freeze du pc

pass · Message par **pass** » lun. 29 oct. 2007, 06:34

Bonjour;

je suis novice dans l'utilisation de archlinux.
j'ai une carte graphique de type ati mobility 7500, j'ai donc installé les driver libre ati.

mon proeblème et que quand je lance l'interface graphique mon pc marche bien pendant un certain temps puis au bout d'un moment ce freeze et je ne peux plux rien faire.

Ce problème n'arrive pas quand je charge les driver vesa c'est donc pour cela que je met ce topic dans cette rubrique.

pour mettre en place les drivers j'ai suivi le howto du wiki.

je rencontre aussi le meme problème avec les driver proprio de ati

je n'arrive pas résoudre ce problème, merci de m'aider a le résoudre ou tout du moins me donner des pistes

bonne journée

mélodie · Message par **mélodie** » lun. 29 oct. 2007, 11:52

Bonjour,

Veux-tu préciser l'Url du howto du wiki que tu as suivi s'il te plaît, et donner des informations complètes sur ta machine, ainsi que tu les messages d'erreur ?

Messages systèmes de /var/log/messages.log, messages de /var/log/Xorg.0.log...

Il y a deux fils très récents que je voudrais te demander de lire, pour éclaircir quelques points.
[DRI]Accélération Graphique avec vieille machine (Résolu)

et
Ecran gelé => PC qui plante sans arret

où quelques éléments pourraient peut-être t'être utiles.

pass · Message par **pass** » lun. 29 oct. 2007, 19:51

voici l'adresse du wiki http://wiki.archlinux.fr/howto:video:ati

En ce qui conecerne ma config voici un extrait de lspci

00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
02:06.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:06.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
02:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
02:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
02:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)

j'ai aucun message d'erreur qui s'affche

voici mon /var/log/message

Oct 29 19:55:13 myhost Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Sat Oct 27 09:04:14 UTC 2007
Oct 29 19:55:13 myhost BIOS-provided physical RAM map:
Oct 29 19:55:13 myhost BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 29 19:55:13 myhost BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 29 19:55:13 myhost BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
Oct 29 19:55:13 myhost BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
Oct 29 19:55:13 myhost BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data)
Oct 29 19:55:13 myhost BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS)
Oct 29 19:55:13 myhost BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
Oct 29 19:55:13 myhost BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
Oct 29 19:55:13 myhost BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Oct 29 19:55:13 myhost 0MB HIGHMEM available.
Oct 29 19:55:13 myhost 511MB LOWMEM available.
Oct 29 19:55:13 myhost Zone PFN ranges:
Oct 29 19:55:13 myhost DMA 0 -> 4096
Oct 29 19:55:13 myhost Normal 4096 -> 130928
Oct 29 19:55:13 myhost HighMem 130928 -> 130928
Oct 29 19:55:13 myhost Movable zone start PFN for each node
Oct 29 19:55:13 myhost early_node_map[1] active PFN ranges
Oct 29 19:55:13 myhost 0: 0 -> 130928
Oct 29 19:55:13 myhost DMI present.
Oct 29 19:55:13 myhost ACPI: RSDP 000F5E80, 0014 (r0 ACER )
Oct 29 19:55:13 myhost ACPI: RSDT 1FF75A7B, 002C (r1 ACER RSDT 20020930 LTP 0)
Oct 29 19:55:13 myhost ACPI: FACP 1FF7BF64, 0074 (r1 ACER IBIS 20020930 PTL 1E)
Oct 29 19:55:13 myhost ACPI: DSDT 1FF75AA7, 64BD (r1 ACER IBIS 20020930 MSFT 100000E)
Oct 29 19:55:13 myhost ACPI: FACS 1FF7CFC0, 0040
Oct 29 19:55:13 myhost ACPI: BOOT 1FF7BFD8, 0028 (r1 ACER IBIS 20020930 LTP 1)
Oct 29 19:55:13 myhost ACPI: PM-Timer IO Port: 0x1008
Oct 29 19:55:13 myhost Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
Oct 29 19:55:13 myhost swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Oct 29 19:55:13 myhost swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d8000
Oct 29 19:55:13 myhost swsusp: Registered nosave memory region: 00000000000d8000 - 0000000000100000
Oct 29 19:55:13 myhost Built 1 zonelists in Zone order. Total pages: 129906
Oct 29 19:55:13 myhost Kernel command line: root=/dev/sda4 ro
Oct 29 19:55:13 myhost Local APIC disabled by BIOS -- you can enable it with "lapic"
Oct 29 19:55:13 myhost Enabling fast FPU save and restore... done.
Oct 29 19:55:13 myhost Enabling unmasked SIMD FPU exception support... done.
Oct 29 19:55:13 myhost Initializing CPU#0
Oct 29 19:55:13 myhost PID hash table entries: 2048 (order: 11, 8192 bytes)
Oct 29 19:55:13 myhost Detected 2193.050 MHz processor.
Oct 29 19:55:13 myhost Console: colour VGA+ 80x25
Oct 29 19:55:13 myhost console [tty0] enabled
Oct 29 19:55:13 myhost Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 29 19:55:13 myhost Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 29 19:55:13 myhost Memory: 513236k/523712k available (2442k kernel code, 9876k reserved, 814k data, 296k init, 0k highmem)
Oct 29 19:55:13 myhost virtual kernel memory layout:
Oct 29 19:55:13 myhost fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
Oct 29 19:55:13 myhost pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Oct 29 19:55:13 myhost vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
Oct 29 19:55:13 myhost lowmem : 0xc0000000 - 0xdff70000 ( 511 MB)
Oct 29 19:55:13 myhost .init : 0xc0435000 - 0xc047f000 ( 296 kB)
Oct 29 19:55:13 myhost .data : 0xc0362829 - 0xc042e21c ( 814 kB)
Oct 29 19:55:13 myhost .text : 0xc0100000 - 0xc0362829 (2442 kB)
Oct 29 19:55:13 myhost Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 29 19:55:13 myhost SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Oct 29 19:55:13 myhost Calibrating delay using timer specific routine.. 4390.70 BogoMIPS (lpj=7314724)
Oct 29 19:55:13 myhost Security Framework v1.0.0 initialized
Oct 29 19:55:13 myhost Mount-cache hash table entries: 512
Oct 29 19:55:13 myhost CPU: Trace cache: 12K uops, L1 D cache: 8K
Oct 29 19:55:13 myhost CPU: L2 cache: 512K
Oct 29 19:55:13 myhost CPU: Hyper-Threading is disabled
Oct 29 19:55:13 myhost Intel machine check architecture supported.
Oct 29 19:55:13 myhost Intel machine check reporting enabled on CPU#0.
Oct 29 19:55:13 myhost CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Oct 29 19:55:13 myhost CPU0: Thermal monitoring enabled
Oct 29 19:55:13 myhost Compat vDSO mapped to ffffe000.
Oct 29 19:55:13 myhost Checking 'hlt' instruction... OK.
Oct 29 19:55:13 myhost SMP alternatives: switching to UP code
Oct 29 19:55:13 myhost Freeing SMP alternatives: 11k freed
Oct 29 19:55:13 myhost Early unpacking initramfs... done
Oct 29 19:55:13 myhost ACPI: Core revision 20070126
Oct 29 19:55:13 myhost ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Oct 29 19:55:13 myhost ACPI: setting ELCR to 0200 (from 0420)
Oct 29 19:55:13 myhost CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07
Oct 29 19:55:13 myhost SMP motherboard not detected.
Oct 29 19:55:13 myhost Local APIC not detected. Using dummy APIC emulation.
Oct 29 19:55:13 myhost Brought up 1 CPUs
Oct 29 19:55:13 myhost Booting paravirtualized kernel on bare hardware
Oct 29 19:55:13 myhost NET: Registered protocol family 16
Oct 29 19:55:13 myhost ACPI: bus type pci registered
Oct 29 19:55:13 myhost PCI: PCI BIOS revision 2.10 entry at 0xfd731, last bus=2
Oct 29 19:55:13 myhost PCI: Using configuration type 1
Oct 29 19:55:13 myhost Setting up standard PCI resources
Oct 29 19:55:13 myhost ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
Oct 29 19:55:13 myhost ACPI: Interpreter enabled
Oct 29 19:55:13 myhost ACPI: (supports S0 S3 S4 S5)
Oct 29 19:55:13 myhost ACPI: Using PIC for interrupt routing
Oct 29 19:55:13 myhost ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
Oct 29 19:55:13 myhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 29 19:55:13 myhost PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
Oct 29 19:55:13 myhost PCI quirk: region 1180-11bf claimed by ICH4 GPIO
Oct 29 19:55:13 myhost PCI: Transparent bridge - 0000:00:1e.0
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
Oct 29 19:55:13 myhost ACPI: Power Resource [PFN0] (off)
Oct 29 19:55:13 myhost ACPI: Power Resource [PFN1] (off)
Oct 29 19:55:13 myhost Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 29 19:55:13 myhost pnp: PnP ACPI init
Oct 29 19:55:13 myhost ACPI: bus type pnp registered
Oct 29 19:55:13 myhost pnp: PnP ACPI: found 10 devices
Oct 29 19:55:13 myhost ACPI: ACPI bus type pnp unregistered
Oct 29 19:55:13 myhost SCSI subsystem initialized
Oct 29 19:55:13 myhost PCI: Using ACPI for IRQ routing
Oct 29 19:55:13 myhost PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 29 19:55:13 myhost NetLabel: Initializing
Oct 29 19:55:13 myhost NetLabel: domain hash size = 128
Oct 29 19:55:13 myhost NetLabel: protocols = UNLABELED CIPSOv4
Oct 29 19:55:13 myhost NetLabel: unlabeled traffic allowed by default
Oct 29 19:55:13 myhost Time: tsc clocksource has been installed.
Oct 29 19:55:13 myhost pnp: 00:01: iomem range 0xff800000-0xffbfffff could not be reserved
Oct 29 19:55:13 myhost pnp: 00:01: iomem range 0xfebff100-0xfebffbff has been reserved
Oct 29 19:55:13 myhost pnp: 00:01: iomem range 0xfff00000-0xffffffff could not be reserved
Oct 29 19:55:13 myhost pnp: 00:01: iomem range 0x0-0x9ffff could not be reserved
Oct 29 19:55:13 myhost PCI: Bridge: 0000:00:01.0
Oct 29 19:55:13 myhost IO window: 3000-3fff
Oct 29 19:55:13 myhost MEM window: e8100000-e81fffff
Oct 29 19:55:13 myhost PREFETCH window: f0000000-f7ffffff
Oct 29 19:55:13 myhost PCI: Bus 3, cardbus bridge: 0000:02:06.0
Oct 29 19:55:13 myhost IO window: 00004000-000040ff
Oct 29 19:55:13 myhost IO window: 00004400-000044ff
Oct 29 19:55:13 myhost PREFETCH window: 30000000-33ffffff
Oct 29 19:55:13 myhost MEM window: 38000000-3bffffff
Oct 29 19:55:13 myhost PCI: Bus 7, cardbus bridge: 0000:02:06.1
Oct 29 19:55:13 myhost IO window: 00004800-000048ff
Oct 29 19:55:13 myhost IO window: 00004c00-00004cff
Oct 29 19:55:13 myhost PREFETCH window: 34000000-37ffffff
Oct 29 19:55:13 myhost MEM window: 3c000000-3fffffff
Oct 29 19:55:13 myhost PCI: Bridge: 0000:00:1e.0
Oct 29 19:55:13 myhost IO window: 4000-5fff
Oct 29 19:55:13 myhost MEM window: e8200000-e87fffff
Oct 29 19:55:13 myhost PREFETCH window: 30000000-37ffffff
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost PCI: Enabling device 0000:02:06.1 (0104 -> 0107)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost NET: Registered protocol family 2
Oct 29 19:55:13 myhost IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Oct 29 19:55:13 myhost TCP established hash table entries: 16384 (order: 6, 262144 bytes)
Oct 29 19:55:13 myhost TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
Oct 29 19:55:13 myhost TCP: Hash tables configured (established 16384 bind 16384)
Oct 29 19:55:13 myhost TCP reno registered
Oct 29 19:55:13 myhost checking if image is initramfs... it is
Oct 29 19:55:13 myhost Freeing initrd memory: 1443k freed
Oct 29 19:55:13 myhost Simple Boot Flag at 0x36 set to 0x1
Oct 29 19:55:13 myhost apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 29 19:55:13 myhost apm: overridden by ACPI.
Oct 29 19:55:13 myhost VFS: Disk quotas dquot_6.5.1
Oct 29 19:55:13 myhost Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 29 19:55:13 myhost Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 29 19:55:13 myhost Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Oct 29 19:55:13 myhost io scheduler noop registered
Oct 29 19:55:13 myhost io scheduler anticipatory registered
Oct 29 19:55:13 myhost io scheduler deadline registered
Oct 29 19:55:13 myhost io scheduler cfq registered (default)
Oct 29 19:55:13 myhost isapnp: Scanning for PnP cards...
Oct 29 19:55:13 myhost Switched to high resolution mode on CPU 0
Oct 29 19:55:13 myhost isapnp: No Plug & Play device found
Oct 29 19:55:13 myhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Oct 29 19:55:13 myhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 29 19:55:13 myhost 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:00:1f.6 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Oct 29 19:55:13 myhost RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Oct 29 19:55:13 myhost loop: module loaded
Oct 29 19:55:13 myhost input: Macintosh mouse button emulation as /devices/virtual/input/input0
Oct 29 19:55:13 myhost PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
Oct 29 19:55:13 myhost serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 29 19:55:13 myhost serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 29 19:55:13 myhost mice: PS/2 mouse device common for all mice
Oct 29 19:55:13 myhost input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Oct 29 19:55:13 myhost TCP cubic registered
Oct 29 19:55:13 myhost NET: Registered protocol family 1
Oct 29 19:55:13 myhost NET: Registered protocol family 17
Oct 29 19:55:13 myhost Using IPI No-Shortcut mode
Oct 29 19:55:13 myhost Freeing unused kernel memory: 296k freed
Oct 29 19:55:13 myhost PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost scsi0 : ata_piix
Oct 29 19:55:13 myhost scsi1 : ata_piix
Oct 29 19:55:13 myhost ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
Oct 29 19:55:13 myhost ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
Oct 29 19:55:13 myhost ata1.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100
Oct 29 19:55:13 myhost ata1.00: 156301488 sectors, multi 16: LBA48
Oct 29 19:55:13 myhost ata1.00: configured for UDMA/100
Oct 29 19:55:13 myhost ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UX08, max UDMA/33
Oct 29 19:55:13 myhost ata2.00: configured for UDMA/33
Oct 29 19:55:13 myhost scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5
Oct 29 19:55:13 myhost scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-242 UX08 PQ: 0 ANSI: 5
Oct 29 19:55:13 myhost sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 29 19:55:13 myhost sd 0:0:0:0: [sda] Write Protect is off
Oct 29 19:55:13 myhost sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 29 19:55:13 myhost sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 29 19:55:13 myhost sd 0:0:0:0: [sda] Write Protect is off
Oct 29 19:55:13 myhost sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 29 19:55:13 myhost sda: sda1 sda2 sda3 < sda5 > sda4
Oct 29 19:55:13 myhost sd 0:0:0:0: [sda] Attached SCSI disk
Oct 29 19:55:13 myhost sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
Oct 29 19:55:13 myhost Uniform CD-ROM driver Revision: 3.20
Oct 29 19:55:13 myhost EXT3-fs: mounted filesystem with ordered data mode.
Oct 29 19:55:13 myhost kjournald starting. Commit interval 5 seconds
Oct 29 19:55:13 myhost usbcore: registered new interface driver usbfs
Oct 29 19:55:13 myhost usbcore: registered new interface driver hub
Oct 29 19:55:13 myhost usbcore: registered new device driver usb
Oct 29 19:55:13 myhost b44.c:v1.01 (Jun 16, 2006)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
Oct 29 19:55:13 myhost eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:26:ba:72
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:00:1f.5 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost intel8x0_measure_ac97_clock: measured 52650 usecs
Oct 29 19:55:13 myhost intel8x0: clocking to 48000
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:00:1f.6 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost ACPI: AC Adapter [ACAD] (on-line)
Oct 29 19:55:13 myhost ACPI: Battery Slot [BAT1] (battery present)
Oct 29 19:55:13 myhost ACPI: Battery Slot [BAT2] (battery absent)
Oct 29 19:55:13 myhost input: Power Button (FF) as /devices/virtual/input/input2
Oct 29 19:55:13 myhost ACPI: Power Button (FF) [PWRF]
Oct 29 19:55:13 myhost input: Lid Switch as /devices/virtual/input/input3
Oct 29 19:55:13 myhost ACPI: Lid Switch [LID]
Oct 29 19:55:13 myhost input: Sleep Button (CM) as /devices/virtual/input/input4
Oct 29 19:55:13 myhost ACPI: Sleep Button (CM) [SLPB]
Oct 29 19:55:13 myhost ACPI: Transitioning device [FAN0] to D3
Oct 29 19:55:13 myhost ACPI: Transitioning device [FAN0] to D3
Oct 29 19:55:13 myhost ACPI: Fan [FAN0] (off)
Oct 29 19:55:13 myhost ACPI: Transitioning device [FAN1] to D3
Oct 29 19:55:13 myhost ACPI: Transitioning device [FAN1] to D3
Oct 29 19:55:13 myhost ACPI: Fan [FAN1] (off)
Oct 29 19:55:13 myhost ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Oct 29 19:55:13 myhost ACPI: Thermal Zone [THRM] (56 C)
Oct 29 19:55:13 myhost sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 29 19:55:13 myhost sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 29 19:55:13 myhost PPP generic driver version 2.4.2
Oct 29 19:55:13 myhost pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 29 19:55:13 myhost shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 29 19:55:13 myhost USB Universal Host Controller Interface driver v3.0
Oct 29 19:55:13 myhost PCI: Enabling device 0000:00:1d.0 (0004 -> 0005)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 29 19:55:13 myhost uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Oct 29 19:55:13 myhost uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
Oct 29 19:55:13 myhost usb usb1: configuration #1 chosen from 1 choice
Oct 29 19:55:13 myhost hub 1-0:1.0: USB hub found
Oct 29 19:55:13 myhost hub 1-0:1.0: 2 ports detected
Oct 29 19:55:13 myhost Linux agpgart interface v0.102
Oct 29 19:55:13 myhost PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:00:1d.1 -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
Oct 29 19:55:13 myhost uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 29 19:55:13 myhost uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Oct 29 19:55:13 myhost uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
Oct 29 19:55:13 myhost usb usb2: configuration #1 chosen from 1 choice
Oct 29 19:55:13 myhost hub 2-0:1.0: USB hub found
Oct 29 19:55:13 myhost hub 2-0:1.0: 2 ports detected
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost uhci_hcd 0000:02:09.0: UHCI Host Controller
Oct 29 19:55:13 myhost uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 3
Oct 29 19:55:13 myhost uhci_hcd 0000:02:09.0: irq 10, io base 0x00005000
Oct 29 19:55:13 myhost usb usb3: configuration #1 chosen from 1 choice
Oct 29 19:55:13 myhost hub 3-0:1.0: USB hub found
Oct 29 19:55:13 myhost hub 3-0:1.0: 2 ports detected
Oct 29 19:55:13 myhost agpgart: Detected an Intel 845G Chipset.
Oct 29 19:55:13 myhost agpgart: AGP aperture is 64M @ 0xec000000
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:02:09.1 -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost uhci_hcd 0000:02:09.1: UHCI Host Controller
Oct 29 19:55:13 myhost uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 4
Oct 29 19:55:13 myhost uhci_hcd 0000:02:09.1: irq 10, io base 0x00005020
Oct 29 19:55:13 myhost usb usb4: configuration #1 chosen from 1 choice
Oct 29 19:55:13 myhost hub 4-0:1.0: USB hub found
Oct 29 19:55:13 myhost hub 4-0:1.0: 2 ports detected
Oct 29 19:55:13 myhost usb 2-2: new full speed USB device using uhci_hcd and address 2
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:00:1f.3 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 29 19:55:13 myhost usb 2-2: configuration #1 chosen from 1 choice
Oct 29 19:55:13 myhost rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 29 19:55:13 myhost rtc0: alarms up to one month, y3k
Oct 29 19:55:13 myhost usb 3-2: new low speed USB device using uhci_hcd and address 2
Oct 29 19:55:13 myhost usb 3-2: configuration #1 chosen from 1 choice
Oct 29 19:55:13 myhost Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
Oct 29 19:55:13 myhost input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Oct 29 19:55:13 myhost parport_pc 00:08: reported by Plug and Play ACPI
Oct 29 19:55:13 myhost parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:02:09.2

 -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

Oct 29 19:55:13 myhost ehci_hcd 0000:02:09.2: EHCI Host Controller

Oct 29 19:55:13 myhost ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 5

Oct 29 19:55:13 myhost ehci_hcd 0000:02:09.2: irq 10, io mem 0xe8208800

Oct 29 19:55:13 myhost ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004

Oct 29 19:55:13 myhost usb usb5: configuration #1 chosen from 1 choice

Oct 29 19:55:13 myhost hub 5-0:1.0: USB hub found

Oct 29 19:55:13 myhost hub 5-0:1.0: 4 ports detected

Oct 29 19:55:13 myhost usb 3-2: USB disconnect, address 2

Oct 29 19:55:13 myhost ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

Oct 29 19:55:13 myhost firewire_ohci: Added fw-ohci device 0000:02:07.0, OHCI version 1.10

Oct 29 19:55:13 myhost Yenta: CardBus bridge found at 0000:02:06.0 [1025:0020]

Oct 29 19:55:13 myhost Yenta O2: res at 0x94/0xD4: 00/ea

Oct 29 19:55:13 myhost Yenta O2: enabling read prefetch/write burst

Oct 29 19:55:13 myhost input: PC Speaker as /devices/platform/pcspkr/input/input6

Oct 29 19:55:13 myhost Yenta: ISA IRQ mask 0x0818, PCI irq 10

Oct 29 19:55:13 myhost Socket status: 30000006

Oct 29 19:55:13 myhost Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06

Oct 29 19:55:13 myhost pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff

Oct 29 19:55:13 myhost cs: IO port probe 0x4000-0x5fff: clean.

Oct 29 19:55:13 myhost pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff

Oct 29 19:55:13 myhost pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff

Oct 29 19:55:13 myhost input: Video Bus as /devices/virtual/input/input7

Oct 29 19:55:13 myhost ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)

Oct 29 19:55:13 myhost usb 3-2: new low speed USB device using uhci_hcd and address 3

Oct 29 19:55:13 myhost Yenta: CardBus bridge found at 0000:02:06.1 [1025:0020]

Oct 29 19:55:13 myhost firewire_core: created new fw device fw0 (0 config rom retries, S400)

Oct 29 19:55:13 myhost usb 3-2: configuration #1 chosen from 1 choice

Oct 29 19:55:13 myhost Yenta: ISA IRQ mask 0x0818, PCI irq 10

Oct 29 19:55:13 myhost Socket status: 30000410

Oct 29 19:55:13 myhost Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a

Oct 29 19:55:13 myhost pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff

Oct 29 19:55:13 myhost cs: IO port probe 0x4000-0x5fff: clean.

Oct 29 19:55:13 myhost pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff

Oct 29 19:55:13 myhost pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff

Oct 29 19:55:13 myhost lp0: using parport0 (interrupt-driven).

Oct 29 19:55:13 myhost pccard: PCMCIA card inserted into slot 1

Oct 29 19:55:13 myhost cs: memory probe 0xe8200000-0xe87fffff: excluding 0xe8200000-0xe825ffff

Oct 29 19:55:13 myhost pcmcia: registering new device pcmcia1.0

Oct 29 19:55:13 myhost cs: IO port probe 0x100-0x3af: clean.

Oct 29 19:55:13 myhost cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7

Oct 29 19:55:13 myhost cs: IO port probe 0x820-0x8ff: clean.

Oct 29 19:55:13 myhost cs: IO port probe 0xc00-0xcf7: clean.

Oct 29 19:55:13 myhost cs: IO port probe 0x100-0x3af: clean.

Oct 29 19:55:13 myhost cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7

Oct 29 19:55:13 myhost cs: IO port probe 0xa00-0xaff: clean.

Oct 29 19:55:13 myhost cs: IO port probe 0x820-0x8ff: clean.

Oct 29 19:55:13 myhost cs: IO port probe 0xc00-0xcf7: clean.

Oct 29 19:55:13 myhost cs: IO port probe 0xa00-0xaff: clean.

Oct 29 19:55:13 myhost ppdev: user-space parallel port driver

Oct 29 19:55:13 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

Oct 29 19:55:13 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Oct 29 19:55:13 myhost Initializing USB Mass Storage driver...

Oct 29 19:55:13 myhost scsi2 : SCSI emulation for USB Mass Storage devices

Oct 29 19:55:13 myhost usbcore: registered new interface driver usb-storage

Oct 29 19:55:13 myhost USB Mass Storage support registered.

Oct 29 19:55:13 myhost usbcore: registered new interface driver hiddev

Oct 29 19:55:13 myhost input: Genius       Optical Mouse as /devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/input/input8

Oct 29 19:55:13 myhost input: USB HID v1.10 Mouse [Genius       Optical Mouse] on usb-0000:02:09.0-2

Oct 29 19:55:13 myhost usbcore: registered new interface driver usbhid

Oct 29 19:55:13 myhost drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

Oct 29 19:55:13 myhost Marking TSC unstable due to: possible TSC halt in C2.

Oct 29 19:55:13 myhost Time: acpi_pm clocksource has been installed.

Oct 29 19:55:13 myhost EXT3 FS on sda4, internal journal

Oct 29 19:55:13 myhost Adding 1028120k swap on /dev/sda5.  Priority:-1 extents:1 across:1028120k

Oct 29 19:55:14 myhost scsi 2:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2

Oct 29 19:55:14 myhost sd 2:0:0:0: [sdb] Attached SCSI removable disk

Oct 29 19:55:14 myhost sd 2:0:0:0: Attached scsi generic sg2 type 0

Oct 29 19:55:16 myhost dhcdbd: Started up.

Oct 29 19:55:17 myhost NetworkManager: <info>  starting...

Oct 29 19:55:17 myhost NetworkManager: <info>  eth0: Device is fully-supported using driver 'b44'.

Oct 29 19:55:17 myhost NetworkManager: <info>  nm_device_init(): waiting for device's worker thread to start

Oct 29 19:55:17 myhost NetworkManager: <info>  nm_device_init(): device's worker thread started, continuing.

Oct 29 19:55:17 myhost NetworkManager: <info>  Now managing wired Ethernet (802.3) device 'eth0'.

Oct 29 19:55:17 myhost NetworkManager: <info>  Deactivating device eth0.

Oct 29 19:55:17 myhost NetworkManager: <info>  nm_device_set_active_link start

Oct 29 19:55:17 myhost NetworkManager: <info>  nm_device_set_active_link start

Oct 29 19:55:17 myhost NetworkManager: <info>  nm_policy_device_change_check:: !old_dev && !new_dev!!

Oct 29 19:55:20 myhost b44: eth0: Link is up at 100 Mbps, full duplex.

Oct 29 19:55:20 myhost b44: eth0: Flow control is off for TX and off for RX.

Oct 29 19:55:20 myhost NetworkManager: <info>  nm_device_set_active_link start

Oct 29 19:55:20 myhost NetworkManager: <info>  Will activate wired connection 'eth0' because it now has a link.

Oct 29 19:55:20 myhost NetworkManager: <info>  SWITCH: no current connection, found better connection 'eth0'.

Oct 29 19:55:20 myhost NetworkManager: <info>  nm_policy_device_change_check:: lets try to switch device!

Oct 29 19:55:20 myhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason

Oct 29 19:55:20 myhost NetworkManager: <info>  Will activate connection 'eth0'.

Oct 29 19:55:20 myhost NetworkManager: <info>  Device eth0 activation scheduled...

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) started...

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) started...

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) complete.

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) starting...

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) successful.

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) complete.

Oct 29 19:55:20 myhost NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) started...

Oct 29 19:55:21 myhost NetworkManager: <info>  Activation (eth0) Beginning DHCP transaction.

Oct 29 19:55:21 myhost NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.

Oct 29 19:55:21 myhost NetworkManager: <info>  DHCP daemon state is now 12 (successfully started) for interface eth0

Oct 29 19:55:22 myhost NetworkManager: <info>  DHCP daemon state is now 1 (starting) for interface eth0

Oct 29 19:55:26 myhost dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4

Oct 29 19:55:27 myhost dhclient: DHCPOFFER from 192.168.1.1

Oct 29 19:55:27 myhost dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67

Oct 29 19:55:27 myhost dhclient: DHCPACK from 192.168.1.1

Oct 29 19:55:27 myhost dhclient: bound to 192.168.1.13 -- renewal in 233550 seconds.

Oct 29 19:55:27 myhost NetworkManager: <info>  DHCP daemon state is now 2 (bound) for interface eth0

Oct 29 19:55:27 myhost NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled...

Oct 29 19:55:27 myhost NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) started...

Oct 29 19:55:27 myhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name

Oct 29 19:55:27 myhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name

Oct 29 19:55:27 myhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain

Oct 29 19:55:27 myhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers

Oct 29 19:55:27 myhost NetworkManager: <info>  Retrieved the following IP4 configuration from the DHCP daemon:

Oct 29 19:55:27 myhost NetworkManager: <info>    address 192.168.1.13

Oct 29 19:55:27 myhost NetworkManager: <info>    netmask 255.255.255.0

Oct 29 19:55:27 myhost NetworkManager: <info>    broadcast 192.168.1.255

Oct 29 19:55:27 myhost NetworkManager: <info>    gateway 192.168.1.1

Oct 29 19:55:27 myhost NetworkManager: <info>    nameserver 192.168.1.1

Oct 29 19:55:27 myhost NetworkManager: <info>    nameserver 0.0.0.0

Oct 29 19:55:27 myhost NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...

Oct 29 19:55:27 myhost NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) complete.

Oct 29 19:55:27 myhost NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...

Oct 29 19:55:28 myhost NetworkManager: <info>  nm_device_set_active_link start

Oct 29 19:55:28 myhost NetworkManager: <info>  Activation (eth0) Finish handler scheduled.

Oct 29 19:55:28 myhost NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.

Oct 29 19:55:28 myhost NetworkManager: <info>  Activation (eth0) successful, device activated.

Oct 29 20:31:25 myhost [drm] Initialized drm 1.1.0 20060810

Oct 29 20:31:25 myhost ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:31:25 myhost [drm] Initialized radeon 1.28.0 20060524 on minor 0

Oct 29 20:31:27 myhost agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

Oct 29 20:31:27 myhost agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

Oct 29 20:31:27 myhost agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

Oct 29 20:31:28 myhost [drm] Setting GART location based on new memory map

Oct 29 20:31:28 myhost [drm] writeback test succeeded in 2 usecs

Oct 29 20:31:43 gconfd (temp-7133): démarrage (version 2.20.1), pid 7133 utilisateur « temp »

Oct 29 20:31:43 gconfd (temp-7133): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0

Oct 29 20:31:43 gconfd (temp-7133): Adresse « xml:readwrite:/home/temp/.gconf » résolue vers une source de configuration accessible en écriture à la position 1

Oct 29 20:31:43 gconfd (temp-7133): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2

Oct 29 20:31:45 myhost NET: Registered protocol family 10

Oct 29 20:31:45 myhost lo: Disabled Privacy Extensions

Oct 29 20:31:51 gconfd (temp-7133): Adresse « xml:readwrite:/home/temp/.gconf » résolue vers une source de configuration accessible en écriture à la position 0

Oct 29 20:31:54 myhost NetworkManager: <info>  Updating allowed wireless network lists.

Oct 29 20:31:54 myhost NetworkManager: <WARN>  nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored..

Oct 29 20:35:10 myhost shutdown[7254]: shutting down for system reboot

Oct 29 20:35:10 myhost init: Switching to runlevel: 6

Oct 29 20:35:12 myhost NetworkManager: <WARN>  nm_signal_handler(): Caught signal 15, shutting down normally.

Oct 29 20:35:12 myhost NetworkManager: <info>  Caught terminiation signal

Oct 29 20:35:12 myhost NetworkManager: <info>  Deactivating device eth0.

Oct 29 20:35:12 myhost dhclient: There is already a pid file /var/run/dhclient-eth0.pid with pid 7053

Oct 29 20:35:12 myhost dhclient: killed old client process, removed PID file

Oct 29 20:35:12 myhost dhclient: DHCPRELEASE on eth0 to 192.168.1.1 port 67

Oct 29 20:35:12 myhost dhcdbd: dbus_svc_init: dbus_bus_request_name failed: org.freedesktop.DBus.Error.AccessDenied Connection ":1.18" is not allowed to own the service "com.redhat.dhcp" due to security policies in the configuration file

Oct 29 20:36:04 myhost Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Sat Oct 27 09:04:14 UTC 2007

Oct 29 20:36:04 myhost BIOS-provided physical RAM map:

Oct 29 20:36:04 myhost BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

Oct 29 20:36:04 myhost BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

Oct 29 20:36:04 myhost BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)

Oct 29 20:36:04 myhost BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)

Oct 29 20:36:04 myhost BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data)

Oct 29 20:36:04 myhost BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS)

Oct 29 20:36:04 myhost BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)

Oct 29 20:36:04 myhost BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)

Oct 29 20:36:04 myhost BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

Oct 29 20:36:04 myhost 0MB HIGHMEM available.

Oct 29 20:36:04 myhost 511MB LOWMEM available.

Oct 29 20:36:04 myhost Zone PFN ranges:

Oct 29 20:36:04 myhost DMA             0 ->     4096

Oct 29 20:36:04 myhost Normal       4096 ->   130928

Oct 29 20:36:04 myhost HighMem    130928 ->   130928

Oct 29 20:36:04 myhost Movable zone start PFN for each node

Oct 29 20:36:04 myhost early_node_map[1] active PFN ranges

Oct 29 20:36:04 myhost 0:        0 ->   130928

Oct 29 20:36:04 myhost DMI present.

Oct 29 20:36:04 myhost ACPI: RSDP 000F5E80, 0014 (r0 ACER  )

Oct 29 20:36:04 myhost ACPI: RSDT 1FF75A7B, 002C (r1 ACER     RSDT   20020930  LTP        0)

Oct 29 20:36:04 myhost ACPI: FACP 1FF7BF64, 0074 (r1 ACER   IBIS     20020930 PTL        1E)

Oct 29 20:36:04 myhost ACPI: DSDT 1FF75AA7, 64BD (r1 ACER   IBIS     20020930 MSFT  100000E)

Oct 29 20:36:04 myhost ACPI: FACS 1FF7CFC0, 0040

Oct 29 20:36:04 myhost ACPI: BOOT 1FF7BFD8, 0028 (r1 ACER   IBIS     20020930  LTP        1)

Oct 29 20:36:04 myhost ACPI: PM-Timer IO Port: 0x1008

Oct 29 20:36:04 myhost Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)

Oct 29 20:36:04 myhost swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

Oct 29 20:36:04 myhost swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d8000

Oct 29 20:36:04 myhost swsusp: Registered nosave memory region: 00000000000d8000 - 0000000000100000

Oct 29 20:36:04 myhost Built 1 zonelists in Zone order.  Total pages: 129906

Oct 29 20:36:04 myhost Kernel command line: root=/dev/sda4 ro

Oct 29 20:36:04 myhost Local APIC disabled by BIOS -- you can enable it with "lapic"

Oct 29 20:36:04 myhost Enabling fast FPU save and restore... done.

Oct 29 20:36:04 myhost Enabling unmasked SIMD FPU exception support... done.

Oct 29 20:36:04 myhost Initializing CPU#0

Oct 29 20:36:04 myhost PID hash table entries: 2048 (order: 11, 8192 bytes)

Oct 29 20:36:04 myhost Detected 2193.051 MHz processor.

Oct 29 20:36:04 myhost Console: colour VGA+ 80x25

Oct 29 20:36:04 myhost console [tty0] enabled

Oct 29 20:36:04 myhost Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Oct 29 20:36:04 myhost Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Oct 29 20:36:04 myhost Memory: 513236k/523712k available (2442k kernel code, 9876k reserved, 814k data, 296k init, 0k highmem)

Oct 29 20:36:04 myhost virtual kernel memory layout:

Oct 29 20:36:04 myhost fixmap  : 0xfff80000 - 0xfffff000   ( 508 kB)

Oct 29 20:36:04 myhost pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

Oct 29 20:36:04 myhost vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)

Oct 29 20:36:04 myhost lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)

Oct 29 20:36:04 myhost .init : 0xc0435000 - 0xc047f000   ( 296 kB)

Oct 29 20:36:04 myhost .data : 0xc0362829 - 0xc042e21c   ( 814 kB)

Oct 29 20:36:04 myhost .text : 0xc0100000 - 0xc0362829   (2442 kB)

Oct 29 20:36:04 myhost Checking if this processor honours the WP bit even in supervisor mode... Ok.

Oct 29 20:36:04 myhost SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1

Oct 29 20:36:04 myhost Calibrating delay using timer specific routine.. 4390.70 BogoMIPS (lpj=7314733)

Oct 29 20:36:04 myhost Security Framework v1.0.0 initialized

Oct 29 20:36:04 myhost Mount-cache hash table entries: 512

Oct 29 20:36:04 myhost CPU: Trace cache: 12K uops, L1 D cache: 8K

Oct 29 20:36:04 myhost CPU: L2 cache: 512K

Oct 29 20:36:04 myhost CPU: Hyper-Threading is disabled

Oct 29 20:36:04 myhost Intel machine check architecture supported.

Oct 29 20:36:04 myhost Intel machine check reporting enabled on CPU#0.

Oct 29 20:36:04 myhost CPU0: Intel P4/Xeon Extended MCE MSRs (12) available

Oct 29 20:36:04 myhost CPU0: Thermal monitoring enabled

Oct 29 20:36:04 myhost Compat vDSO mapped to ffffe000.

Oct 29 20:36:04 myhost Checking 'hlt' instruction... OK.

Oct 29 20:36:04 myhost SMP alternatives: switching to UP code

Oct 29 20:36:04 myhost Freeing SMP alternatives: 11k freed

Oct 29 20:36:04 myhost Early unpacking initramfs... done

Oct 29 20:36:04 myhost ACPI: Core revision 20070126

Oct 29 20:36:04 myhost ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

Oct 29 20:36:04 myhost ACPI: setting ELCR to 0200 (from 0420)

Oct 29 20:36:04 myhost CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07

Oct 29 20:36:04 myhost SMP motherboard not detected.

Oct 29 20:36:04 myhost Local APIC not detected. Using dummy APIC emulation.

Oct 29 20:36:04 myhost Brought up 1 CPUs

Oct 29 20:36:04 myhost Booting paravirtualized kernel on bare hardware

Oct 29 20:36:04 myhost NET: Registered protocol family 16

Oct 29 20:36:04 myhost ACPI: bus type pci registered

Oct 29 20:36:04 myhost PCI: PCI BIOS revision 2.10 entry at 0xfd731, last bus=2

Oct 29 20:36:04 myhost PCI: Using configuration type 1

Oct 29 20:36:04 myhost Setting up standard PCI resources

Oct 29 20:36:04 myhost ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62

Oct 29 20:36:04 myhost ACPI: Interpreter enabled

Oct 29 20:36:04 myhost ACPI: (supports S0 S3 S4 S5)

Oct 29 20:36:04 myhost ACPI: Using PIC for interrupt routing

Oct 29 20:36:04 myhost ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62

Oct 29 20:36:04 myhost ACPI: PCI Root Bridge [PCI0] (0000:00)

Oct 29 20:36:04 myhost PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO

Oct 29 20:36:04 myhost PCI quirk: region 1180-11bf claimed by ICH4 GPIO

Oct 29 20:36:04 myhost PCI: Transparent bridge - 0000:00:1e.0

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKA] (IRQs *10)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKB] (IRQs *10)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKC] (IRQs *10)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKD] (IRQs *5)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.

Oct 29 20:36:04 myhost ACPI: Power Resource [PFN0] (off)

Oct 29 20:36:04 myhost ACPI: Power Resource [PFN1] (off)

Oct 29 20:36:04 myhost Linux Plug and Play Support v0.97 (c) Adam Belay

Oct 29 20:36:04 myhost pnp: PnP ACPI init

Oct 29 20:36:04 myhost ACPI: bus type pnp registered

Oct 29 20:36:04 myhost pnp: PnP ACPI: found 10 devices

Oct 29 20:36:04 myhost ACPI: ACPI bus type pnp unregistered

Oct 29 20:36:04 myhost SCSI subsystem initialized

Oct 29 20:36:04 myhost PCI: Using ACPI for IRQ routing

Oct 29 20:36:04 myhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

Oct 29 20:36:04 myhost NetLabel: Initializing

Oct 29 20:36:04 myhost NetLabel:  domain hash size = 128

Oct 29 20:36:04 myhost NetLabel:  protocols = UNLABELED CIPSOv4

Oct 29 20:36:04 myhost NetLabel:  unlabeled traffic allowed by default

Oct 29 20:36:04 myhost Time: tsc clocksource has been installed.

Oct 29 20:36:04 myhost pnp: 00:01: iomem range 0xff800000-0xffbfffff could not be reserved

Oct 29 20:36:04 myhost pnp: 00:01: iomem range 0xfebff100-0xfebffbff has been reserved

Oct 29 20:36:04 myhost pnp: 00:01: iomem range 0xfff00000-0xffffffff could not be reserved

Oct 29 20:36:04 myhost pnp: 00:01: iomem range 0x0-0x9ffff could not be reserved

Oct 29 20:36:04 myhost PCI: Bridge: 0000:00:01.0

Oct 29 20:36:04 myhost IO window: 3000-3fff

Oct 29 20:36:04 myhost MEM window: e8100000-e81fffff

Oct 29 20:36:04 myhost PREFETCH window: f0000000-f7ffffff

Oct 29 20:36:04 myhost PCI: Bus 3, cardbus bridge: 0000:02:06.0

Oct 29 20:36:04 myhost IO window: 00004000-000040ff

Oct 29 20:36:04 myhost IO window: 00004400-000044ff

Oct 29 20:36:04 myhost PREFETCH window: 30000000-33ffffff

Oct 29 20:36:04 myhost MEM window: 38000000-3bffffff

Oct 29 20:36:04 myhost PCI: Bus 7, cardbus bridge: 0000:02:06.1

Oct 29 20:36:04 myhost IO window: 00004800-000048ff

Oct 29 20:36:04 myhost IO window: 00004c00-00004cff

Oct 29 20:36:04 myhost PREFETCH window: 34000000-37ffffff

Oct 29 20:36:04 myhost MEM window: 3c000000-3fffffff

Oct 29 20:36:04 myhost PCI: Bridge: 0000:00:1e.0

Oct 29 20:36:04 myhost IO window: 4000-5fff

Oct 29 20:36:04 myhost MEM window: e8200000-e87fffff

Oct 29 20:36:04 myhost PREFETCH window: 30000000-37ffffff

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost PCI: Enabling device 0000:02:06.1 (0104 -> 0107)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost NET: Registered protocol family 2

Oct 29 20:36:04 myhost IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

Oct 29 20:36:04 myhost TCP established hash table entries: 16384 (order: 6, 262144 bytes)

Oct 29 20:36:04 myhost TCP bind hash table entries: 16384 (order: 5, 196608 bytes)

Oct 29 20:36:04 myhost TCP: Hash tables configured (established 16384 bind 16384)

Oct 29 20:36:04 myhost TCP reno registered

Oct 29 20:36:04 myhost checking if image is initramfs... it is

Oct 29 20:36:04 myhost Freeing initrd memory: 1443k freed

Oct 29 20:36:04 myhost Simple Boot Flag at 0x36 set to 0x1

Oct 29 20:36:04 myhost apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

Oct 29 20:36:04 myhost apm: overridden by ACPI.

Oct 29 20:36:04 myhost VFS: Disk quotas dquot_6.5.1

Oct 29 20:36:04 myhost Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Oct 29 20:36:04 myhost Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

Oct 29 20:36:04 myhost Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

Oct 29 20:36:04 myhost io scheduler noop registered

Oct 29 20:36:04 myhost io scheduler anticipatory registered

Oct 29 20:36:04 myhost io scheduler deadline registered

Oct 29 20:36:04 myhost io scheduler cfq registered (default)

Oct 29 20:36:04 myhost isapnp: Scanning for PnP cards...

Oct 29 20:36:04 myhost Switched to high resolution mode on CPU 0

Oct 29 20:36:04 myhost isapnp: No Plug & Play device found

Oct 29 20:36:04 myhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled

Oct 29 20:36:04 myhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Oct 29 20:36:04 myhost 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost ACPI: PCI interrupt for device 0000:00:1f.6 disabled

Oct 29 20:36:04 myhost RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize

Oct 29 20:36:04 myhost loop: module loaded

Oct 29 20:36:04 myhost input: Macintosh mouse button emulation as /devices/virtual/input/input0

Oct 29 20:36:04 myhost PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12

Oct 29 20:36:04 myhost serio: i8042 KBD port at 0x60,0x64 irq 1

Oct 29 20:36:04 myhost serio: i8042 AUX port at 0x60,0x64 irq 12

Oct 29 20:36:04 myhost mice: PS/2 mouse device common for all mice

Oct 29 20:36:04 myhost input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

Oct 29 20:36:04 myhost TCP cubic registered

Oct 29 20:36:04 myhost NET: Registered protocol family 1

Oct 29 20:36:04 myhost NET: Registered protocol family 17

Oct 29 20:36:04 myhost Using IPI No-Shortcut mode

Oct 29 20:36:04 myhost Freeing unused kernel memory: 296k freed

Oct 29 20:36:04 myhost PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost scsi0 : ata_piix

Oct 29 20:36:04 myhost scsi1 : ata_piix

Oct 29 20:36:04 myhost ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14

Oct 29 20:36:04 myhost ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15

Oct 29 20:36:04 myhost ata1.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100

Oct 29 20:36:04 myhost ata1.00: 156301488 sectors, multi 16: LBA48 

Oct 29 20:36:04 myhost ata1.00: configured for UDMA/100

Oct 29 20:36:04 myhost ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UX08, max UDMA/33

Oct 29 20:36:04 myhost ata2.00: configured for UDMA/33

Oct 29 20:36:04 myhost scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5

Oct 29 20:36:04 myhost scsi 1:0:0:0: CD-ROM            QSI      CDRW/DVD SBW-242 UX08 PQ: 0 ANSI: 5

Oct 29 20:36:04 myhost sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)

Oct 29 20:36:04 myhost sd 0:0:0:0: [sda] Write Protect is off

Oct 29 20:36:04 myhost sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Oct 29 20:36:04 myhost sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)

Oct 29 20:36:04 myhost sd 0:0:0:0: [sda] Write Protect is off

Oct 29 20:36:04 myhost sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Oct 29 20:36:04 myhost sda: sda1 sda2 sda3 < sda5 > sda4

Oct 29 20:36:04 myhost sd 0:0:0:0: [sda] Attached SCSI disk

Oct 29 20:36:04 myhost sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray

Oct 29 20:36:04 myhost Uniform CD-ROM driver Revision: 3.20

Oct 29 20:36:04 myhost EXT3-fs: mounted filesystem with ordered data mode.

Oct 29 20:36:04 myhost kjournald starting.  Commit interval 5 seconds

Oct 29 20:36:04 myhost usbcore: registered new interface driver usbfs

Oct 29 20:36:04 myhost usbcore: registered new interface driver hub

Oct 29 20:36:04 myhost usbcore: registered new device driver usb

Oct 29 20:36:04 myhost b44.c:v1.01 (Jun 16, 2006)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5

Oct 29 20:36:04 myhost eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:26:ba:72

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost intel8x0_measure_ac97_clock: measured 52649 usecs

Oct 29 20:36:04 myhost intel8x0: clocking to 48000

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost ACPI: AC Adapter [ACAD] (on-line)

Oct 29 20:36:04 myhost ACPI: Battery Slot [BAT1] (battery present)

Oct 29 20:36:04 myhost ACPI: Battery Slot [BAT2] (battery absent)

Oct 29 20:36:04 myhost input: Power Button (FF) as /devices/virtual/input/input2

Oct 29 20:36:04 myhost ACPI: Power Button (FF) [PWRF]

Oct 29 20:36:04 myhost input: Lid Switch as /devices/virtual/input/input3

Oct 29 20:36:04 myhost ACPI: Lid Switch [LID]

Oct 29 20:36:04 myhost input: Sleep Button (CM) as /devices/virtual/input/input4

Oct 29 20:36:04 myhost ACPI: Sleep Button (CM) [SLPB]

Oct 29 20:36:04 myhost ACPI: Transitioning device [FAN0] to D3

Oct 29 20:36:04 myhost ACPI: Transitioning device [FAN0] to D3

Oct 29 20:36:04 myhost ACPI: Fan [FAN0] (off)

Oct 29 20:36:04 myhost ACPI: Transitioning device [FAN1] to D3

Oct 29 20:36:04 myhost ACPI: Transitioning device [FAN1] to D3

Oct 29 20:36:04 myhost ACPI: Fan [FAN1] (off)

Oct 29 20:36:04 myhost ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])

Oct 29 20:36:04 myhost ACPI: Thermal Zone [THRM] (57 C)

Oct 29 20:36:04 myhost PPP generic driver version 2.4.2

Oct 29 20:36:04 myhost sd 0:0:0:0: Attached scsi generic sg0 type 0

Oct 29 20:36:04 myhost sr 1:0:0:0: Attached scsi generic sg1 type 5

Oct 29 20:36:04 myhost pci_hotplug: PCI Hot Plug PCI Core version: 0.5

Oct 29 20:36:04 myhost shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

Oct 29 20:36:04 myhost Linux agpgart interface v0.102

Oct 29 20:36:04 myhost agpgart: Detected an Intel 845G Chipset.

Oct 29 20:36:04 myhost USB Universal Host Controller Interface driver v3.0

Oct 29 20:36:04 myhost agpgart: AGP aperture is 64M @ 0xec000000

Oct 29 20:36:04 myhost PCI: Enabling device 0000:00:1d.0 (0004 -> 0005)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost uhci_hcd 0000:00:1d.0: UHCI Host Controller

Oct 29 20:36:04 myhost uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

Oct 29 20:36:04 myhost uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800

Oct 29 20:36:04 myhost usb usb1: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost hub 1-0:1.0: USB hub found

Oct 29 20:36:04 myhost hub 1-0:1.0: 2 ports detected

Oct 29 20:36:04 myhost PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5

Oct 29 20:36:04 myhost uhci_hcd 0000:00:1d.1: UHCI Host Controller

Oct 29 20:36:04 myhost uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

Oct 29 20:36:04 myhost uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820

Oct 29 20:36:04 myhost usb usb2: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost hub 2-0:1.0: USB hub found

Oct 29 20:36:04 myhost hub 2-0:1.0: 2 ports detected

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost uhci_hcd 0000:02:09.0: UHCI Host Controller

Oct 29 20:36:04 myhost uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 3

Oct 29 20:36:04 myhost uhci_hcd 0000:02:09.0: irq 10, io base 0x00005000

Oct 29 20:36:04 myhost usb usb3: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost hub 3-0:1.0: USB hub found

Oct 29 20:36:04 myhost hub 3-0:1.0: 2 ports detected

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:02:09.1[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost uhci_hcd 0000:02:09.1: UHCI Host Controller

Oct 29 20:36:04 myhost uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 4

Oct 29 20:36:04 myhost uhci_hcd 0000:02:09.1: irq 10, io base 0x00005020

Oct 29 20:36:04 myhost usb usb4: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost hub 4-0:1.0: USB hub found

Oct 29 20:36:04 myhost hub 4-0:1.0: 2 ports detected

Oct 29 20:36:04 myhost parport_pc 00:08: reported by Plug and Play ACPI

Oct 29 20:36:04 myhost parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost usb 2-2: new full speed USB device using uhci_hcd and address 2

Oct 29 20:36:04 myhost usb 2-2: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost usb 3-2: new low speed USB device using uhci_hcd and address 2

Oct 29 20:36:04 myhost rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

Oct 29 20:36:04 myhost rtc0: alarms up to one month, y3k

Oct 29 20:36:04 myhost Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006

Oct 29 20:36:04 myhost input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5

Oct 29 20:36:04 myhost usb 3-2: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:02:09.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost ehci_hcd 0000:02:09.2: EHCI Host Controller

Oct 29 20:36:04 myhost ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 5

Oct 29 20:36:04 myhost ehci_hcd 0000:02:09.2: irq 10, io mem 0xe8208800

Oct 29 20:36:04 myhost ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004

Oct 29 20:36:04 myhost usb usb5: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost hub 5-0:1.0: USB hub found

Oct 29 20:36:04 myhost hub 5-0:1.0: 4 ports detected

Oct 29 20:36:04 myhost usb 3-2: USB disconnect, address 2

Oct 29 20:36:04 myhost ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10

Oct 29 20:36:04 myhost firewire_ohci: Added fw-ohci device 0000:02:07.0, OHCI version 1.10

Oct 29 20:36:04 myhost Yenta: CardBus bridge found at 0000:02:06.0 [1025:0020]

Oct 29 20:36:04 myhost Yenta O2: res at 0x94/0xD4: 00/ea

Oct 29 20:36:04 myhost Yenta O2: enabling read prefetch/write burst

Oct 29 20:36:04 myhost input: Video Bus as /devices/virtual/input/input6

Oct 29 20:36:04 myhost ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)

Oct 29 20:36:04 myhost input: PC Speaker as /devices/platform/pcspkr/input/input7

Oct 29 20:36:04 myhost Yenta: ISA IRQ mask 0x0818, PCI irq 10

Oct 29 20:36:04 myhost Socket status: 30000006

Oct 29 20:36:04 myhost Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06

Oct 29 20:36:04 myhost pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff

Oct 29 20:36:04 myhost cs: IO port probe 0x4000-0x5fff: clean.

Oct 29 20:36:04 myhost pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff

Oct 29 20:36:04 myhost pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff

Oct 29 20:36:04 myhost lp0: using parport0 (interrupt-driven).

Oct 29 20:36:04 myhost usb 3-2: new low speed USB device using uhci_hcd and address 3

Oct 29 20:36:04 myhost Yenta: CardBus bridge found at 0000:02:06.1 [1025:0020]

Oct 29 20:36:04 myhost usb 3-2: configuration #1 chosen from 1 choice

Oct 29 20:36:04 myhost firewire_core: created new fw device fw0 (0 config rom retries, S400)

Oct 29 20:36:04 myhost Yenta: ISA IRQ mask 0x0818, PCI irq 10

Oct 29 20:36:04 myhost Socket status: 30000410

Oct 29 20:36:04 myhost Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a

Oct 29 20:36:04 myhost pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff

Oct 29 20:36:04 myhost cs: IO port probe 0x4000-0x5fff: clean.

Oct 29 20:36:04 myhost pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff

Oct 29 20:36:04 myhost pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff

Oct 29 20:36:04 myhost pccard: PCMCIA card inserted into slot 1

Oct 29 20:36:04 myhost cs: memory probe 0xe8200000-0xe87fffff: excluding 0xe8200000-0xe825ffff

Oct 29 20:36:04 myhost pcmcia: registering new device pcmcia1.0

Oct 29 20:36:04 myhost ppdev: user-space parallel port driver

Oct 29 20:36:04 myhost cs: IO port probe 0x100-0x3af: clean.

Oct 29 20:36:04 myhost cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7

Oct 29 20:36:04 myhost cs: IO port probe 0x820-0x8ff: clean.

Oct 29 20:36:04 myhost cs: IO port probe 0xc00-0xcf7: clean.

Oct 29 20:36:04 myhost cs: IO port probe 0xa00-0xaff: clean.

Oct 29 20:36:04 myhost cs: IO port probe 0x100-0x3af: clean.

Oct 29 20:36:04 myhost cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7

Oct 29 20:36:04 myhost cs: IO port probe 0x820-0x8ff: clean.

Oct 29 20:36:04 myhost cs: IO port probe 0xc00-0xcf7: clean.

Oct 29 20:36:04 myhost cs: IO port probe 0xa00-0xaff: clean.

Oct 29 20:36:04 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

Oct 29 20:36:04 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Oct 29 20:36:04 myhost Initializing USB Mass Storage driver...

Oct 29 20:36:04 myhost scsi2 : SCSI emulation for USB Mass Storage devices

Oct 29 20:36:04 myhost usbcore: registered new interface driver usb-storage

Oct 29 20:36:04 myhost USB Mass Storage support registered.

Oct 29 20:36:04 myhost usbcore: registered new interface driver hiddev

Oct 29 20:36:04 myhost input: Genius       Optical Mouse as /devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/input/input8

Oct 29 20:36:04 myhost input: USB HID v1.10 Mouse [Genius       Optical Mouse] on usb-0000:02:09.0-2

Oct 29 20:36:04 myhost usbcore: registered new interface driver usbhid

Oct 29 20:36:04 myhost drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

Oct 29 20:36:04 myhost Marking TSC unstable due to: possible TSC halt in C2.

Oct 29 20:36:04 myhost Time: acpi_pm clocksource has been installed.

Oct 29 20:36:04 myhost EXT3 FS on sda4, internal journal

Oct 29 20:36:04 myhost Adding 1028120k swap on /dev/sda5.  Priority:-1 extents:1 across:1028120k

Oct 29 20:36:04 myhost scsi 2:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2

Oct 29 20:36:04 myhost sd 2:0:0:0: [sdb] Attached SCSI removable disk

Oct 29 20:36:04 myhost sd 2:0:0:0: Attached scsi generic sg2 type 0

Oct 29 20:36:07 myhost dhcdbd: Started up.

Oct 29 20:36:08 myhost NetworkManager: <info>  starting...

Oct 29 20:36:08 myhost NetworkManager: <info>  eth0: Device is fully-supported using driver 'b44'.

Oct 29 20:36:08 myhost NetworkManager: <info>  nm_device_init(): waiting for device's worker thread to start

Oct 29 20:36:08 myhost NetworkManager: <info>  nm_device_init(): device's worker thread started, continuing.

Oct 29 20:36:08 myhost NetworkManager: <info>  Now managing wired Ethernet (802.3) device 'eth0'.

Oct 29 20:36:08 myhost NetworkManager: <info>  Deactivating device eth0.

Oct 29 20:36:08 myhost NetworkManager: <info>  nm_device_set_active_link start

Oct 29 20:36:08 myhost NetworkManager: <info>  nm_device_set_active_link start

Oct 29 20:36:08 myhost NetworkManager: <info>  nm_policy_device_change_check:: !old_dev && !new_dev!!

Oct 29 20:36:11 myhost b44: eth0: Link is up at 100 Mbps, full duplex.

Oct 29 20:36:11 myhost b44: eth0: Flow control is off for TX and off for RX.

Oct 29 20:36:11 myhost NetworkManager: <info>  nm_device_set_active_link start

Oct 29 20:36:11 myhost NetworkManager: <info>  Will activate wired connection 'eth0' because it now has a link.

Oct 29 20:36:11 myhost NetworkManager: <info>  SWITCH: no current connection, found better connection 'eth0'.

Oct 29 20:36:11 myhost NetworkManager: <info>  nm_policy_device_change_check:: lets try to switch device!

Oct 29 20:36:11 myhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason

Oct 29 20:36:11 myhost NetworkManager: <info>  Will activate connection 'eth0'.

Oct 29 20:36:11 myhost NetworkManager: <info>  Device eth0 activation scheduled...

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) started...

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) started...

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) complete.

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) starting...

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) successful.

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) complete.

Oct 29 20:36:11 myhost NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) started...

Oct 29 20:36:12 myhost NetworkManager: <info>  Activation (eth0) Beginning DHCP transaction.

Oct 29 20:36:12 myhost NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.

Oct 29 20:36:12 myhost NetworkManager: <info>  DHCP daemon state is now 12 (successfully started) for interface eth0

Oct 29 20:36:13 myhost NetworkManager: <info>  DHCP daemon state is now 1 (starting) for interface eth0

Oct 29 20:36:13 myhost dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6

Oct 29 20:36:14 myhost dhclient: DHCPOFFER from 192.168.1.1

Oct 29 20:36:14 myhost dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67

Oct 29 20:36:14 myhost dhclient: DHCPACK from 192.168.1.1

Oct 29 20:36:14 myhost dhclient

_alexmyself · Message par **_alexmyself** » lun. 29 oct. 2007, 21:49

éssaie de rajouter l'option de démarrage: noapic
au bout de la ligne kernel dans /boot/grub/menu.lst

chez moi ce fut un miracle

ah et j'ai une 7500 aussi
xorg.conf

Code : Tout sélectionner

Section "ServerLayout"
	Identifier	"Xorg Configured"
	Screen	0	"Screen-radeon"	0 0
	InputDevice	"keyboard_fr"	"CoreKeyboard"
	InputDevice	"touchpad"	"AlwaysCore"
	#pour beryl / radeon
	Option 		"AIGLX" 	"true"
EndSection


Section "ServerFlags"
	Option "AllowMouseOpenFail"  "true"
EndSection




Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc:unscaled"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/75dpi"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/100dpi"

# Additional fonts: Locale, Gimp, TTF...
	FontPath     "/usr/share/fonts/cyrillic"

# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/TTF
EndSection



Section "Module"
	#touchpad
	Load  "synaptics"

	Load  "extmod"

# charger si driver radeon
	Load  "glx"
	Load  "dri"
EndSection






Section "InputDevice"
	Identifier  "keyboard_fr"
	Driver      "keyboard"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr-latin9"
	Option	    "XkbVariant" "nodeadkeys"
EndSection


Section "InputDevice"
  Driver  	"synaptics"
  Identifier  	"touchpad"
  Option	"Device"  		"/dev/psaux"
  Option	"Protocol"		"auto-dev"
  Option	"LeftEdge"		"120"
  Option	"RightEdge"		"830"
  Option	"TopEdge"		"120"
  Option	"BottomEdge"		"650"
  Option	"FingerLow"		"14"
  Option	"FingerHigh"		"15"
  Option	"MaxTapTime"		"180"
  Option	"MaxTapMove"		"110"
  Option	"EmulateMidButtonTime"	"75"
  Option	"VertScrollDelta"	"20"
  Option	"HorizScrollDelta"	"20"
  Option	"MinSpeed"		"0.3"
  Option	"MaxSpeed"		"0.75"
  Option	"AccelFactor"		"0.015"
  Option	"EdgeMotionMinSpeed"	"200"
  Option	"EdgeMotionMaxSpeed"	"200"
  Option	"UpDownScrolling"	"1"
  Option	"CircularScrolling"	"1"
  Option	"CircScrollDelta"	"0.1"
  Option	"CircScrollTrigger"	"2"
EndSection




############################################################################################
# RADEON
############################################################################################
Section "Monitor"
	Identifier	"Monitor-radeon"
	VendorName	"Monitor toshiba"
	ModelName	"LCD 1280x800"
	# la formule du displaysize: (1280 x 25,4) / 75 ou 96, arrondir a l'inférieur, évite les problèmes de polices, idem pour verticale
	DisplaySize	432 270
EndSection

Section "Device"
	Identifier	"Videocard-radeon"
	Driver		"radeon"
	VendorName	"ATI"
	BoardName	"ATI Mobility Radeon 9700"
	Option		"AGPMode"	"8"

	#pour beryl
	Option "XAANoOffscreenPixmaps" "true"
EndSection

Section "Screen"
	Identifier "Screen-radeon"
	Device     "Videocard-radeon"
	Monitor    "Monitor-radeon"
EndSection

#pour beryl
Section "Extensions"
  Option "Composite" "Enable"
EndSection
############################################################################################
# /RADEON
############################################################################################






############################################################################################
# FGLRX
############################################################################################
Section "Monitor"
	Identifier "Monitor-fglrx"
	VendorName   "Monitor toshiba"
	ModelName    "LCD 1280x800"
EndSection


Section "Device"
	Identifier  "Videocard-fglrx"
	Driver      "fglrx"
EndSection


Section "Screen"
	Identifier "Screen-fglrx"
	Device     "Videocard-fglrx"
	Monitor    "Monitor-fglrx"
	DefaultColorDepth 24
EndSection
############################################################################################
# /FGLRX
############################################################################################

Arch Linux

Archlinux.fr [Forums]

freeze du pc

freeze du pc