[veille] Mise en veille qui se réveille tout de suite

ppr · Message par **ppr** » mer. 20 juin 2012, 11:27

Bonjour,

Après une installation fraiche d'archlinux + xfce, la mise en veille ne fonctionne pas. L'ordinateur se met bien en veille (même s'il prend bien 30s pour y arriver) mais n'y reste pas (il se réveille dès que la veille est atteinte). J'ai essayé la méthode pm-utils (avec la commande pm-suspend) et aussi uswsusp (avec s2ram -f). Le problème semble exactement le même pour les deux méthodes.

Je soupçonne que le problème vient de ma carte graphique qui fonctionne avec les pilotes propriétaire catalyst de chez ATI.

J'ai essayé d'obliger les modules uhci_hd, button et ehci_hd a être explicitement déchargés en les ajoutant à SUSPEND_MODULES dans /etc/pm/config.d/modules. J'ai aussi essayé d'ajouter au démarrage du kernel (/boot/grub/menu.lst) les options acpi_sleep=nonvs et vga=0. Rien de cela n'a marché.

Pourtant, sous debian unstable, la mise en veille marchait bien (même avec les drivers catalyst). Ça doit donc être possible de la faire marcher sous arch.

Voici ce que me dit dmesg quand je met en veille :

Code : Tout sélectionner

[ 1716.761955] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 1717.612246] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 1717.999915] wlan0: deauthenticating from 00:23:5e:79:86:b2 by local choice (reason=3)
[ 1718.081092] cfg80211: Calling CRDA for country: FR
[ 1721.938180] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1722.175872] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1726.068161] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1730.144801] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1730.216594] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1731.061490] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_r6xx.c at line: 79
[ 1731.074646] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_r6xx.c at line: 79
[ 1731.084926] Assertion failed in ../../../../../../../../drivers/2d/lnx/fgl/drm/kernel/hal_r6xx.c at line: 79
[ 1731.329620] PM: Syncing filesystems ... done.
[ 1731.416344] PM: Preparing system for mem sleep
[ 1731.417636] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1731.429933] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1731.443217] PM: Entering mem sleep
[ 1731.443245] Suspending console(s) (use no_console_suspend to debug)
[ 1731.464488] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1731.464761] ------------[ cut here ]------------
[ 1731.464785] WARNING: at net/mac80211/driver-ops.h:10 ieee80211_do_stop+0x7e5/0x800 [mac80211]()
[ 1731.464788] Hardware name: W760SUA                         
[ 1731.464790] Modules linked in: aes_x86_64 cryptd aes_generic fuse usbhid hid arc4 rtl8187 eeprom_93cx6 mac80211 cfg80211 joydev snd_hda_codec_realtek rfkill fglrx(PO) uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media amd_iommu_v2 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore radeon i2c_algo_bit drm_kms_helper sis190 ttm mii microcode drm sdhci_pci sdhci i2c_core mmc_core sis_agp serio_raw psmouse pcspkr jmb38x_ms memstick battery ac processor wmi coretemp evdev video thermal button ext4 crc16 jbd2 mbcache sd_mod sr_mod cdrom pata_acpi sata_sis pata_sis ata_generic ohci_hcd ehci_hcd libata scsi_mod usbcore usb_common
[ 1731.464845] Pid: 3246, comm: kworker/u:0 Tainted: P        W  O 3.4.3-1-ARCH #1
[ 1731.464848] Call Trace:
[ 1731.464857]  [<ffffffff810515cf>] warn_slowpath_common+0x7f/0xc0
[ 1731.464861]  [<ffffffff8105162a>] warn_slowpath_null+0x1a/0x20
[ 1731.464871]  [<ffffffffa0a6b3d5>] ieee80211_do_stop+0x7e5/0x800 [mac80211]
[ 1731.464877]  [<ffffffff8138cdf9>] ? dev_deactivate_many+0x209/0x260
[ 1731.464887]  [<ffffffffa0a6b40a>] ieee80211_stop+0x1a/0x20 [mac80211]
[ 1731.464892]  [<ffffffff8136c585>] __dev_close_many+0x85/0xd0
[ 1731.464895]  [<ffffffff8136c6c0>] dev_close_many+0xa0/0x110
[ 1731.464898]  [<ffffffff8136c818>] rollback_registered_many+0xe8/0x260
[ 1731.464902]  [<ffffffff8136c9ab>] unregister_netdevice_many+0x1b/0x80
[ 1731.464911]  [<ffffffffa0a6a860>] ieee80211_remove_interfaces+0xd0/0x110 [mac80211]
[ 1731.464919]  [<ffffffffa0a5a133>] ieee80211_unregister_hw+0x53/0x120 [mac80211]
[ 1731.464924]  [<ffffffffa0ae65da>] rtl8187_disconnect+0x36/0x73 [rtl8187]
[ 1731.464940]  [<ffffffffa0011470>] usb_unbind_interface+0x50/0x180 [usbcore]
[ 1731.464946]  [<ffffffff8130f58c>] __device_release_driver+0x7c/0xe0
[ 1731.464949]  [<ffffffff8130f61c>] device_release_driver+0x2c/0x40
[ 1731.464958]  [<ffffffffa0011630>] usb_driver_release_interface+0x90/0xa0 [usbcore]
[ 1731.464966]  [<ffffffffa0011664>] usb_forced_unbind_intf+0x24/0x30 [usbcore]
[ 1731.464973]  [<ffffffffa00117ba>] usb_suspend+0x7a/0x140 [usbcore]
[ 1731.464980]  [<ffffffffa0004180>] ? usb_dev_freeze+0x20/0x20 [usbcore]
[ 1731.464987]  [<ffffffffa0004193>] usb_dev_suspend+0x13/0x20 [usbcore]
[ 1731.464993]  [<ffffffff81316a4b>] dpm_run_callback.isra.4+0x3b/0x70
[ 1731.464996]  [<ffffffff8131748e>] __device_suspend+0xae/0x240
[ 1731.465000]  [<ffffffff8131763f>] async_suspend+0x1f/0xa0
[ 1731.465006]  [<ffffffff8107ab7e>] async_run_entry_fn+0x7e/0x170
[ 1731.465011]  [<ffffffff8106d4ca>] process_one_work+0x12a/0x440
[ 1731.465014]  [<ffffffff8107ab00>] ? async_schedule+0x20/0x20
[ 1731.465018]  [<ffffffff8106dd2e>] worker_thread+0x12e/0x2d0
[ 1731.465021]  [<ffffffff8106dc00>] ? manage_workers.isra.25+0x1f0/0x1f0
[ 1731.465024]  [<ffffffff810731d3>] kthread+0x93/0xa0
[ 1731.465030]  [<ffffffff8146bae4>] kernel_thread_helper+0x4/0x10
[ 1731.465033]  [<ffffffff81073140>] ? kthread_freezable_should_stop+0x70/0x70
[ 1731.465036]  [<ffffffff8146bae0>] ? gs_change+0x13/0x13
[ 1731.465038] ---[ end trace b8312b8ee83d9dce ]---
[ 1731.475133] sd 0:0:0:0: [sda] Stopping disk
[ 1731.514500] ACPI handle has no context!
[ 1731.514518] ACPI handle has no context!
[ 1731.515708] [fglrx] IRQ 40 Disabled
[ 1731.515771] [fglrx] Preparing suspend fglrx in kernel.
[ 1731.593190] usb 1-2: reset high-speed USB device number 2 using ehci_hcd
[ 1731.683438] [fglrx] Suspending fglrx in kernel completed.
[ 1731.683447] [fglrx] Power down the ASIC .
[ 1731.826605] ACPI handle has no context!
[ 1732.425053] PM: suspend of devices complete after 981.470 msecs
[ 1732.425333] PM: late suspend of devices complete after 0.274 msecs
[ 1732.425702] ehci_hcd 0000:00:03.3: wake-up capability enabled by ACPI
[ 1732.436566] ohci_hcd 0000:00:03.1: wake-up capability enabled by ACPI
[ 1732.436594] ohci_hcd 0000:00:03.0: wake-up capability enabled by ACPI
[ 1732.436697] PM: noirq suspend of devices complete after 11.359 msecs
[ 1732.437037] ACPI: Preparing to enter system sleep state S3
[ 1732.454761] PM: Saving platform NVS memory
[ 1732.454769] Disabling non-boot CPUs ...
[ 1732.454804] Extended CMOS year: 2000
[ 1732.454804] ACPI: Low-level resume complete
[ 1732.454804] PM: Restoring platform NVS memory
[ 1732.454804] Extended CMOS year: 2000
[ 1732.454804] ACPI: Waking up from system sleep state S3
[ 1732.613392] ohci_hcd 0000:00:03.0: wake-up capability disabled by ACPI
[ 1732.613423] ohci_hcd 0000:00:03.1: wake-up capability disabled by ACPI
[ 1732.626560] ehci_hcd 0000:00:03.3: wake-up capability disabled by ACPI
[ 1732.627239] PM: noirq resume of devices complete after 14.026 msecs
[ 1732.627345] PM: early resume of devices complete after 0.081 msecs
[ 1732.627441] sis190 0000:00:04.0: setting latency timer to 64
[ 1732.627476] snd_hda_intel 0000:00:0f.0: setting latency timer to 64
[ 1732.630111] [fglrx] Power up the ASIC
[ 1732.630129] [fglrx] Preparing resume fglrx in kernel.
[ 1732.648259] [fglrx] Resuming fglrx in kernel completed.
[ 1732.648496] [fglrx] IRQ 40 Enabled
[ 1732.671241] Extended CMOS year: 2000
[ 1732.816739] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1732.816744] ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[ 1732.870070] ata2.00: configured for UDMA/100
[ 1732.913189] usb 1-2: reset high-speed USB device number 2 using ehci_hcd
[ 1733.196529] usb 2-2: reset full-speed USB device number 2 using ohci_hcd
[ 1734.196738] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1734.196742] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[ 1734.220174] ata1.00: configured for UDMA/133
[ 1734.220250] sd 0:0:0:0: [sda] Starting disk
[ 1734.230862] PM: resume of devices complete after 1603.510 msecs
[ 1734.491146] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht'
[ 1734.491408] ieee80211 phy5: hwaddr 1c:4b:d6:26:c3:30, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 1734.512874] rtl8187: Customer ID is 0x00
[ 1734.512911] Registered led device: rtl8187-phy5::radio
[ 1734.512936] Registered led device: rtl8187-phy5::tx
[ 1734.512961] Registered led device: rtl8187-phy5::rx
[ 1734.513613] rtl8187: wireless switch is on
[ 1734.513870] PM: Finishing wakeup.
[ 1734.513873] Restarting tasks ... done.
[ 1734.533531] video LNXVIDEO:00: Restoring backlight state
[ 1738.463129] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 1738.588531] EXT4-fs (sda4): re-mounted. Opts: commit=0

Plus intéressant le fichier /var/log/pm-suspend.log :

Code : Tout sélectionner

$ tail -f /var/log/pm-suspend.log 
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:

/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
mer. juin 20 11:03:25 CEST 2012: Finished.
Initial commandline parameters: 
mer. juin 20 11:13:17 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux arch 3.4.3-1-ARCH #1 SMP PREEMPT Mon Jun 18 08:28:29 CEST 2012 x86_64 GNU/Linux
Module                  Size  Used by
aes_x86_64              7508  1 
cryptd                  8741  0 
aes_generic            26138  1 aes_x86_64
fuse                   68768  2 
usbhid                 36430  0 
hid                    85285  1 usbhid
arc4                    1410  2 
rtl8187                52527  0 
eeprom_93cx6            2175  1 rtl8187
mac80211              395680  1 rtl8187
cfg80211              170074  2 mac80211,rtl8187
joydev                  9991  0 
snd_hda_codec_realtek    60377  1 
rfkill                 15604  1 cfg80211
fglrx                3198535  112 
uvcvideo               69437  0 
videobuf2_vmalloc       2468  1 uvcvideo
videobuf2_memops        2246  1 videobuf2_vmalloc
videobuf2_core         20415  1 uvcvideo
videodev               93086  1 uvcvideo
media                  10213  2 uvcvideo,videodev
amd_iommu_v2            7359  1 fglrx
snd_hda_intel          24053  0 
snd_hda_codec          94273  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6300  1 snd_hda_codec
snd_pcm                74958  2 snd_hda_codec,snd_hda_intel
snd_page_alloc          7217  2 snd_pcm,snd_hda_intel
snd_timer              18966  1 snd_pcm
snd                    58997  6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore               5410  1 snd
radeon                852002  0 
i2c_algo_bit            5391  1 radeon
drm_kms_helper         33051  1 radeon
sis190                 17362  0 
ttm                    64320  1 radeon
mii                     4123  1 sis190
microcode              12185  0 
drm                   208958  3 ttm,drm_kms_helper,radeon
sdhci_pci              10833  0 
sdhci                  23854  1 sdhci_pci
i2c_core               20369  5 drm,drm_kms_helper,i2c_algo_bit,radeon,videodev
mmc_core               82070  2 sdhci,sdhci_pci
sis_agp                 4189  0 
serio_raw               4653  0 
psmouse                70792  0 
pcspkr                  1899  0 
jmb38x_ms               8417  0 
memstick                7016  1 jmb38x_ms
battery                 6517  0 
ac                      2376  0 
processor              26567  1 
wmi                     8475  0 
coretemp                5654  0 
evdev                   9754  9 
video                  11307  0 
thermal                 7959  0 
button                  4502  1 fglrx
ext4                  424175  3 
crc16                   1359  1 ext4
jbd2                   73919  1 ext4
mbcache                 5977  1 ext4
sd_mod                 29239  5 
sr_mod                 14823  0 
cdrom                  35648  1 sr_mod
pata_acpi               3408  0 
sata_sis                3969  4 
pata_sis               10975  1 sata_sis
ata_generic             3295  0 
ohci_hcd               21720  0 
ehci_hcd               41154  0 
libata                167611  4 pata_acpi,sata_sis,pata_sis,ata_generic
scsi_mod              132942  3 libata,sd_mod,sr_mod
usbcore               147533  6 uvcvideo,rtl8187,ohci_hcd,ehci_hcd,usbhid
usb_common               954  1 usbcore
             total       used       free     shared    buffers     cached
Mem:       2053104    1237756     815348          0      36964     334776
-/+ buffers/cache:     866016    1187088
Swap:      2104508          0    2104508

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:

/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:

/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55wicd suspend suspend:

/usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:

/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
mer. juin 20 11:13:31 CEST 2012: performing suspend
(null): Error in configuration file, line 1
(null): Could not parse config file
switching from vt7 to vt1... succeeded
switching back to vt7... succeeded
mer. juin 20 11:13:39 CEST 2012: Awake.
mer. juin 20 11:13:39 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
Lecture données brutes '/dev/zero' : Unsigned 8 bit, Fréquence 8000 Hz, Mono

/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55wicd resume suspend:

/usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:

/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:

/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
mer. juin 20 11:13:43 CEST 2012: Finished.

Le seule erreur présente dans ce log semble être la suivante :

Code : Tout sélectionner

(null): Error in configuration file, line 1
(null): Could not parse config file

Donc l'erreur doit se trouver à la ligne 1 du fichier /usr/lib/pm-utils/sleep.d/99video mais je suis incapable de l'identifier (le fichier semble tout ce qu'il y a de normal). Je ne le copie pas ici parce qu'il est gros mais vous devez avoir le même.

Des idées ?
Merci d'avance

MrMen · Message par **MrMen** » jeu. 21 juin 2012, 09:03

Salut, tu pourrais juste donner le début du fichier pour voir si on a bien le même. (si l'erreur vient de là, on a surement pas le même…)

ppr · Message par **ppr** » jeu. 21 juin 2012, 19:43

Merci de ta réponse,

Voici le début du fichier /usr/lib/pm-utils/sleep.d/99video :

Code : Tout sélectionner

#!/bin/sh
#
# Copyright 2006-2007 Richard Hughes <richard@hughsie.com>
# Copyright 2007 Peter Jones <pjones@redhat.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of version 2 of the GNU General Public License as
# published by the Free Software Foundation.

# Handle video quirks.  If you are having suspend/resume issues,
# troubleshooting using this hook is probably the best place to start.
# If it weren't for video card quirks, suspend/resume on Linux would be 
# a whole lot more stable.

. "${PM_FUNCTIONS}"

for opt in $PM_CMDLINE; do
	case "${opt##--quirk-}" in # just quirks, please
		dpms-on) 	   QUIRK_DPMS_ON="true" ;;
		dpms-suspend) 	   QUIRK_DPMS_SUSPEND="true" ;;
		radeon-off) 	   QUIRK_RADEON_OFF="true" ;;
		reset-brightness)  QUIRK_RESET_BRIGHTNESS="true" ;;
		s3-bios) 	   QUIRK_S3_BIOS="true" ;;
		s3-mode) 	   QUIRK_S3_MODE="true" ;;
		vbe-post) 	   QUIRK_VBE_POST="true" ;;
		vbemode-restore)   QUIRK_VBEMODE_RESTORE="true" ;;
		vbestate-restore)  QUIRK_VBESTATE_RESTORE="true" ;;
		vga-mode-3) 	   QUIRK_VGA_MODE_3="true" ;;
		no-fb) 		   QUIRK_NOFB="true" ;;
		save-pci) 	   QUIRK_SAVE_PCI="true" ;;
	        no-chvt)           QUIRK_NO_CHVT="true" ;;
		none) 		   QUIRK_NONE="true" ;;
		*) continue ;;
	esac
done

reset_brightness()
{
	for bl in /sys/class/backlight/* ; do
		[ -f "$bl/brightness" ] || continue
		BR="$(cat $bl/brightness)"
		echo 0 > "$bl/brightness"
		echo "$BR" > "$bl/brightness"
	done
}

if command_exists vbetool; then
	vbe() { vbetool "$@"; }
else 
	vbe() { echo "vbetool not installed!" 1>&2; return 1; }
fi

if command_exists radeontool; then
	radeon() { radeontool "$@"; }
else 
	radeon() { echo "radeontool not found" 1>&2; return 1; }
fi

die_if_framebuffer() 
{ 
	[ -d "/sys/class/graphics/fb0" ] || return
	echo "--quirk-no-fb passed, but system is using a framebuffer."
	echo "Aborting."
	exit 1
}


save_fbcon()
{
	local con
	for con in /sys/class/graphics/*/state; do
		[ -f $con ] || continue
		echo 1 >"${con}"
	done
}
...........

MrMen · Message par **MrMen** » ven. 22 juin 2012, 10:58

Je confirme on a le même début. Par contre en farfouillant j'ai trouvé ce thread dans le forum en https://bbs.archlinux.org/viewtopic.php?pid=1116574, il est récent donc ça peut être pas mal de suivre ce qui s'y passe.

Sinon tu as des appareils branchés sur ta machine ? peut être qu'en la mettant nue, ça va passer. Je t'avoue qu'après j'ai pas beaucoup d'idée.

Message par **benjarobin** » ven. 22 juin 2012, 11:02

2 points:

Code : Tout sélectionner

mer. juin 20 11:13:31 CEST 2012: performing suspend
(null): Error in configuration file, line 1
(null): Could not parse config file

Ceci n'est en aucun cas lié à /usr/lib/pm-utils/sleep.d/99video.

Ton kernel affiche une belle erreur :

Code : Tout sélectionner

[ 1731.464845] Pid: 3246, comm: kworker/u:0 Tainted: P        W  O 3.4.3-1-ARCH #1
[ 1731.464848] Call Trace:
[ 1731.464857]  [<ffffffff810515cf>] warn_slowpath_common+0x7f/0xc0
...

ppr · Message par **ppr** » ven. 22 juin 2012, 12:16

@ Mr_Men C'est moi qui est posté le topic sur le forum anglais. Mais il n'a pas (encore) abouti à une solution, donc j'ai posté sur le forum fr.

@ benjarobin

Bon à savoir que ce n'est pas le fichier /usr/lib/pm-utils/sleep.d/99video qui est en cause. Je croyais bêtement que ce fichier était lié à l'erreur car il est cité juste avant.

Que pourrait vouloir dire l'erreur du kernel ? Est-il possible de la résoudre ?

Arch Linux

Archlinux.fr [Forums]

[veille] Mise en veille qui se réveille tout de suite

[veille] Mise en veille qui se réveille tout de suite

Re: [veille] Mise en veille qui se réveille tout de suite

Re: [veille] Mise en veille qui se réveille tout de suite

Re: [veille] Mise en veille qui se réveille tout de suite

Re: [veille] Mise en veille qui se réveille tout de suite

Re: [veille] Mise en veille qui se réveille tout de suite