Bon mon problème n'est pas vraiment gênant mais a la longue si en faite ^^
Donc j'ai arch i686 avec le pilote propriétaire Nvidia installer et KDE.
J'ai configurer un dual screen qui marche bien, mais il y a un soucie qui m'embête
Lorsque je démarre, mon 2eme écran ne démarre pas en même temps, il faut environs 2 ou 3 minute pour que l'image apparaisse.
Ma configuration et la suivante: a gauche un écran en 1360x768, a droite un écran en 1440x900 tout sa en twinview et position absolut.
J'ai par la suite copier le fichier de configuration proposer dans le setting de nvidia.
Voila se fichier qui et placer dans /etc/X11/xorg.conf.d/20-nvidia.conf
Code : Tout sélectionner
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 295.20 (buildmeister@swio-display-x86-rhel47-01.nvidia.com) Mon Feb 6 21:30:07 PST 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG Electronics W1943"
HorizSync 30.0 - 61.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: 1360x768 +0+0, CRT-1: 1440x900 +1360+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Je vous joint le fichier /var/log/xorg.0.log au cas ou
[ 9.952]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 9.982] X Protocol Version 11, Revision 0
[ 9.982] Build Operating System: Linux 3.2.9-1-ARCH i686
Code : Tout sélectionner
[ 9.982] Current Operating System: Linux ArchKDE 3.2.9-1-ARCH #1 SMP PREEMPT Thu Mar 1 09:10:44 UTC 2012 i686
[ 9.982] Kernel command line: root=/dev/disk/by-uuid/1a6f9883-a990-4342-ae48-440cb23f2390 ro
[ 9.982] Build Date: 05 March 2012 06:02:28AM
[ 9.982]
[ 9.982] Current version of pixman: 0.24.4
[ 9.982] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.982] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 14 09:30:22 2012
[ 10.046] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.079] (==) ServerLayout "Layout0"
[ 10.079] (**) |-->Screen "Screen0" (0)
[ 10.079] (**) | |-->Monitor "Monitor0"
[ 10.096] (**) | |-->Device "Device0"
[ 10.096] (**) |-->Input Device "Keyboard0"
[ 10.096] (**) |-->Input Device "Mouse0"
[ 10.096] (**) Option "Xinerama" "0"
[ 10.096] (==) Automatically adding devices
[ 10.096] (==) Automatically enabling devices
[ 10.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10.219] Entry deleted from font path.
[ 10.219] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.219] Entry deleted from font path.
[ 10.219] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.219] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.219] Entry deleted from font path.
[ 10.219] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.220] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10.220] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.220] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10.220] (WW) Disabling Keyboard0
[ 10.220] (WW) Disabling Mouse0
[ 10.220] (II) Loader magic: 0x822e580
[ 10.220] (II) Module ABI versions:
[ 10.220] X.Org ANSI C Emulation: 0.4
[ 10.220] X.Org Video Driver: 12.0
[ 10.220] X.Org XInput driver : 16.0
[ 10.220] X.Org Server Extension : 6.0
[ 10.221] (--) PCI:*(0:1:0:0) 10de:0622:1462:1878 rev 161, Mem @ 0xfa000000/16777216, 0xc0000000/536870912, 0xf8000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 10.221] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.221] (II) LoadModule: "extmod"
[ 10.263] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 10.275] (II) Module extmod: vendor="X.Org Foundation"
[ 10.275] compiled for 1.12.0, module version = 1.0.0
[ 10.275] Module class: X.Org Server Extension
[ 10.275] ABI class: X.Org Server Extension, version 6.0
[ 10.275] (II) Loading extension MIT-SCREEN-SAVER
[ 10.275] (II) Loading extension XFree86-VidModeExtension
[ 10.275] (II) Loading extension XFree86-DGA
[ 10.275] (II) Loading extension DPMS
[ 10.276] (II) Loading extension XVideo
[ 10.276] (II) Loading extension XVideo-MotionCompensation
[ 10.276] (II) Loading extension X-Resource
[ 10.276] (II) LoadModule: "dbe"
[ 10.276] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 10.278] (II) Module dbe: vendor="X.Org Foundation"
[ 10.278] compiled for 1.12.0, module version = 1.0.0
[ 10.278] Module class: X.Org Server Extension
[ 10.278] ABI class: X.Org Server Extension, version 6.0
[ 10.278] (II) Loading extension DOUBLE-BUFFER
[ 10.278] (II) LoadModule: "glx"
[ 10.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.719] (II) Module glx: vendor="NVIDIA Corporation"
[ 12.719] compiled for 4.0.2, module version = 1.0.0
[ 12.719] Module class: X.Org Server Extension
[ 12.719] (II) NVIDIA GLX Module 295.20 Mon Feb 6 20:47:25 PST 2012
[ 12.719] (II) Loading extension GLX
[ 12.719] (II) LoadModule: "record"
[ 12.720] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12.734] (II) Module record: vendor="X.Org Foundation"
[ 12.734] compiled for 1.12.0, module version = 1.13.0
[ 12.734] Module class: X.Org Server Extension
[ 12.734] ABI class: X.Org Server Extension, version 6.0
[ 12.734] (II) Loading extension RECORD
[ 12.734] (II) LoadModule: "dri"
[ 12.734] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12.754] (II) Module dri: vendor="X.Org Foundation"
[ 12.754] compiled for 1.12.0, module version = 1.0.0
[ 12.754] ABI class: X.Org Server Extension, version 6.0
[ 12.754] (II) Loading extension XFree86-DRI
[ 12.754] (II) LoadModule: "dri2"
[ 12.754] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.755] (II) Module dri2: vendor="X.Org Foundation"
[ 12.755] compiled for 1.12.0, module version = 1.2.0
[ 12.755] ABI class: X.Org Server Extension, version 6.0
[ 12.755] (II) Loading extension DRI2
[ 12.755] (II) LoadModule: "nvidia"
[ 12.755] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12.810] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12.810] compiled for 4.0.2, module version = 1.0.0
[ 12.810] Module class: X.Org Video Driver
[ 12.853] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 20:27:19 PST 2012
[ 12.859] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12.866] (++) using VT number 7
[ 12.872] (II) Loading sub module "fb"
[ 12.872] (II) LoadModule: "fb"
[ 12.872] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.883] (II) Module fb: vendor="X.Org Foundation"
[ 12.883] compiled for 1.12.0, module version = 1.0.0
[ 12.883] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.883] (II) Loading sub module "wfb"
[ 12.883] (II) LoadModule: "wfb"
[ 12.883] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 12.897] (II) Module wfb: vendor="X.Org Foundation"
[ 12.897] compiled for 1.12.0, module version = 1.0.0
[ 12.897] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.897] (II) Loading sub module "ramdac"
[ 12.897] (II) LoadModule: "ramdac"
[ 12.897] (II) Module "ramdac" already built-in
[ 12.923] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.923] (==) NVIDIA(0): RGB weight 888
[ 12.923] (==) NVIDIA(0): Default visual is TrueColor
[ 12.923] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.923] (**) NVIDIA(0): Option "TwinView" "1"
[ 12.923] (**) NVIDIA(0): Option "MetaModes" "CRT-0: 1360x768 +0+0, CRT-1: 1440x900 +1360+0"
[ 12.923] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
[ 12.924] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.590] (II) NVIDIA(GPU-0): Display (LG Electronics W1943 (CRT-0)) does not support NVIDIA
[ 15.590] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 15.630] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 15.630] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 15.641] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 15.641] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 15.641] (--) NVIDIA(0): VideoBIOS: 62.94.8d.00.06
[ 15.641] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 15.641] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 15.641] (--) NVIDIA(0): Connected display device(s) on GeForce 9600 GT at PCI:1:0:0
[ 15.641] (--) NVIDIA(0): LG Electronics W1943 (CRT-0)
[ 15.641] (--) NVIDIA(0): Samsung SyncMaster (CRT-1)
[ 15.641] (--) NVIDIA(0): LG Electronics W1943 (CRT-0): 400.0 MHz maximum pixel clock
[ 15.641] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 15.644] (**) NVIDIA(0): TwinView enabled
[ 15.644] (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, CRT-1
[ 15.644] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.644] (**) NVIDIA(0): device LG Electronics W1943 (CRT-0) (Using EDID
[ 15.644] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 15.653] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.653] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 15.653] (**) NVIDIA(0): has been enabled on all display devices.)
[ 15.667] (II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1
[ 15.674] (II) NVIDIA(0): Validated modes:
[ 15.674] (II) NVIDIA(0): "CRT-0:1360x768+0+0,CRT-1:1440x900+1360+0"
[ 15.674] (II) NVIDIA(0): Virtual screen size determined to be 2800 x 900
[ 15.700] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 15.700] (--) NVIDIA(0): option
[ 15.700] (--) Depth 24 pixmap format is 32 bpp
[ 15.700] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 15.705] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 15.705] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 15.705] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 15.705] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 15.705] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 15.705] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 15.705] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 15.705] (II) NVIDIA(0): Config Options in the README.
[ 15.707] (II) NVIDIA(0): Setting mode "CRT-0:1360x768+0+0,CRT-1:1440x900+1360+0"
[ 15.755] (II) Loading extension NV-GLX
[ 15.890] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 15.890] (==) NVIDIA(0): Backing store disabled
[ 15.890] (==) NVIDIA(0): Silken mouse enabled
[ 15.891] (**) NVIDIA(0): DPMS enabled
[ 15.891] (II) Loading extension NV-CONTROL
[ 15.891] (II) Loading extension XINERAMA
[ 15.891] (II) Loading sub module "dri2"
[ 15.891] (II) LoadModule: "dri2"
[ 15.892] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.892] (II) Module dri2: vendor="X.Org Foundation"
[ 15.892] compiled for 1.12.0, module version = 1.2.0
[ 15.892] ABI class: X.Org Server Extension, version 6.0
[ 15.892] (II) NVIDIA(0): [DRI2] Setup complete
[ 15.892] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 15.892] (==) RandR enabled
[ 15.892] (II) Initializing built-in extension Generic Event Extension
[ 15.892] (II) Initializing built-in extension SHAPE
[ 15.892] (II) Initializing built-in extension MIT-SHM
[ 15.892] (II) Initializing built-in extension XInputExtension
[ 15.892] (II) Initializing built-in extension XTEST
[ 15.892] (II) Initializing built-in extension BIG-REQUESTS
[ 15.892] (II) Initializing built-in extension SYNC
[ 15.892] (II) Initializing built-in extension XKEYBOARD
[ 15.892] (II) Initializing built-in extension XC-MISC
[ 15.892] (II) Initializing built-in extension SECURITY
[ 15.892] (II) Initializing built-in extension XINERAMA
[ 15.892] (II) Initializing built-in extension XFIXES
[ 15.892] (II) Initializing built-in extension RENDER
[ 15.892] (II) Initializing built-in extension RANDR
[ 15.892] (II) Initializing built-in extension COMPOSITE
[ 15.892] (II) Initializing built-in extension DAMAGE
[ 15.896] (II) Initializing extension GLX
[ 16.191] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 16.191] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.191] (II) LoadModule: "evdev"
[ 16.191] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.200] (II) Module evdev: vendor="X.Org Foundation"
[ 16.200] compiled for 1.12.0, module version = 2.7.0
[ 16.200] Module class: X.Org XInput Driver
[ 16.200] ABI class: X.Org XInput driver, version 16.0
[ 16.200] (II) Using input driver 'evdev' for 'Power Button'
[ 16.200] (**) Power Button: always reports core events
[ 16.200] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 16.200] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.200] (--) evdev: Power Button: Found keys
[ 16.200] (II) evdev: Power Button: Configuring as keyboard
[ 16.200] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 16.200] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.200] (**) Option "xkb_rules" "evdev"
[ 16.200] (**) Option "xkb_model" "evdev"
[ 16.200] (**) Option "xkb_layout" "us"
[ 16.237] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.237] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.237] (II) Using input driver 'evdev' for 'Power Button'
[ 16.237] (**) Power Button: always reports core events
[ 16.237] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.238] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.238] (--) evdev: Power Button: Found keys
[ 16.238] (II) evdev: Power Button: Configuring as keyboard
[ 16.238] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 16.238] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.238] (**) Option "xkb_rules" "evdev"
[ 16.238] (**) Option "xkb_model" "evdev"
[ 16.238] (**) Option "xkb_layout" "us"
[ 16.238] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 16.238] (II) No input driver specified, ignoring this device.
[ 16.238] (II) This device may have been added with another device file.
[ 16.239] (II) config/udev: Adding input device MLK Trust Mouse 16342 (/dev/input/event1)
[ 16.239] (**) MLK Trust Mouse 16342: Applying InputClass "evdev pointer catchall"
[ 16.239] (**) MLK Trust Mouse 16342: Applying InputClass "evdev keyboard catchall"
[ 16.239] (II) Using input driver 'evdev' for 'MLK Trust Mouse 16342'
[ 16.239] (**) MLK Trust Mouse 16342: always reports core events
[ 16.239] (**) evdev: MLK Trust Mouse 16342: Device: "/dev/input/event1"
[ 16.239] (--) evdev: MLK Trust Mouse 16342: Vendor 0x4fc Product 0x5da
[ 16.239] (--) evdev: MLK Trust Mouse 16342: Found 9 mouse buttons
[ 16.239] (--) evdev: MLK Trust Mouse 16342: Found scroll wheel(s)
[ 16.239] (--) evdev: MLK Trust Mouse 16342: Found relative axes
[ 16.239] (--) evdev: MLK Trust Mouse 16342: Found x and y relative axes
[ 16.239] (--) evdev: MLK Trust Mouse 16342: Found absolute axes
[ 16.239] (II) evdev: MLK Trust Mouse 16342: Forcing absolute x/y axes to exist.
[ 16.239] (--) evdev: MLK Trust Mouse 16342: Found keys
[ 16.239] (II) evdev: MLK Trust Mouse 16342: Configuring as mouse
[ 16.239] (II) evdev: MLK Trust Mouse 16342: Configuring as keyboard
[ 16.239] (II) evdev: MLK Trust Mouse 16342: Adding scrollwheel support
[ 16.239] (**) evdev: MLK Trust Mouse 16342: YAxisMapping: buttons 4 and 5
[ 16.239] (**) evdev: MLK Trust Mouse 16342: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.239] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1/event1"
[ 16.239] (II) XINPUT: Adding extended input device "MLK Trust Mouse 16342" (type: KEYBOARD, id 8)
[ 16.239] (**) Option "xkb_rules" "evdev"
[ 16.239] (**) Option "xkb_model" "evdev"
[ 16.239] (**) Option "xkb_layout" "us"
[ 16.240] (II) evdev: MLK Trust Mouse 16342: initialized for relative axes.
[ 16.240] (WW) evdev: MLK Trust Mouse 16342: ignoring absolute axes.
[ 16.240] (**) MLK Trust Mouse 16342: (accel) keeping acceleration scheme 1
[ 16.240] (**) MLK Trust Mouse 16342: (accel) acceleration profile 0
[ 16.240] (**) MLK Trust Mouse 16342: (accel) acceleration factor: 2.000
[ 16.240] (**) MLK Trust Mouse 16342: (accel) acceleration threshold: 4
[ 16.241] (II) config/udev: Adding input device MLK Trust Mouse 16342 (/dev/input/mouse0)
[ 16.241] (II) No input driver specified, ignoring this device.
[ 16.241] (II) This device may have been added with another device file.
[ 16.241] (II) config/udev: Adding input device UVC Camera (046d:0819) (/dev/input/event5)
[ 16.241] (**) UVC Camera (046d:0819): Applying InputClass "evdev keyboard catchall"
[ 16.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:0819)'
[ 16.241] (**) UVC Camera (046d:0819): always reports core events
[ 16.241] (**) evdev: UVC Camera (046d:0819): Device: "/dev/input/event5"
[ 16.241] (--) evdev: UVC Camera (046d:0819): Vendor 0x46d Product 0x819
[ 16.241] (--) evdev: UVC Camera (046d:0819): Found keys
[ 16.241] (II) evdev: UVC Camera (046d:0819): Configuring as keyboard
[ 16.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5/event5"
[ 16.241] (II) XINPUT: Adding extended input device "UVC Camera (046d:0819)" (type: KEYBOARD, id 9)
[ 16.241] (**) Option "xkb_rules" "evdev"
[ 16.241] (**) Option "xkb_model" "evdev"
[ 16.241] (**) Option "xkb_layout" "us"
[ 16.242] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.242] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.242] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.242] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.242] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 16.242] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.242] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.242] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.242] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.242] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 16.242] (**) Option "xkb_rules" "evdev"
[ 16.242] (**) Option "xkb_model" "evdev"
[ 16.243] (**) Option "xkb_layout" "us"
[ 16.243] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 16.243] (II) No input driver specified, ignoring this device.
[ 16.243] (II) This device may have been added with another device file.
Merci a ceux qui m’aideront.
