

71: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: 2jVo.DXF76cW4iFB
  Parent ID: BSFT.erpEvbsFWX1
  SysFS ID: /devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.0
  SysFS BusID: 7-2:1.0
  Hardware Class: unknown
  Model: "Razer XBOX360 GAMEPAD"
  Hotplug: USB
  Vendor: usb 0x1689 "Razer"
  Device: usb 0xfd00 "XBOX360 GAMEPAD"
  Revision: "1.24"
  Serial ID: "06AD9878"
  Speed: 12 Mbps
  Module Alias: "usb:v1689pFD00d0124dcFFdscFFdpFFicFFisc5Dip01"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #59 (Hub)  

[benjarobin]

Peux tu nous donner l'intégralité du log de Xorg situé dans /var/log
Car apparemment le problème c'est que ta manette n'est pas considéré comme un joystick, on peut, peut être l'aider

[Silejonu]

Voilà voilà :

Code : Tout sélectionner

 [     6.391] 
X.Org X Server 1.11.1
Release Date: 2011-09-24
[     6.391] X Protocol Version 11, Revision 0
[     6.391] Build Operating System: Linux 3.0-ARCH x86_64 
[     6.391] Current Operating System: Linux bigZ 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64
[     6.391] Kernel command line: root=/dev/sda6 ro
[     6.391] Build Date: 10 October 2011  08:55:30AM
[     6.391]  
[     6.391] Current version of pixman: 0.22.2
[     6.391] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.391] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.392] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 13:08:52 2011
[     6.392] (==) Using config file: "/etc/X11/xorg.conf"
[     6.392] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     6.393] (==) ServerLayout "Layout0"
[     6.393] (**) |-->Screen "Screen0" (0)
[     6.393] (**) |   |-->Monitor "Monitor0"
[     6.394] (**) |   |-->Device "Device0"
[     6.394] (**) |-->Input Device "Keyboard0"
[     6.394] (**) |-->Input Device "Mouse0"
[     6.394] (==) Automatically adding devices
[     6.394] (==) Automatically enabling devices
[     6.402] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     6.403] 	Entry deleted from font path.
[     6.403] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     6.403] 	Entry deleted from font path.
[     6.403] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     6.403] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     6.403] 	Entry deleted from font path.
[     6.403] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     6.403] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     6.403] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.403] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     6.403] (WW) Disabling Keyboard0
[     6.403] (WW) Disabling Mouse0
[     6.403] (II) Loader magic: 0x7ccae0
[     6.403] (II) Module ABI versions:
[     6.403] 	X.Org ANSI C Emulation: 0.4
[     6.403] 	X.Org Video Driver: 11.0
[     6.403] 	X.Org XInput driver : 13.0
[     6.403] 	X.Org Server Extension : 6.0
[     6.404] (--) PCI:*(0:5:0:0) 10de:1200:10b0:0801 rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[     6.404] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     6.404] (II) LoadModule: "extmod"
[     6.406] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[     6.407] (II) Module extmod: vendor="X.Org Foundation"
[     6.407] 	compiled for 1.11.1, module version = 1.0.0
[     6.407] 	Module class: X.Org Server Extension
[     6.407] 	ABI class: X.Org Server Extension, version 6.0
[     6.407] (II) Loading extension MIT-SCREEN-SAVER
[     6.407] (II) Loading extension XFree86-VidModeExtension
[     6.407] (II) Loading extension XFree86-DGA
[     6.407] (II) Loading extension DPMS
[     6.407] (II) Loading extension XVideo
[     6.407] (II) Loading extension XVideo-MotionCompensation
[     6.407] (II) Loading extension X-Resource
[     6.407] (II) LoadModule: "dbe"
[     6.409] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[     6.409] (II) Module dbe: vendor="X.Org Foundation"
[     6.409] 	compiled for 1.11.1, module version = 1.0.0
[     6.409] 	Module class: X.Org Server Extension
[     6.409] 	ABI class: X.Org Server Extension, version 6.0
[     6.409] (II) Loading extension DOUBLE-BUFFER
[     6.409] (II) LoadModule: "glx"
[     6.409] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.481] (II) Module glx: vendor="NVIDIA Corporation"
[     6.482] 	compiled for 4.0.2, module version = 1.0.0
[     6.482] 	Module class: X.Org Server Extension
[     6.482] (II) NVIDIA GLX Module  285.05.09  Fri Sep 23 17:51:24 PDT 2011
[     6.482] (II) Loading extension GLX
[     6.482] (II) LoadModule: "record"
[     6.482] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[     6.483] (II) Module record: vendor="X.Org Foundation"
[     6.483] 	compiled for 1.11.1, module version = 1.13.0
[     6.483] 	Module class: X.Org Server Extension
[     6.483] 	ABI class: X.Org Server Extension, version 6.0
[     6.483] (II) Loading extension RECORD
[     6.483] (II) LoadModule: "dri"
[     6.483] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[     6.484] (II) Module dri: vendor="X.Org Foundation"
[     6.484] 	compiled for 1.11.1, module version = 1.0.0
[     6.484] 	ABI class: X.Org Server Extension, version 6.0
[     6.484] (II) Loading extension XFree86-DRI
[     6.484] (II) LoadModule: "dri2"
[     6.484] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     6.485] (II) Module dri2: vendor="X.Org Foundation"
[     6.485] 	compiled for 1.11.1, module version = 1.2.0
[     6.485] 	ABI class: X.Org Server Extension, version 6.0
[     6.485] (II) Loading extension DRI2
[     6.485] (II) LoadModule: "nvidia"
[     6.487] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.492] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.492] 	compiled for 4.0.2, module version = 1.0.0
[     6.492] 	Module class: X.Org Video Driver
[     6.494] (II) NVIDIA dlloader X Driver  285.05.09  Fri Sep 23 17:33:35 PDT 2011
[     6.494] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.494] (++) using VT number 7

[     6.499] (II) Loading sub module "fb"
[     6.499] (II) LoadModule: "fb"
[     6.499] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.500] (II) Module fb: vendor="X.Org Foundation"
[     6.500] 	compiled for 1.11.1, module version = 1.0.0
[     6.500] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.500] (II) Loading sub module "wfb"
[     6.500] (II) LoadModule: "wfb"
[     6.500] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.501] (II) Module wfb: vendor="X.Org Foundation"
[     6.501] 	compiled for 1.11.1, module version = 1.0.0
[     6.501] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.501] (II) Loading sub module "ramdac"
[     6.501] (II) LoadModule: "ramdac"
[     6.501] (II) Module "ramdac" already built-in
[     6.502] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.502] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.502] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.502] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     6.502] (==) NVIDIA(0): RGB weight 888
[     6.502] (==) NVIDIA(0): Default visual is TrueColor
[     6.502] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.449] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[     7.449] (II) NVIDIA(GPU-0):     3D Vision stereo.
[     7.450] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:5:0:0 (GPU-0)
[     7.450] (--) NVIDIA(0): Memory: 1048576 kBytes
[     7.450] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00
[     7.450] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.450] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[     7.450] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at
[     7.450] (--) NVIDIA(0):     PCI:5:0:0
[     7.450] (--) NVIDIA(0):     Samsung SyncMaster (DFP-0)
[     7.450] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[     7.450] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[     7.471] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[     7.471] (**) NVIDIA(0):     enabled on all display devices.
[     7.494] (II) NVIDIA(0): Assigned Display Device: DFP-0
[     7.494] (==) NVIDIA(0): 
[     7.494] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     7.494] (==) NVIDIA(0):     will be used as the requested mode.
[     7.494] (==) NVIDIA(0): 
[     7.494] (II) NVIDIA(0): Validated modes:
[     7.494] (II) NVIDIA(0):     "nvidia-auto-select"
[     7.494] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     7.524] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[     7.524] (--) NVIDIA(0):     option
[     7.524] (--) Depth 24 pixmap format is 32 bpp
[     7.524] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[     7.524] (II) NVIDIA:     access.
[     7.527] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     7.527] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     7.527] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     7.527] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     7.527] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     7.527] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     7.527] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     7.527] (II) NVIDIA(0):     Config Options in the README.
[     7.530] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[     7.574] (II) Loading extension NV-GLX
[     7.632] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.632] (==) NVIDIA(0): Backing store disabled
[     7.632] (==) NVIDIA(0): Silken mouse enabled
[     7.632] (**) NVIDIA(0): DPMS enabled
[     7.632] (II) Loading extension NV-CONTROL
[     7.633] (II) Loading extension XINERAMA
[     7.633] (II) Loading sub module "dri2"
[     7.633] (II) LoadModule: "dri2"
[     7.633] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     7.633] (II) Module dri2: vendor="X.Org Foundation"
[     7.633] 	compiled for 1.11.1, module version = 1.2.0
[     7.633] 	ABI class: X.Org Server Extension, version 6.0
[     7.633] (II) NVIDIA(0): [DRI2] Setup complete
[     7.633] (==) RandR enabled
[     7.633] (II) Initializing built-in extension Generic Event Extension
[     7.633] (II) Initializing built-in extension SHAPE
[     7.633] (II) Initializing built-in extension MIT-SHM
[     7.633] (II) Initializing built-in extension XInputExtension
[     7.633] (II) Initializing built-in extension XTEST
[     7.633] (II) Initializing built-in extension BIG-REQUESTS
[     7.633] (II) Initializing built-in extension SYNC
[     7.633] (II) Initializing built-in extension XKEYBOARD
[     7.633] (II) Initializing built-in extension XC-MISC
[     7.633] (II) Initializing built-in extension SECURITY
[     7.633] (II) Initializing built-in extension XINERAMA
[     7.633] (II) Initializing built-in extension XFIXES
[     7.633] (II) Initializing built-in extension RENDER
[     7.633] (II) Initializing built-in extension RANDR
[     7.633] (II) Initializing built-in extension COMPOSITE
[     7.633] (II) Initializing built-in extension DAMAGE
[     7.634] (II) Initializing extension GLX
[     7.694] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     7.694] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.694] (II) LoadModule: "evdev"
[     7.694] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.695] (II) Module evdev: vendor="X.Org Foundation"
[     7.695] 	compiled for 1.10.99.902, module version = 2.6.0
[     7.695] 	Module class: X.Org XInput Driver
[     7.695] 	ABI class: X.Org XInput driver, version 13.0
[     7.695] (II) Using input driver 'evdev' for 'Power Button'
[     7.695] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.695] (**) Power Button: always reports core events
[     7.695] (**) Power Button: Device: "/dev/input/event1"
[     7.695] (--) Power Button: Found keys
[     7.695] (II) Power Button: Configuring as keyboard
[     7.695] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     7.695] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.695] (**) Option "xkb_rules" "evdev"
[     7.695] (**) Option "xkb_model" "tm2030USB-102"
[     7.695] (**) Option "xkb_layout" "fr"
[     7.695] (**) Option "xkb_variant" "bepo"
[     7.695] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.714] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     7.714] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.714] (II) Using input driver 'evdev' for 'Power Button'
[     7.714] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.714] (**) Power Button: always reports core events
[     7.714] (**) Power Button: Device: "/dev/input/event0"
[     7.714] (--) Power Button: Found keys
[     7.714] (II) Power Button: Configuring as keyboard
[     7.714] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[     7.714] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.714] (**) Option "xkb_rules" "evdev"
[     7.714] (**) Option "xkb_model" "tm2030USB-102"
[     7.714] (**) Option "xkb_layout" "fr"
[     7.714] (**) Option "xkb_variant" "bepo"
[     7.714] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.714] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event3)
[     7.714] (II) No input driver/identifier specified (ignoring)
[     7.715] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event4)
[     7.715] (II) No input driver/identifier specified (ignoring)
[     7.715] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event5)
[     7.715] (II) No input driver/identifier specified (ignoring)
[     7.715] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event6)
[     7.715] (II) No input driver/identifier specified (ignoring)
[     7.715] (II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
[     7.715] (**) Logitech G500: Applying InputClass "LogitechG500"
[     7.715] (II) Using input driver 'evdev' for 'Logitech G500'
[     7.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.715] (**) Logitech G500: always reports core events
[     7.715] (**) Logitech G500: Device: "/dev/input/event7"
[     7.715] (--) Logitech G500: Found 20 mouse buttons
[     7.715] (--) Logitech G500: Found scroll wheel(s)
[     7.715] (--) Logitech G500: Found relative axes
[     7.715] (--) Logitech G500: Found x and y relative axes
[     7.715] (II) Logitech G500: Configuring as mouse
[     7.715] (II) Logitech G500: Adding scrollwheel support
[     7.715] (**) Logitech G500: YAxisMapping: buttons 4 and 5
[     7.715] (**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.715] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/input/input7/event7"
[     7.715] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE, id 8)
[     7.715] (II) Logitech G500: initialized for relative axes.
[     7.715] (**) Logitech G500: (accel) keeping acceleration scheme 1
[     7.715] (**) Logitech G500: (accel) acceleration profile 0
[     7.715] (**) Logitech G500: (accel) acceleration factor: 2.000
[     7.715] (**) Logitech G500: (accel) acceleration threshold: 4
[     7.715] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
[     7.715] (II) No input driver/identifier specified (ignoring)
[     7.716] (II) config/udev: Adding input device Logitech G500 (/dev/input/event9)
[     7.716] (**) Logitech G500: Applying InputClass "evdev keyboard catchall"
[     7.716] (II) Using input driver 'evdev' for 'Logitech G500'
[     7.716] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.716] (**) Logitech G500: always reports core events
[     7.716] (**) Logitech G500: Device: "/dev/input/event9"
[     7.716] (--) Logitech G500: Found 1 mouse buttons
[     7.716] (--) Logitech G500: Found scroll wheel(s)
[     7.716] (--) Logitech G500: Found relative axes
[     7.716] (--) Logitech G500: Found absolute axes
[     7.716] (--) Logitech G500: Found keys
[     7.716] (II) Logitech G500: Configuring as mouse
[     7.716] (II) Logitech G500: Configuring as keyboard
[     7.716] (II) Logitech G500: Adding scrollwheel support
[     7.716] (**) Logitech G500: YAxisMapping: buttons 4 and 5
[     7.716] (**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/input/input9/event9"
[     7.716] (II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD, id 9)
[     7.716] (**) Option "xkb_rules" "evdev"
[     7.716] (**) Option "xkb_model" "tm2030USB-102"
[     7.716] (**) Option "xkb_layout" "fr"
[     7.716] (**) Option "xkb_variant" "bepo"
[     7.716] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.716] (EE) Logitech G500: failed to initialize for relative axes.
[     7.716] (II) Logitech G500: initialized for absolute axes.
[     7.716] (**) Logitech G500: (accel) keeping acceleration scheme 1
[     7.716] (**) Logitech G500: (accel) acceleration profile 0
[     7.716] (**) Logitech G500: (accel) acceleration factor: 2.000
[     7.716] (**) Logitech G500: (accel) acceleration threshold: 4
[     7.716] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event10)
[     7.716] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
[     7.716] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard'
[     7.716] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.716] (**) TypeMatrix.com USB Keyboard: always reports core events
[     7.716] (**) TypeMatrix.com USB Keyboard: Device: "/dev/input/event10"
[     7.716] (--) TypeMatrix.com USB Keyboard: Found keys
[     7.716] (II) TypeMatrix.com USB Keyboard: Configuring as keyboard
[     7.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/input/input10/event10"
[     7.716] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 10)
[     7.716] (**) Option "xkb_rules" "evdev"
[     7.716] (**) Option "xkb_model" "tm2030USB-102"
[     7.716] (**) Option "xkb_layout" "fr"
[     7.716] (**) Option "xkb_variant" "bepo"
[     7.716] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.717] (II) config/udev: Adding input device TypeMatrix.com USB Keyboard (/dev/input/event11)
[     7.717] (**) TypeMatrix.com USB Keyboard: Applying InputClass "evdev keyboard catchall"
[     7.717] (II) Using input driver 'evdev' for 'TypeMatrix.com USB Keyboard'
[     7.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.717] (**) TypeMatrix.com USB Keyboard: always reports core events
[     7.717] (**) TypeMatrix.com USB Keyboard: Device: "/dev/input/event11"
[     7.717] (--) TypeMatrix.com USB Keyboard: Found 1 mouse buttons
[     7.717] (--) TypeMatrix.com USB Keyboard: Found scroll wheel(s)
[     7.717] (--) TypeMatrix.com USB Keyboard: Found relative axes
[     7.717] (--) TypeMatrix.com USB Keyboard: Found absolute axes
[     7.717] (--) TypeMatrix.com USB Keyboard: Found keys
[     7.717] (II) TypeMatrix.com USB Keyboard: Configuring as mouse
[     7.717] (II) TypeMatrix.com USB Keyboard: Configuring as keyboard
[     7.717] (II) TypeMatrix.com USB Keyboard: Adding scrollwheel support
[     7.717] (**) TypeMatrix.com USB Keyboard: YAxisMapping: buttons 4 and 5
[     7.717] (**) TypeMatrix.com USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.717] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/input/input11/event11"
[     7.717] (II) XINPUT: Adding extended input device "TypeMatrix.com USB Keyboard" (type: KEYBOARD, id 11)
[     7.717] (**) Option "xkb_rules" "evdev"
[     7.717] (**) Option "xkb_model" "tm2030USB-102"
[     7.717] (**) Option "xkb_layout" "fr"
[     7.717] (**) Option "xkb_variant" "bepo"
[     7.717] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.717] (EE) TypeMatrix.com USB Keyboard: failed to initialize for relative axes.
[     7.717] (II) TypeMatrix.com USB Keyboard: initialized for absolute axes.
[     7.717] (**) TypeMatrix.com USB Keyboard: (accel) keeping acceleration scheme 1
[     7.717] (**) TypeMatrix.com USB Keyboard: (accel) acceleration profile 0
[     7.717] (**) TypeMatrix.com USB Keyboard: (accel) acceleration factor: 2.000
[     7.717] (**) TypeMatrix.com USB Keyboard: (accel) acceleration threshold: 4
[     7.717] (II) config/udev: Adding input device Webcam C170 (/dev/input/event8)
[     7.717] (**) Webcam C170: Applying InputClass "evdev keyboard catchall"
[     7.717] (II) Using input driver 'evdev' for 'Webcam C170'
[     7.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.718] (**) Webcam C170: always reports core events
[     7.718] (**) Webcam C170: Device: "/dev/input/event8"
[     7.718] (--) Webcam C170: Found keys
[     7.718] (II) Webcam C170: Configuring as keyboard
[     7.718] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input8/event8"
[     7.718] (II) XINPUT: Adding extended input device "Webcam C170" (type: KEYBOARD, id 12)
[     7.718] (**) Option "xkb_rules" "evdev"
[     7.718] (**) Option "xkb_model" "tm2030USB-102"
[     7.718] (**) Option "xkb_layout" "fr"
[     7.718] (**) Option "xkb_variant" "bepo"
[     7.718] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.718] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[     7.718] (II) No input driver/identifier specified (ignoring)
 

[benjarobin]

Hum, en effet aucun référence même obscure, je crains le pire.
Peux tu faire ceci :
- Débrancher ta manette
- tail -f /var/log/everything.log (La commande reste bloquée en attente, tu peux appuyer sur la touche entrée pour bien délimiter avec ce qu'il y avait avant)
- Branche ta manette
- Donne nous la contenu de ce qui c'est affiché après les sauts de lignes de la commande précédente
- Appuie sur ctrl+C pour terminer la commande tail

[Silejonu]

Hop, voilà ce que je reçois :

Code : Tout sélectionner

Oct 20 13:52:42 localhost kernel: [ 2636.269799] usb 7-2: new full speed USB device number 4 using ohci_hcd
Oct 20 13:52:42 localhost mtp-probe: checking bus 7, device 4: "/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2"
Oct 20 13:52:43 localhost mtp-probe: bus: 7, device: 4 was not an MTP device

[benjarobin]

Je crains que ce soit "mort", je laisse la main à quelqu'un de plus expérimenté...

[Silejonu]

Bon, ben me reste plus qu'à attendre…
Merci pour l'aide, en tout cas.

[FoolEcho]

Dans la mesure où le hwinfo ciblé sur le joystick ne donne rien et le fait qu'il n'y ait pas non plus de module chargé pour dans la sortie suivante (et ce même avec xboxdrv & xf86-input-joystick ), je pense également que c'est mal barré.
Quand tu la branches à chaud, rien de plus dans le log de X aussi ?

EDIT:
Disons que pour peut-être la faire tourner au moins en manette usb standard, histoire d'avoir essayé quelque chose, tu peux essayer de charger les modules usbhid et joydev: modprobe usbhid ; modprobe joydev.

[Silejonu]

À chaud ou à froid, ça ne change rien.
Charger les modules n'a rien changé non plus.
N'est-il pas possible de coder moi-même un pilote basique, ou est-ce que c'est trop compliqué ?

[benjarobin]

Codé sois même le module n'est pas simple surtout si tu n'as jamais fait de module kernel.
Ce sera beaucoup plus simple de trouver du code déjà fait, mais ici aussi bonne chance

[Silejonu]

Bon, ben merci, je vais attendre un éventuel support dans le futur.