[BOOT] Lenteur au démarrage (timeout USB ?)

Elfk · Message par **Elfk** » jeu. 10 nov. 2011, 21:49

Bonjour

Mon install souffre d'une lenteur de démarrage, il bloquait pendant plus de 10s sur une étage sans raison apparente

Après quelques recherches, j'ai trouvé ceci

Résultats partiels de la commande dmesg

Code : Tout sélectionner

[    2.266752] scsi5 : ahci
[    2.266802] ata1: SATA max UDMA/133 abar m2048@0xe9c06000 port 0xe9c06100 irq 46
[    2.266806] ata2: SATA max UDMA/133 abar m2048@0xe9c06000 port 0xe9c06180 irq 46
[    2.266807] ata3: DUMMY
[    2.266808] ata4: DUMMY
[    2.266810] ata5: SATA max UDMA/133 abar m2048@0xe9c06000 port 0xe9c06300 irq 46
[    2.266813] ata6: SATA max UDMA/133 abar m2048@0xe9c06000 port 0xe9c06380 irq 46
[    2.498349] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    2.581661] ata2: SATA link down (SStatus 0 SControl 300)
[    2.581708] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.581746] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.581770] ata6: SATA link down (SStatus 0 SControl 300)
[    2.584759] ata1.00: ATAPI: SlimtypeDVD A  DS8A5S, WX13, max UDMA/100
[    2.586189] ata1.00: configured for UDMA/100
[    2.590541] scsi 0:0:0:0: CD-ROM            Slimtype DVD A  DS8A5S    WX13 PQ: 0 ANSI: 5
[    2.619781] ata5.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133
[    2.619786] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.621779] ata5.00: configured for UDMA/133
[    2.622023] scsi 4:0:0:0: Direct-Access     ATA      ST9500420AS      0002 PQ: 0 ANSI: 5
[    2.628911] hub 1-1:1.0: USB hub found
[    2.629004] hub 1-1:1.0: 6 ports detected
[    2.734881] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    2.857179] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.857184] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.857580] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.857945] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.857997] sd 4:0:0:0: [sda] Write Protect is off
[    2.857999] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.858018] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.858790] hub 2-1:1.0: USB hub found
[    2.858856] hub 2-1:1.0: 8 ports detected
[    2.906759]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.907530] sd 4:0:0:0: [sda] Attached SCSI disk
[    3.124894] usb 2-1.2: new full speed USB device number 3 using ehci_hcd
[   13.219379] generic-usb 0003:1770:FF00.0001: timeout initializing reports
[   13.219646] generic-usb 0003:1770:FF00.0001: hiddev0,hidraw0: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:1d.0-1.2/input0
[   13.219663] usbcore: registered new interface driver usbhid
[   13.219665] usbhid: USB HID core driver
[   13.677601] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.861901] udevd[207]: starting version 175
[   16.074748] fuse init (API version 7.17)
[   16.102011] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0D:00/input/input1
[   16.144275] ACPI: Lid Switch [LID0]
[   16.144372] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   16.144379] ACPI: Power Button [PWRF]

EDIT:
contenu de lsusb -v

Code : Tout sélectionner

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.01
  iManufacturer           3 Linux 3.1.0-4-ARCH ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1a.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.01
  iManufacturer           3 Linux 3.1.0-4-ARCH ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1d.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.01
  iManufacturer           3 Linux 3.1.0-4-ARCH xhci_hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:07:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            3.01
  iManufacturer           3 Linux 3.1.0-4-ARCH xhci_hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:07:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             2
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.02a0 5Gbps power Rx.Detect
   Port 2: 0000.02a0 5Gbps power Rx.Detect
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 Intel Corp.
  idProduct          0x0020 Integrated Rate Matching Hub
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0103 power enable connect
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 Intel Corp.
  idProduct          0x0020 Integrated Rate Matching Hub
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts             8
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0103 power enable connect
   Port 3: 0000.0503 highspeed power enable connect
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 002 Device 005: ID 1770:ff00  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x1770 
  idProduct          0xff00 
  bcdDevice            1.10
  iManufacturer           1 MSI EPF USB
  iProduct                1 MSI EPF USB
  iSerial                 1 MSI EPF USB
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode           33 US
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      57
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
Device Status:     0xffff
  Self Powered
  Remote Wakeup Enabled
  Test Mode
  Debug Mode

Bus 002 Device 004: ID 18d1:4e11 Google Inc. Nexus One
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x18d1 Google Inc.
  idProduct          0x4e11 Nexus One
  bcdDevice            2.27
  iManufacturer           1 Google, Inc.
  iProduct                2 Nexus One
  iSerial                 3 HT068P800458
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              8 Mass Storage
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 003: ID 3938:1006  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x3938 
  idProduct          0x1006 
  bcdDevice            1.01
  iManufacturer           1 ACROX
  iProduct                2 A1H Mouse
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           59
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     174
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      54
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               1
Device Status:     0x0000
  (Bus Powered)

J'ai remarqué que quelque chose bloque bien le démarrage pendant 10s (3 -> 13s)
De ce que je comprend le problème est en rapport avec un port USB, j'ai essayé de tout débrancher, mais toujours pareil.

Pour info la machine est un laptop MSI 660R

Une idée ?

mélodie · Message par **mélodie** » jeu. 10 nov. 2011, 21:59

Salut, sur quelle ligne le démarrage reste-t-il bloqué ? Ce sera peut-être plus parlant qu'un dmesg partiel ?

Elfk · Message par **Elfk** » jeu. 10 nov. 2011, 22:29

Dans le dmesg ça correspond à c'est ces lignes la:
Si les chiffres à gauche sont bien les secondes il bloque 10s avant de déclarer un timeout, mais je n'arrive pas à comprendre sur quoi :s

[ 3.124894] usb 2-1.2: new full speed USB device number 3 using ehci_hcd
[ 13.219379] generic-usb 0003:1770:FF00.0001: timeout initializing reports

mélodie · Message par **mélodie** » ven. 11 nov. 2011, 10:47

Salut,

En ce cas, juste après la fin du boot, sors un dmesg complet mais mets-le sur pastebin et donnes le lien.

Il faudrait rechercher pourquoi ça bloque sur cet usb : as-tu un hub externe branché sur la machine, par exemple ?
(cela dit, 10 secondes d'attente supplémentaire ne me semble pas catastrophique... )

Elfk · Message par **Elfk** » ven. 11 nov. 2011, 12:01

Voila le dmesg complet
L'attente se fait à la ligne 799
http://pastebin.com/kwe9qBMy

C'est sure, 10s c'est pas la mort, mais c'est rageant de perdre le tiers du temps de boot sur un timeout :p

J'ai pas de hub non. Lors de ce boot j'avais une souris et un nexus One branché en usb. Mais ils ne sont pas en cause, car même débranchant tout les periph externes du PC ça bloque aussi.
J'ai essayé de regardé un peu, j'ai trouvé une reférence vers un manager de led (Décorations sur le laptop, j'ai des lupiotes qui clignotent

) qui sous Windows fonctionne.
Peut être qu'en désactivant ce système je n'aurai plus ce problème, mais j'ai pas trouvé de moyen de désactiver 1 seul port USB

mélodie · Message par **mélodie** » sam. 12 nov. 2011, 01:13

Je ne remarque que ça dans le dmesg:

Code : Tout sélectionner

[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCEEB7F40/0x00000000CEEBAD40, using 32 (20110623/tbfadt-489)

et je ne vois pas le rapport avec l'USB. Quelqu'un d'autre sera peut-être plus inspiré...

/Edit : je vois des "xhci_hcd". Je n'en ai pas encore vu ailleurs. ?

et je vois deux hubs usb:

Code : Tout sélectionner

[    2.095591] hub 2-0:1.0: USB hub found
[    2.095594] hub 2-0:1.0: 2 ports detected

et

Code : Tout sélectionner

[    2.512253] hub 1-1:1.0: USB hub found
[    2.512346] hub 1-1:1.0: 6 ports detected
[    2.621703] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    2.748892] hub 2-1:1.0: USB hub found
[    2.748979] hub 2-1:1.0: 8 ports detected

Code : Tout sélectionner

[    2.111630] xHCI xhci_add_endpoint called for root hub
[    2.111635] xHCI xhci_check_bandwidth called for root hub
[    2.111695] hub 3-0:1.0: USB hub found
[    2.111707] hub 3-0:1.0: 2 ports detected
[    2.111794] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    2.111799] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[    2.114493] xHCI xhci_add_endpoint called for root hub
[    2.114498] xHCI xhci_check_bandwidth called for root hub
[    2.114558] hub 4-0:1.0: USB hub found
[    2.114572] hub 4-0:1.0: 2 ports detected

Et... as-tu visité le BIOS de ta machine ?

Elfk · Message par **Elfk** » sam. 12 nov. 2011, 11:19

Dans la partie USB du BIOS j'ai:
- Legacy USB support
- EHCI Hand-off
- Device Reset timeout

J'ai désactivé les 2 premiers et diminué le timeout du 3ème mais rien ne change :'(

Merci de ton aide en tous cas

mélodie · Message par **mélodie** » dim. 13 nov. 2011, 01:16

Ué.

Et au total ta machine met combien de temps à booter ? (mode joke : 13 secondes ? :p )

Elfk · Message par **Elfk** » dim. 13 nov. 2011, 13:17

40s et quelques, presque plus que Windows. Ca fait mal au coeur :p

Arch Linux

Archlinux.fr [Forums]

[BOOT] Lenteur au démarrage (timeout USB ?)

[BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)

Re: [BOOT] Lenteur au démarrage (timeout USB ?)