arch-black c'est mieux non ? 
Par exemple ( /etc/conf.d/splash ).Iceman a écrit :J'ai tout installé, ainsi que le thème Arch-black, seulement lorsque que je reboot, voici le message qu'il me met : Failed to load theme arch, auriez vous une idée de ou cela peut venir, je peux vous indiquer sans soucis les configurations dans certains fichies si les potentiels helper le souhaitent !
):arch black, du coup il veut le thème arch, qu'il ne trouve pas (failed to load theme 'arch'). Essaie avec theme:arch-black. 
! /etc/conf.d/splashCode : Tout sélectionner
pacman -Qs fbsplashCode : Tout sélectionner
# /etc/conf.d/splash
#
#### WARNING!
## This file is also sourced in the initcpio hook.
## No BASH-code (like arrays) is allowed here!
#### initcpio and Fbsplash daemon ##########################################
## Themes to include into initcpio
## For a smaller initcpio you may try theme cfg files instead of directories.
SPLASH_THEMES="
arch-black
arch-black/1024x768.cfg
arch-black/1280x800.cfg
"
## Override the initial silent splash screen status message defaults.
## Note: '$progress' will be replaced by Fbsplash itself.
## * initcpio - (no effect with fbcondecor kernel)
SPLASH_INIT_MESSAGE="Initializing the kernel"
## * bootup
SPLASH_BOOT_MESSAGE="Booting '$HOSTNAME' (\$progress%)"
## * reboot
SPLASH_REBOOT_MESSAGE="Rebooting '$HOSTNAME' (\$progress%)"
## * shutdown
SPLASH_SHUTDOWN_MESSAGE="Shutting down '$HOSTNAME' (\$progress%)"
## Include and use the Fbsplash daemon (1.5 MiB) in the initcpio
## instead of the small helper only.
## Usefull to show animations early.
## Note: Themes with 'scripts/rc_init-pre' like 'arch-banner-icons' are
## supported now if fbsplash-extras>=2.0.10 is installed, but there
## might still be some sophisticated ones which break when using this.
SPLASH_DAEMON="early"
## Make the splash daemon use fade effects.
## Note: The initcpio helper does only use the kernel parameter!
# Just use fadein on bootup and fadeout on shutdown/reboot
case $PREVLEVEL in N ) SPLASH_EFFECTS="fadein" ; esac
case $RUNLEVEL in [06] ) SPLASH_EFFECTS="fadeout"; esac
# Uncomment this line to allways use both
# SPLASH_EFFECTS="fadein,fadeout"
## Enable the textbox when starting the Fbsplash daemon.
## Useful if the theme provides a message log or other textbox.
## The scripts write any initscripts [FAIL] messages to the log.
## Note: The textbox can also be toggled by pressing F3-key.
SPLASH_TEXTBOX="yes"
## Splash progress timeout
## If set to a positive value, Fbsplash will automatically switch to verbose
## mode if there is no progress for the specified number of seconds.
SPLASH_AUTOVERBOSE=0
#### scripts behaviour #####################################################
## Change to verbose mode on any initscripts [FAIL] message
## Useful with very simple themes and also when starting Xorg from DAEMONS
SPLASH_VERBOSE_ON_ERRORS="no"
## Name of the DAEMONS script starting Xorg if any
## Set this to avoid virtual terminal change struggle between X and Fbsplash.
SPLASH_XSERVICE="gdm"
#SPLASH_XSERVICE="kdm"
#SPLASH_XSERVICE="xdm"
#SPLASH_XSERVICE="lxdm"
#SPLASH_XSERVICE="slim"
## Push initscripts [BUSY] messages to the splash status message line.
SPLASH_PUSH_MESSAGES="no"
# EOF #
Code : Tout sélectionner
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 0
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz-linux root=/dev/sda1 ro console=tty1 splash=silent,theme:a$
initrd /boot/initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz-linux root=/dev/sda1 ro console=tty1 splash=silent,theme:a$
initrd /boot/initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Code : Tout sélectionner
[root@(none) ~]# pacman -Qs fbsplash
local/fbsplash 1.5.4.4-8
A userspace implementation of a splash screen for Linux (formerly known as
gensplash)
local/fbsplash-theme-arch-black 1.2-8
An Arch Linux fbsplash theme with the new logo
[root@(none) ~]#
mkinitcpio -p linux / fbsplash)
Code : Tout sélectionner
splash-resize arch-black 1600x1200 1280x800
mkinitcpio).su depuis un compte utilisateur c'est aller au devant d'ennui (pourrissement du compte utilisateur), utilise su - (voir man et wiki pour le pourquoi, su). 
Rien ne change en faisant cela ... je vais essayer un nouveau thème ...... Tu peux mettre SPLASH_VERBOSE_ON_ERRORS à yes dans /etc/conf.d/splash.conf, voir s'il y a plus d'infos ? Éventuellement, enlève arch-black/1024x768.cfg et arch-black/1280x800.cfg dans SPLASH_THEMES... essaie un autre thème aussi, pour voir, dès fois que (pour info, le arch-black passe bien chez moi)...
