[wifi] installation driver belkin (résolu)

oix02 · Message par **oix02** » mar. 03 mai 2011, 14:23

Bonjour,

J'ai installé une arch sur le pc de mon frère ! il avait une carte réseau qui deconnait à mort avec ndiswrapper (obligé de le relancer constament) et il n'existe pas de driver linux pour ce matos, il a chopé une blekin wireless mini (Bus 001 Device 004: ID 050d:1102 Belkin Components Realtek RTL8188CE-VAU 1T1R 802.11n WLAN Adapter)

je tente de lui installer le driver mais j'obtiens :

Code : Tout sélectionner

make: *** /lib/modules/2.6.38-ARCH/build: Aucun fichier ou dossier de ce type. Arrêt.
make: *** [modules] Erreur 2
Compile make driver error: 2, Please check error Mesg

voici le debut de la commande :

Code : Tout sélectionner

       Auto install for 8192cu
                September, 1 2010 v 1.0.0
rtl8192CU_linux_v2.0.1324.20110126/
rtl8192CU_linux_v2.0.1324.20110126/autoconf_rtl8192c_usb_linux.h
rtl8192CU_linux_v2.0.1324.20110126/clean
rtl8192CU_linux_v2.0.1324.20110126/core/
rtl8192CU_linux_v2.0.1324.20110126/core/efuse/
rtl8192CU_linux_v2.0.1324.20110126/core/efuse/rtl8712_efuse.c
rtl8192CU_linux_v2.0.1324.20110126/core/ieee80211.c
rtl8192CU_linux_v2.0.1324.20110126/core/led/
rtl8192CU_linux_v2.0.1324.20110126/core/led/rtl8192c_led.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_cmd.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_debug.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_eeprom.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_io.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_ioctl_query.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_ioctl_rtl.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_ioctl_set.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_mlme.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_mlme_ext.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_mp.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_mp_ioctl.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_pwrctrl.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_recv.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_rf.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_security.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_sta_mgt.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_wlan_util.c
rtl8192CU_linux_v2.0.1324.20110126/core/rtw_xmit.c
rtl8192CU_linux_v2.0.1324.20110126/hal/
rtl8192CU_linux_v2.0.1324.20110126/hal/hal_init.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/rtl8192c_dm.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/rtl8192c_phycfg.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/rtl8192c_rf6052.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/rtl8192c_rxdesc.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/Hal8192CUHWImg.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/rtl8192cu_recv.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/rtl8192cu_xmit.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/rtl8192c_cmd.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/usb_halinit.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/usb_ops_ce.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/usb_ops_linux.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c/usb/usb_ops_xp.c
rtl8192CU_linux_v2.0.1324.20110126/hal/rtl8192c_d_hal_init.c
rtl8192CU_linux_v2.0.1324.20110126/ifcfg-wlan0
rtl8192CU_linux_v2.0.1324.20110126/include/
rtl8192CU_linux_v2.0.1324.20110126/include/autoconf.h
rtl8192CU_linux_v2.0.1324.20110126/include/basic_types.h
rtl8192CU_linux_v2.0.1324.20110126/include/byteorder/
rtl8192CU_linux_v2.0.1324.20110126/include/byteorder/big_endian.h
rtl8192CU_linux_v2.0.1324.20110126/include/byteorder/generic.h
rtl8192CU_linux_v2.0.1324.20110126/include/byteorder/little_endian.h
rtl8192CU_linux_v2.0.1324.20110126/include/byteorder/swab.h
rtl8192CU_linux_v2.0.1324.20110126/include/byteorder/swabb.h
rtl8192CU_linux_v2.0.1324.20110126/include/circ_buf.h
rtl8192CU_linux_v2.0.1324.20110126/include/cmd_osdep.h
rtl8192CU_linux_v2.0.1324.20110126/include/drv_conf.h
rtl8192CU_linux_v2.0.1324.20110126/include/drv_types.h
rtl8192CU_linux_v2.0.1324.20110126/include/drv_types_ce.h
rtl8192CU_linux_v2.0.1324.20110126/include/drv_types_linux.h
rtl8192CU_linux_v2.0.1324.20110126/include/drv_types_xp.h
rtl8192CU_linux_v2.0.1324.20110126/include/ethernet.h
rtl8192CU_linux_v2.0.1324.20110126/include/farray.h
rtl8192CU_linux_v2.0.1324.20110126/include/h2clbk.h
rtl8192CU_linux_v2.0.1324.20110126/include/Hal8192CPhyCfg.h
rtl8192CU_linux_v2.0.1324.20110126/include/Hal8192CPhyReg.h
rtl8192CU_linux_v2.0.1324.20110126/include/Hal8192CUHWImg.h
rtl8192CU_linux_v2.0.1324.20110126/include/HalRf.h
rtl8192CU_linux_v2.0.1324.20110126/include/hal_init.h
rtl8192CU_linux_v2.0.1324.20110126/include/ieee80211.h
rtl8192CU_linux_v2.0.1324.20110126/include/ieee80211_ext.h
rtl8192CU_linux_v2.0.1324.20110126/include/if_ether.h
rtl8192CU_linux_v2.0.1324.20110126/include/ip.h
rtl8192CU_linux_v2.0.1324.20110126/include/mlme_osdep.h
rtl8192CU_linux_v2.0.1324.20110126/include/mp_custom_oid.h
rtl8192CU_linux_v2.0.1324.20110126/include/nic_spec.h
rtl8192CU_linux_v2.0.1324.20110126/include/osdep_ce_service.h
rtl8192CU_linux_v2.0.1324.20110126/include/osdep_intf.h
rtl8192CU_linux_v2.0.1324.20110126/include/osdep_service.h
rtl8192CU_linux_v2.0.1324.20110126/include/recv_osdep.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8192c_cmd.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8192c_dm.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8192c_event.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8192c_hal.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8192c_recv.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8192c_spec.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8192c_xmit.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_bitdef.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_cmd.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_efuse.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_event.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_hal.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_recv.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_regdef.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_rf.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_spec.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtl8712_xmit.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_byteorder.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_cmd.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_debug.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_eeprom.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_event.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_ht.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_io.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_ioctl.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_ioctl_query.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_ioctl_rtl.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_ioctl_set.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_led.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_mlme.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_mlme_ext.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_mp.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_mp_ioctl.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_mp_phy_regdef.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_pwrctrl.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_qos.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_recv.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_rf.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_security.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_version.h
rtl8192CU_linux_v2.0.1324.20110126/include/rtw_xmit.h
rtl8192CU_linux_v2.0.1324.20110126/include/sdio_hal.h
rtl8192CU_linux_v2.0.1324.20110126/include/sdio_ops.h
rtl8192CU_linux_v2.0.1324.20110126/include/sdio_ops_ce.h
rtl8192CU_linux_v2.0.1324.20110126/include/sdio_ops_linux.h
rtl8192CU_linux_v2.0.1324.20110126/include/sdio_ops_xp.h
rtl8192CU_linux_v2.0.1324.20110126/include/sdio_osintf.h
rtl8192CU_linux_v2.0.1324.20110126/include/sta_info.h
rtl8192CU_linux_v2.0.1324.20110126/include/usb_hal.h
rtl8192CU_linux_v2.0.1324.20110126/include/usb_ops.h
rtl8192CU_linux_v2.0.1324.20110126/include/usb_osintf.h
rtl8192CU_linux_v2.0.1324.20110126/include/usb_vendor_req.h
rtl8192CU_linux_v2.0.1324.20110126/include/version.h
rtl8192CU_linux_v2.0.1324.20110126/include/wifi.h
rtl8192CU_linux_v2.0.1324.20110126/include/wlan_bssdef.h
rtl8192CU_linux_v2.0.1324.20110126/include/xmit_osdep.h
rtl8192CU_linux_v2.0.1324.20110126/Kconfig
rtl8192CU_linux_v2.0.1324.20110126/Makefile
rtl8192CU_linux_v2.0.1324.20110126/os_dep/
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/ioctl_linux.c
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/mlme_linux.c
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/os_intfs.c
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/recv_linux.c
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/sdio_intf.c
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/usb_intf.c
rtl8192CU_linux_v2.0.1324.20110126/os_dep/linux/xmit_linux.c
rtl8192CU_linux_v2.0.1324.20110126/os_dep/osdep_service.c
rtl8192CU_linux_v2.0.1324.20110126/runwpa
rtl8192CU_linux_v2.0.1324.20110126/wlan0dhcp
rtl8192CU_linux_v2.0.1324.20110126/wpa1.conf
rtl8192CU_linux_v2.0.1324.20110126
Authentication requested [root] for make driver:
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38-ARCH/build M=/home/rfid/doc/rtl8192CU_linux_v2.0.1324.20110126/RTL8192CU_8188CUS_8188CE-VAU_linux_v2.0.1324.20110126/driver/rtl8192CU_linux_v2.0.1324.20110126  modules

edit concernant sa carte wifi interne comemnt je peux savoir quel module sont precharger pour etre sur qu'un ne tente pas de géré la clé en plus de ndiswrapper ? J'ai l'impression qu'il pourrait s'agir d'un conflit mais bon..

Message par **FoolEcho** » mar. 03 mai 2011, 14:43

kernel26-headers pour compiler.

oix02 a écrit :edit concernant sa carte wifi interne comemnt je peux savoir quel module sont precharger pour etre sur qu'un ne tente pas de géré la clé en plus de ndiswrapper ? J'ai l'impression qu'il pourrait s'agir d'un conflit mais bon..

hwinfo --netcard (à installer)
ou
lspci -vv

J'ai pas vérifié plus que ça, mais rtl8192ce (Aur) devrait aller.

oix02 · Message par **oix02** » mar. 03 mai 2011, 17:51

Salut après l'avoir installé je lance :

modprobe rtl8192ce

mais toujours aucun réseaux détéctés (j'ai desactivé l'autre carte)

pourtant la compilation s'est bien passé..

Message par **FoolEcho** » mar. 03 mai 2011, 18:15

Sorties de

Code : Tout sélectionner

hwinfo --netcard #ou lspci -vv pour ta carte réseau, mais hwinfo faisant le tri, je préfère ;)
ifconfig -a
iwconfig

?

oix02 · Message par **oix02** » mar. 03 mai 2011, 18:47

Code : Tout sélectionner

 hwinfo --netcard
25: PCI 601.0: 0200 Ethernet controller                         
  [Created at pci.318]
  Unique ID: rBUF.8iWEuRrpdnB
  Parent ID: qscc.hV5J61pTkh5
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:06:01.0
  SysFS BusID: 0000:06:01.0
  Hardware Class: network
  Model: "Realtek RTL-8139/8139C/8139C+"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8139 "RTL-8139/8139C/8139C+"
  SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
  SubDevice: pci 0x009f 
  Revision: 0x10
  Driver: "8139too"
  Driver Modules: "8139too"
  Device File: eth0
  I/O Ports: 0xa000-0xafff (rw)
  Memory Range: 0xf0300000-0xf03000ff (rw,non-prefetchable)
  IRQ: 21 (no events)
  HW Address: 00:1b:38:cc:29:55
  Link detected: no
  Module Alias: "pci:v000010ECd00008139sv00001025sd0000009Fbc02sc00i00"
  Driver Info #0:
    Driver Status: 8139too is active
    Driver Activation Cmd: "modprobe 8139too"
  Driver Info #1:
    Driver Status: 8139cp is active
    Driver Activation Cmd: "modprobe 8139cp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

26: PCI 602.0: 0282 WLAN controller
  [Created at pci.318]
  Unique ID: y9sn.ZCwjp0vwIc2
  Parent ID: qscc.hV5J61pTkh5
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:06:02.0
  SysFS BusID: 0000:06:02.0
  Hardware Class: network
  Model: "Linksys, A Division of Cisco [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)"
  Vendor: pci 0x17fe "Linksys, A Division of Cisco Systems"                                                                                                                         
  Device: pci 0x2220 "[AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)"                                                                                                   
  SubVendor: pci 0x1468 "AMBIT Microsystem Corp."                                                                                                                                   
  SubDevice: pci 0x0305                                                                                                                                                             
  Driver: "ndiswrapper"                                                                                                                                                             
  Driver Modules: "ndiswrapper", "ndiswrapper"
  Device File: wlan0
  Features: WLAN
  I/O Ports: 0xa400-0xa41f (rw)
  Memory Range: 0xf0300400-0xf030041f (rw,non-prefetchable)
  Memory Range: 0xf0300800-0xf0300fff (rw,non-prefetchable)
  IRQ: 22 (230503 events)
  HW Address: 00:0e:9b:8f:c3:ee
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
  WLAN bitrates: 1 2 5.5 11 6 9 12 18
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v000017FEd00002220sv00001468sd00000305bc02sc00i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

Code : Tout sélectionner

ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:1B:38:CC:29:55  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:21 Base address:0x4000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:66 errors:0 dropped:0 overruns:0 frame:0
          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3380 (3.3 Kb)  TX bytes:3380 (3.3 Kb)

wlan0     Link encap:Ethernet  HWaddr 00:0E:9B:8F:C3:EE  
          inet addr:10.6.163.250  Bcast:10.6.255.255  Mask:255.255.0.0
          inet6 addr: fe80::20e:9bff:fe8f:c3ee/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4559 errors:0 dropped:6 overruns:0 frame:0
          TX packets:4174 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:4533021 (4.3 Mb)  TX bytes:544730 (531.9 Kb)
          Interrupt:22 Memory:f0300800-f0301000

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11g ESSID:"REAUMUR2"
Mode:Managed Frequency:2.472 GHz Access Point: 00:15:2C:4A:49:10
Bit Rate=54 Mb/s
RTS thr=2347 B Fragment thr=2346 B
Power Management:off
Link Quality:79/100 Signal level:-45 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

La j'suis connecté avec la carte d'origine puisque l'autre ne fonctionne pas

Message par **FoolEcho** » mar. 03 mai 2011, 19:01

C'est très bien, tu te connectes avec ce que tu veux, mais ce qui nous intéresse ce sont les sorties des commandes avec la carte qui ne fonctionne pas...

oix02 · Message par **oix02** » mer. 11 mai 2011, 22:55

Salut, dsl j'étais en examen, lorsque j'ai lancé les commandes postée la clé belkin était branché je disais ça juste pour les infos de connexion. Je repost quand même les commandes avec la clé littigieuse belkin connecté et le module ndiswrapper (gérant l'autre carte dechargé) :

Celle ci rien ne mentionne la clé belkin fin je crois pourtant lsusb me la trouve bien :

hwinfo --netcard
25: PCI 601.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.8iWEuRrpdnB
Parent ID: qscc.hV5J61pTkh5
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:06:01.0
SysFS BusID: 0000:06:01.0
Hardware Class: network
Model: "Realtek RTL-8139/8139C/8139C+"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8139 "RTL-8139/8139C/8139C+"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x009f
Revision: 0x10
Driver: "8139too"
Driver Modules: "8139too"
Device File: eth0
I/O Ports: 0xa000-0xafff (rw)
Memory Range: 0xf0300000-0xf03000ff (rw,non-prefetchable)
IRQ: 21 (no events)
HW Address: 00:1b:38:cc:29:55
Link detected: no
Module Alias: "pci:v000010ECd00008139sv00001025sd0000009Fbc02sc00i00"
Driver Info #0:
Driver Status: 8139too is active
Driver Activation Cmd: "modprobe 8139too"
Driver Info #1:
Driver Status: 8139cp is active
Driver Activation Cmd: "modprobe 8139cp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #19 (PCI bridge)

26: PCI 602.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: 2i_g.XlcQtBjs88F
Parent ID: qscc.hV5J61pTkh5
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:06:02.0
SysFS BusID: 0000:06:02.0
Hardware Class: network
Model: "Linksys, A Division of Cisco [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)"
Vendor: pci 0x17fe "Linksys, A Division of Cisco Systems"
Device: pci 0x2220 "[AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)"
SubVendor: pci 0x1468 "AMBIT Microsystem Corp."
SubDevice: pci 0x0305
I/O Ports: 0xa400-0xa41f (rw)
Memory Range: 0xf0300400-0xf030041f (rw,non-prefetchable)
Memory Range: 0xf0300800-0xf0300fff (rw,non-prefetchable)
IRQ: 9 (255 events)
Module Alias: "pci:v000017FEd00002220sv00001468sd00000305bc02sc00i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #19 (PCI bridge)
[art@rfid ~]$ LSUSB
bash: LSUSB : commande introuvable
[art@rfid ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam
Bus 001 Device 003: ID 050d:1102 Belkin Components Realtek RTL8188CE-VAU 1T1R 802.11n WLAN Adapter
Bus 001 Device 006: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270 HSDPA/HSUPA Modem

ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1B:38:CC:29:55
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:21 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

ppp0 Link encap:Point-to-Point Protocol
inet addr:10.34.112.140 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:10598 errors:0 dropped:0 overruns:0 frame:0
TX packets:11396 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:8937053 (8.5 Mb) TX bytes:1629635 (1.5 Mb)

ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1B:38:CC:29:55
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:21 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

ppp0 Link encap:Point-to-Point Protocol
inet addr:10.34.112.140 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:10663 errors:0 dropped:0 overruns:0 frame:0
TX packets:11447 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:9001854 (8.5 Mb) TX bytes:1635234 (1.5 Mb)

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ppp0 no wireless extensions.

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam
Bus 001 Device 003: ID 050d:1102 Belkin Components Realtek RTL8188CE-VAU 1T1R 802.11n WLAN Adapter
Bus 001 Device 006: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270 HSDPA/HSUPA Modem

edit la compilation s'est bien passée d'après toi ?

rtl8192ce 2.6.0005.1116.2010-2
( Paquet non supporté : peut être dangereux ! )
==> Éditer PKGBUILD ? [O/n] ("A" pour annuler)
==> ------------------------------------------
==> n

==> Dépendances de rtl8192ce :
- kernel26-headers (déjà installé)

==> Éditer rtl8192ce.install ? [O/n] ("A" pour annuler)
==> ---------------------------------------------------
==> n

==> Lancer la compilation de rtl8192ce ? [O/n]
==> ------------------------------------------
==>
==> Construction et installation du paquet
==> Création du paquet rtl8192ce 2.6.0005.1116.2010-2 (mer. mai 11 23:06:07 CEST 2011)
==> Vérification des dépendances pour l'exécution...
==> Vérification des dépendances pour la compilation...
==> Récupération des sources...
-> Téléchargement de rtl8192ce_linux_2.6.0005.1116.2010.tar.gz...
--2011-05-11 23:06:07-- http://jecxjo.sdf.org/aur/rtl8192ce_lin ... 010.tar.gz
Résolution de jecxjo.sdf.org... 192.94.73.4
Connexion vers jecxjo.sdf.org|192.94.73.4|:80...connecté.
requête HTTP transmise, en attente de la réponse...200 OK
Longueur: 1797161 (1,7M) [application/x-tar]
Sauvegarde en : «rtl8192ce_linux_2.6.0005.1116.2010.tar.gz.part»

100%[==================================================================================================================>] 1 797 161 44,8K/s ds 42s

2011-05-11 23:06:53 (41,4 KB/s) - «rtl8192ce_linux_2.6.0005.1116.2010.tar.gz.part» sauvegardé [1797161/1797161]

==> Validation des fichiers sources avec md5sums...
rtl8192ce_linux_2.6.0005.1116.2010.tar.gz ... Réussite
==> Extraction des sources...
-> Extraction de rtl8192ce_linux_2.6.0005.1116.2010.tar.gz avec bsdtar
==> Entre dans l'environnement fakeroot...
==> Lancement de build()...
make[1]: entrant dans le répertoire « /usr/src/linux-2.6.38-ARCH »
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_core.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_core.c: In function ‘rtl8192_tx’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_core.c:3994:29: attention : variable ‘broad_addr’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_core.c:3993:23: attention : variable ‘stype’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_eeprom.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_wx.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_cam.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_pm.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_pci.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_ps.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_ps.c: In function ‘PlatformSwitchClkReq’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_ps.c:691:5: attention : variable ‘Buffer’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_debug.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_ethtool.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl_regd.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c: In function ‘rtl8192ce_get_eeprom_size’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c:1779:5: attention : variable ‘size’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c: In function ‘rtl8192ce_HwConfigure’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c:1809:6: attention : variable ‘regRATR’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c: In function ‘rtl8192ce_UpdateHalRATRTable’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c:3049:3: attention : case value ‘6’ not in enumerated type ‘WIRELESS_MODE’ [-Wswitch]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c: In function ‘ActUpdateChannelAccessSetting’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dev.c:4393:2: attention : case value ‘6’ not in enumerated type ‘WIRELESS_MODE’ [-Wswitch]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_tx.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_tx.c: In function ‘rtl8192ce_tx_fill_desc’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_tx.c:189:13: attention : variable ‘stype’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_rx.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_Efuse.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_Efuse.c: In function ‘efuse_PgPacketWrite’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_Efuse.c:1341:43: attention : variable ‘bResult’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_Efuse.c: In function ‘efuse_GetCurrentSize’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_Efuse.c:1823:5: attention : variable ‘hoffset’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c: In function ‘PHY_MACConfig8192C’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c:683:7: attention : variable ‘pszMACRegFile’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c: In function ‘PHY_ConfigRFWithHeaderFile’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c:1949:12: attention : variable ‘rtStatus’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c: In function ‘phy_SetRFPowerState8192CE’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c:2348:25: attention : comparison between ‘RT_STATUS’ and ‘enum <anonymous>’ [-Wenum-compare]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c:2349:7: attention : comparison between ‘RT_STATUS’ and ‘enum <anonymous>’ [-Wenum-compare]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c: In function ‘FillA2Entry8192C’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_phy.c:5180:9: attention : variable ‘A2entry_index’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_firmware.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_firmware.c: In function ‘FirmwareDownload92C’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_firmware.c:227:9: attention : variable ‘pFwImageFileName’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmbt.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmbt.c: In function ‘BT_BTStateChange’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmbt.c:29:13: attention : variable ‘ServiceTypeCnt’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmbt.c: In function ‘dm_BTCoexist’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmbt.c:307:7: attention : variable ‘BT_gpio_mux’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dmout.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_dm.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_rtl6052.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_hwimg.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_led.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/rtl8192c/r8192C_com.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.c: In function ‘rtllib_rx_InfraAdhoc’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_rx.c:2282:59: attention : variable ‘payload’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac.c: In function ‘softmac_ps_mgmt_xmit’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac.c:391:14: attention : variable ‘stype’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_tx.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_tx.c: In function ‘rtllib_txrate_selectmode’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_tx.c:694:12: attention : variable ‘max_aid’ set but not used [-Wunused-but-set-variable]
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_tx.c: In function ‘rtllib_xmit_inter’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_tx.c:1123:11: attention : variable ‘tcb_desc_skb’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_wx.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_module.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac_wx.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac_wx.c: In function ‘rtllib_wx_sync_scan_wq’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_softmac_wx.c:394:13: attention : variable ‘count’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_HTProc.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_TSProc.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_BAProc.o
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_BAProc.c: In function ‘rtllib_rx_DELBA’:
/tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtl819x_BAProc.c:591:9: attention : variable ‘pReasonCode’ set but not used [-Wunused-but-set-variable]
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/dot11d.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_tkip.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_ccmp.o
CC [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_wep.o
LD [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.mod.o
LD [M] /tmp/yaourt-tmp-art/aur-rtl8192ce/src/rtl8192ce_linux_2.6.0005.1116.2010/HAL/rtl8192/r8192ce_pci.ko
make[1]: quittant le répertoire « /usr/src/linux-2.6.38-ARCH »
==> Nettoyage de l'installation...
-> Suppression d'autres fichiers...
-> Compression des man/info pages...
-> Strip des symboles de débogage inutiles dans les binaires et les bibliothèques...
==> Création du paquet...
-> Génération du fichier .PKGINFO...
-> Ajout du fichier install...
-> Compression du paquet...
==> Quitte l'environnement fakeroot.
==> Création finie: rtl8192ce 2.6.0005.1116.2010-2 (mer. mai 11 23:07:40 CEST 2011)

==> Installer rtl8192ce ? [O/n]
==> [A]fficher le contenu du paquet [V]érifier avec namcap
==> ------------------------------------------------------
==> o

Mot de passe :
Avertissement: rtl8192ce-2.6.0005.1116.2010-2 est à jour -- réinstalle
Résolution des dépendances...
Recherche des conflits possibles entre paquets...

Cibles (1): rtl8192ce-2.6.0005.1116.2010-2

Taille totale des paquets (téléchargement): 0,00 Mo
Taille totale des paquets (installation): 1,75 Mo

Procéder à l'installation ? [O/n] o
(1/1) vérification de l'intégrité des paquets [#######################################################] 100%
(1/1) Analyse des conflits entre fichiers [#######################################################] 100%
(1/1) Mise à jour de rtl8192ce [#######################################################] 100%
updating kernel modules...
======================================================================
New Kernel Module Installed: r8192ce_pci.
Depending on your system setup you may need to load the module
manually, for example:

sudo modprobe r8192ce_pci

Documentation and scripts provided with the source are located at

/usr/share/rtl8192ce
======================================================================

Message par **FoolEcho** » jeu. 12 mai 2011, 09:50

(ah tiens, je pensais que hwinfo la montrerait...

... il faudrait voir avec --network ou --usb)
Bref.

oix02 a écrit :edit la compilation s'est bien passée d'après toi ?

Ma foi, on dirait bien.

Essaie:

Code : Tout sélectionner

modprobe -v r8192ce_pci
ifconfig -a

oix02 · Message par **oix02** » sam. 14 mai 2011, 00:09

Salut,

modprobe -v r8192ce_pci
insmod /lib/modules/2.6.38-ARCH/kernel/drivers/net/wireless/r8192ce_pci.ko

Si je relance la même plus de retour mais pas mieux niveau fonctionnement de la clé..

ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1B:38:CC:29:55
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:21 Base address:0xa000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

ppp0 Link encap:Point-to-Point Protocol
inet addr:10.218.36.97 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:8207 (8.0 Kb) TX bytes:1062 (1.0 Kb)

par contre hwinfo --usb trouve la clé :

12: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: X7GA.8RWwmEal1sC
Parent ID: k4bc.3f5c44ENLJ9
SysFS ID: /devices/pci0000:00/0000:00:13.2/usb1/1-7/1-7:1.0
SysFS BusID: 1-7:1.0
Hardware Class: unknown
Model: "Belkin 802.11n WLAN Adapter"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x1102 "802.11n WLAN Adapter"
Revision: "2.00"
Serial ID: "00e04c000001"
Speed: 480 Mbps
Module Alias: "usb:v050Dp1102d0200dc00dsc00dp00icFFiscFFipFF"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)

Message par **FoolEcho** » sam. 14 mai 2011, 09:31

Il ne doit pas s'agir du bon pilote vu que hwinfo et ifconfig ne montrent rien de neuf (j'comprendrais décidément rien à comment ils les organisent chez realtek), il faudrait essayer avec celui que tu as voulu compiler dès le début, le rtl8192CU (le mieux serait de faire un PKGBUILD en s'inspirant de ceux déjà présent sur Aur car il ne s'agirait pas de casser le système)

EDIT: ceci dit le pilote a l'air inclu dans linux-firmware maintenant (il y a un rtl8192cufw.bin ; j'aurais du commencer par ça, mais les realtek sont bizarres parfois

). Essaie d'installer linux-firmware (je pense que tu ne l'avais pas), et regarde s'il y a du mieux au niveau lsmod/ifconfig -a/hwinfo.

oix02 · Message par **oix02** » dim. 15 mai 2011, 01:01

Bon à ce stade je me contente d'executer hein

J'suis bien content de tester linux-firmware sans "faire un PKGBUILD en s'inspirant de ceux dÃ©jÃ prÃ©sent sur Aur" parceque la sa depasse mes competences !

lsmod y'a un passage interessant (je suppose) :

mac80211 181766 2 rtl8192ce,rtlwifi
cfg80211 123549 2 rtlwifi,mac80211
rfkill 11894 1 cfg80211

hwinfo me trouve ça :

62: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: X7GA.8RWwmEal1sC
Parent ID: k4bc.3f5c44ENLJ9
SysFS ID: /devices/pci0000:00/0000:00:13.2/usb1/1-7/1-7:1.0
SysFS BusID: 1-7:1.0
Hardware Class: unknown
Model: "Belkin 802.11n WLAN Adapter"
Hotplug: USB
Vendor: usb 0x050d "Belkin Components"
Device: usb 0x1102 "802.11n WLAN Adapter"
Revision: "2.00"
Serial ID: "00e04c000001"
Speed: 480 Mbps
Module Alias: "usb:v050Dp1102d0200dc00dsc00dp00icFFiscFFipFF"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #53 (Hub)

ifconfig rien de neuf j'crois :

ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1B:38:CC:29:55
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:21 Base address:0xc000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0

Message par **FoolEcho** » dim. 15 mai 2011, 09:21

Bon, le noyau a l'air de charger rtlwifi de son chef, ça paraît bon... et pourtant hwinfo ne donne toujours pas d'info sur le pilote (et j'aime pô le "Hardware Class: unknown" ), c'est pareil avec lspci -vv (concernant le driver) ? ... et donc toujours rien dans ifconfig...

Il faudrait désinstaller rtl8192ce, bien mettre à jour et redémarrer (kernel26 2.6.38.6-2 et linux-firmware 20110512-2 ... je veux être sûr dans la mesure où il y a eu au moins un pépin avec les versions -1)

Tu pourrais ensuite nous communiquer les résultats de:

Code : Tout sélectionner

lsmod
grep -i rtlwifi /var/log/everything.log #filtre pour nous montrer seulement les données pour aujourd'hui

oix02 · Message par **oix02** » dim. 15 mai 2011, 23:15

c'est pareil avec lspci -vv (concernant le driver) ?

euh j'vois rien concernant la clé ou le driver avec cette commande

$lspci -w
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel modules: ati-agp

00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device 009f
Kernel modules: shpchp

00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 44000000-441fffff
Prefetchable memory behind bridge: 0000000044200000-00000000443fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5950
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: pcieport
Kernel modules: shpchp

00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 44400000-445fffff
Prefetchable memory behind bridge: 0000000044600000-00000000447fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5950
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: pcieport
Kernel modules: shpchp

00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ATI Technologies Inc IXP SB400 Serial ATA Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8440
Region 1: I/O ports at 8434
Region 2: I/O ports at 8438
Region 3: I/O ports at 8430
Region 4: I/O ports at 8400
Region 5: Memory at f0407000 (32-bit, non-prefetchable)
[virtual] Expansion ROM at 44800000 [disabled]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: sata_sil
Kernel modules: sata_sil

00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0404000 (32-bit, non-prefetchable)
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0405000 (32-bit, non-prefetchable)
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0406000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8410 [size=16]
Region 1: Memory at 44880000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4

00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) (prog-if 82 [Master PriP])
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, atiixp

00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f0300000-f03fffff
Prefetchable memory behind bridge: 40000000-43ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8 IsocEn- LSEn+ ExtCTL- 64b+
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 800MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at f0200000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f0220000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: radeon
Kernel modules: radeonfb, radeon

06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

06:02.0 Ethernet controller: InProComm Inc. IPN 2220 802.11g
Subsystem: AMBIT Microsystem Corp. Device 0305
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (8000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at a400 [size=32]
Region 1: Memory at f0300400 (32-bit, non-prefetchable) [size=32]
Region 2: Memory at f0300800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f0301000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: 40000000-43fff000 (prefetchable)
Memory window 1: 48000000-4bfff000
I/O window 0: 0000a800-0000a8ff
I/O window 1: 0000ac00-0000acff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f0302000 (32-bit, non-prefetchable) [size=128]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 18000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at f0302400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f0302800 (32-bit, non-prefetchable) [size=128]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Device 009f
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at f0300100 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

Une fois avoir fait les manipes :

lsmod
Module Size Used by
fuse 56745 3
ppp_deflate 3302 0
zlib_deflate 17878 1 ppp_deflate
bsd_comp 4583 0
ppp_async 5822 1
crc_ccitt 1095 1 ppp_async
ppp_generic 19105 7 ppp_deflate,bsd_comp,ppp_async
slhc 4197 1 ppp_generic
ipv6 241775 14
sr_mod 12668 0
cdrom 30893 1 sr_mod
option 13234 1
usb_wwan 7510 1 option
usbserial 26063 5 option,usb_wwan
uas 6344 0
uvcvideo 54060 0
snd_seq_dummy 1095 0
usb_storage 34191 0
snd_seq_oss 24256 0
videodev 56207 1 uvcvideo
snd_seq_midi_event 4416 1 snd_seq_oss
snd_seq 40160 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4220 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33120 0
snd_mixer_oss 12487 1 snd_pcm_oss
snd_hda_codec_realtek 223647 1
snd_hda_intel 18909 2
snd_hda_codec 63981 2 snd_hda_codec_realtek,snd_hda_intel
radeon 861023 2
snd_hwdep 4719 1 snd_hda_codec
joydev 7343 0
snd_pcm 58607 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 15182 2 snd_seq,snd_pcm
snd 42019 15 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
pcmcia 30510 0
ohci_hcd 19364 0
soundcore 4858 1 snd
ttm 43957 1 radeon
snd_page_alloc 5805 2 snd_hda_intel,snd_pcm
ehci_hcd 34949 0
8139cp 15851 0
shpchp 22177 0
serio_raw 3358 0
sdhci_pci 6718 0
sdhci 14805 1 sdhci_pci
yenta_socket 18422 0
8139too 17024 0
mmc_core 56683 1 sdhci
usbcore 113751 9 option,usb_wwan,usbserial,uas,uvcvideo,usb_storage,ohci_hcd,ehci_hcd
pci_hotplug 21458 1 shpchp
pcmcia_rsrc 8616 1 yenta_socket
psmouse 54703 0
wmi 7071 0
pcmcia_core 9762 3 pcmcia,yenta_socket,pcmcia_rsrc
mii 3246 2 8139cp,8139too
rtl8192ce 108161 0
k8temp 2583 0
pcspkr 1375 0
processor 21396 0
ati_agp 4449 0
rtlwifi 66377 1 rtl8192ce
container 1897 0
battery 8609 0
ac 2441 0
thermal 6403 0
sg 20662 0
i2c_piix4 7084 0
evdev 7086 8
mac80211 181766 2 rtl8192ce,rtlwifi
cfg80211 123549 2 rtlwifi,mac80211
rfkill 11894 1 cfg80211
loop 13767 0
ext4 304408 2
mbcache 4185 1 ext4
jbd2 58650 1 ext4
crc16 1069 1 ext4
sd_mod 24780 4
sata_sil 6232 3
pata_acpi 2292 0
pata_atiixp 2856 0
libata 150345 3 sata_sil,pata_acpi,pata_atiixp
scsi_mod 105492 6 sr_mod,uas,usb_storage,sg,sd_mod,libata
drm_kms_helper 23644 1 radeon
drm 141490 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 4263 1 radeon
button 3858 0
i2c_core 15688 6 videodev,radeon,i2c_piix4,drm_kms_helper,drm,i2c_algo_bit
video 9652 0
intel_agp 8496 0
intel_gtt 11097 1 intel_agp
agpgart 21456 5 ttm,ati_agp,drm,intel_agp,intel_gtt

par contre pour le retour de grep -i rtlwifi /var/log/everything.log j'ai un léger (sans mauvais jeu de mot !) soucis : même limitté à aujourd'hui le fichier fait casiement 15 mégas je l'aurais bien mis sur mon ftp, mais problème j'utilise pour me connecter une clé 3G limitté à 300 Mo/mois (le tethering a ses limittes !) : je viens de demenager je n'ai pas encore d'adsl hors j'ai deja consomé beaucoup, et j'aimerais tenir jusqu'à la fin du mois au cas ou l'activation de la ligne traine. Donc je l'uploaderai demain depuis le réseau de la fac pour conserver mes precieux Mo.

Message par **FoolEcho** » lun. 16 mai 2011, 07:34

Oui, bien sûr, où avais-je la tête ? Ce n'est pas lspci mais lsusb pour la clef... par contre, je ne sais plus si -v montre les modules... laisse tomber, utilise hwinfo et contrôle la partie pilote (mais bon, à priori ça ne marchait pas ).

Pour lsmod, un petit tri serait le bienvenu pour mieux se repèrer:

Code : Tout sélectionner

lsmod|sort

Pour la sortie du grep, montre-nous seulement les lignes relatives à ton dernier démarrage (il y a les dates normalement), les derniers lignes du fichier (tu peux filtrer les 15 dernières lignes en rajoutant à la fin du grep, par exemple):

Code : Tout sélectionner

grep -i rtlwifi /var/log/everything.log|tail -n 15

Prends ton temps, de toutes façons, il y a toujours du monde ici... normalement.

oix02 · Message par **oix02** » lun. 16 mai 2011, 11:48

Salut,

lsmod|sort
8139cp 15851 0
8139too 17024 0
ac 2441 0
agpgart 21456 5 ati_agp,ttm,drm,intel_agp,intel_gtt
ati_agp 4449 0
battery 8609 0
bsd_comp 4583 0
button 3858 0
cdrom 30893 1 sr_mod
cfg80211 123549 2 rtlwifi,mac80211
container 1897 0
crc16 1069 1 ext4
crc_ccitt 1095 1 ppp_async
drm 141490 3 radeon,ttm,drm_kms_helper
drm_kms_helper 23644 1 radeon
ehci_hcd 34949 0
evdev 7086 8
ext4 304408 2
fuse 56745 3
i2c_algo_bit 4263 1 radeon
i2c_core 15688 6 videodev,i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit
i2c_piix4 7084 0
intel_agp 8496 0
intel_gtt 11097 1 intel_agp
ipv6 241775 14
jbd2 58650 1 ext4
joydev 7343 0
k8temp 2583 0
libata 150345 3 pata_atiixp,sata_sil,pata_acpi
loop 13767 0
mac80211 181766 2 rtl8192ce,rtlwifi
mbcache 4185 1 ext4
mii 3246 2 8139cp,8139too
mmc_core 56683 1 sdhci
Module Size Used by
ndiswrapper 170668 0
ohci_hcd 19364 0
option 13234 2
pata_acpi 2292 0
pata_atiixp 2856 0
pci_hotplug 21458 1 shpchp
pcmcia 30510 0
pcmcia_core 9762 3 pcmcia,yenta_socket,pcmcia_rsrc
pcmcia_rsrc 8616 1 yenta_socket
pcspkr 1375 0
ppp_async 5822 1
ppp_deflate 3302 0
ppp_generic 19105 7 ppp_deflate,bsd_comp,ppp_async
processor 21396 0
psmouse 54703 0
radeon 861023 2
rfkill 11894 1 cfg80211
rtl8192ce 108161 0
rtlwifi 66377 1 rtl8192ce
sata_sil 6232 3
scsi_mod 105492 6 sr_mod,uas,usb_storage,sg,sd_mod,libata
sdhci 14805 1 sdhci_pci
sdhci_pci 6718 0
sd_mod 24780 4
serio_raw 3358 0
sg 20662 0
shpchp 22177 0
slhc 4197 1 ppp_generic
snd 42019 15 snd_seq_oss,snd_seq,snd_hda_codec_realtek,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_hda_codec 63981 2 snd_hda_codec_realtek,snd_hda_intel
snd_hda_codec_realtek 223647 1
snd_hda_intel 18909 2
snd_hwdep 4719 1 snd_hda_codec
snd_mixer_oss 12487 1 snd_pcm_oss
snd_page_alloc 5805 2 snd_hda_intel,snd_pcm
snd_pcm 58607 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_pcm_oss 33120 0
snd_seq 40160 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4220 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_seq_dummy 1095 0
snd_seq_midi_event 4416 1 snd_seq_oss
snd_seq_oss 24256 0
snd_timer 15182 2 snd_seq,snd_pcm
soundcore 4858 1 snd
sr_mod 12668 0
thermal 6403 0
ttm 43957 1 radeon
uas 6344 0
usbcore 113751 10 ndiswrapper,option,usb_wwan,usbserial,uas,usb_storage,uvcvideo,ohci_hcd,ehci_hcd
usbserial 26063 7 option,usb_wwan
usb_storage 34191 0
usb_wwan 7510 1 option
uvcvideo 54060 0
video 9652 0
videodev 56207 1 uvcvideo
wmi 7071 0
yenta_socket 18422 0
zlib_deflate 17878 1 ppp_deflate

depuis mon dernier boot :

May 16 11:39:53 localhost modem-manager: (ttyUSB0) opening serial device...
May 16 11:39:53 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/5: unlock no longer required
May 16 11:39:53 localhost modem-manager: (ttyUSB0) closing serial device...
May 16 11:39:58 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) starting connection 'Orange Internet Everywhere 3G 3'
May 16 11:39:58 localhost NetworkManager[2883]: <info> (ttyUSB0): device state change: 3 -> 4 (reason 0)
May 16 11:39:58 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
May 16 11:39:58 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
May 16 11:39:58 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete.
May 16 11:39:58 localhost modem-manager: (ttyUSB0) opening serial device...
May 16 11:39:58 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/5: state changed (disabled -> enabling)
May 16 11:39:58 localhost modem-manager: (ttyUSB1) opening serial device...
May 16 11:39:58 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/5: state changed (enabling -> enabled)
May 16 11:39:58 localhost NetworkManager[2883]: <info> WWAN now enabled by radio killswitch
May 16 11:39:58 localhost modem-manager: Registration state changed: 1
May 16 11:39:58 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/5: state changed (enabled -> registered)
May 16 11:39:59 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/5: state changed (registered -> connecting)
May 16 11:39:59 localhost modem-manager: Modem /org/freedesktop/ModemManager/Modems/5: state changed (connecting -> connected)
May 16 11:39:59 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) scheduled...
May 16 11:39:59 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) starting...
May 16 11:39:59 localhost NetworkManager[2883]: <info> (ttyUSB0): device state change: 4 -> 5 (reason 0)
May 16 11:39:59 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) successful.
May 16 11:39:59 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 3 of 5 (IP Configure Start) scheduled.
May 16 11:39:59 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) complete.
May 16 11:39:59 localhost NetworkManager[2883]: <info> Activation (ttyUSB0) Stage 3 of 5 (IP Configure Start) started...

C'est très impudique ce log un peu plus et ça indiquerait les mots de passes pages web visitées etc..

Message par **FoolEcho** » lun. 16 mai 2011, 12:07

oix02 a écrit :C'est très impudique ce log un peu plus et ça indiquerait les mots de passes pages web visitées etc..

Normalement, non.

C'est curieux car le module wifi ( rtlwifi et rtl8192ce ) est bien chargé (et si c'est chargé c'est bien que le noyau a reconnu qu'il devait le faire, donc qu'il voit bien le matériel...)... et normalement le firmware devrait être présent pour ces modules...

Le grep sur rtlwifi (ou juste rtl, cf. message précédent), ça donne quoi ? (si je ne me trompe pas, on devrait voir s'il communique, ou pas, avec le firmware)

oix02 · Message par **oix02** » mer. 18 mai 2011, 10:16

je teste ce soir j'ai oublié la clé chez moi

oix02 · Message par **oix02** » sam. 21 mai 2011, 00:23

Bon je ne trouve plus cette maudite clé (faut dire elle est petite !) je relance les investiguations dès que j'tombe dessus

oix02 · Message par **oix02** » lun. 13 juin 2011, 14:25

Salut !

j'avais oublié de le signaler je ne sais plus très bien comment j'ai fait mais ça marche. Je crois que j'ai tout viré et recompilé après avoir retelechargé le premier driver manifestement ça a réglé le problème car au reboot le driver fut chargé comme un grand !

ouf !

Merci

oix02 · Message par **oix02** » mar. 14 juin 2011, 15:53

trop vite parlé j'suis dégouté j'ai fait une grosse mise à jour (depuis presque deux mois je n'en avais pas fait) et la vlan le wifi ne fonctionne plus mise à part lorsque je suis à 50 cm de la box

j'suis sur que c’est du au mise à jour parceque ça s'est déconnecté durant la MAJ depuis impossible de se connecter à plus du'n mètre de la box, je perd le signal automatiquement si je m'éloigne avec le pc..

voila le log de ladite MAJ :

[2011-06-13 14:35] Running 'pacman -R madwifi'
[2011-06-13 14:35] Running 'pacman -R ndiswrapper'
[2011-06-13 14:36] removed ndiswrapper (1.56-9)
[2011-06-13 14:36] Running 'pacman -Suy'
[2011-06-13 14:36] synchronizing package lists
[2011-06-13 14:36] starting full system upgrade
[2011-06-13 15:08] upgraded accountsservice (0.6.10-1 -> 0.6.12-1)
[2011-06-13 15:08] upgraded attr (2.4.44-3 -> 2.4.46-1)
[2011-06-13 15:08] upgraded acl (2.2.49-2 -> 2.2.51-1)
[2011-06-13 15:08] upgraded amule (10561-1 -> 10576-1)
[2011-06-13 15:08] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
[2011-06-13 15:08] upgraded avahi (0.6.30-2 -> 0.6.30-3)
[2011-06-13 15:08] upgraded bison (2.4.3-1 -> 2.5-1)
[2011-06-13 15:08] upgraded bluez (4.93-1 -> 4.93-2)
[2011-06-13 15:08] upgraded gcc-libs (4.6.0-5 -> 4.6.0-6)
[2011-06-13 15:08] upgraded icu (4.6.1-2 -> 4.8-1)
[2011-06-13 15:08] upgraded boost-libs (1.46.0-4 -> 1.46.1-3)
[2011-06-13 15:09] upgraded bzr (2.3.1-1 -> 2.3.3-1)
[2011-06-13 15:09] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-06-13 15:09] upgraded coreutils (8.12-1 -> 8.12-3)
[2011-06-13 15:09] upgraded module-init-tools (3.12-2 -> 3.13-1)
[2011-06-13 15:09] ATTENTION UDEV:
[2011-06-13 15:09] ---------------
[2011-06-13 15:09] Kernel 2.6.32 or newer is now required.
[2011-06-13 15:09] OSS emulation modules are not loaded by default, add to rc.conf if needed.
[2011-06-13 15:09] Arch specific cd symlinks are now no longer created.
[2011-06-13 15:09] cd and net persistent rules will no longer be autogenerated,
[2011-06-13 15:09] see <https://wiki.archlinux.org/index.php/Udev> for details.
[2011-06-13 15:09] Errors are now logged (possibly to the console) by default.
[2011-06-13 15:09] ---------------
[2011-06-13 15:09] ATTENTION UDEV:
[2011-06-13 15:09] ---------------
[2011-06-13 15:09] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
[2011-06-13 15:09] blacklisting in MODULES no longer works.
[2011-06-13 15:09] See 'man modprobe.conf' for a replacement to blacklisting.
[2011-06-13 15:09] To disable a module mod1 on the kernel command line, use
[2011-06-13 15:09] mod1.disable=1
[2011-06-13 15:09] or
[2011-06-13 15:09] modprobe.blacklist=mod1
[2011-06-13 15:09] --
[2011-06-13 15:09] The following modules are no longer unconditionally loaded:
[2011-06-13 15:09] pcspkr irtty-sir analog lp ppdev ide-generic
[2011-06-13 15:09] Add them to MODULES in rc.conf if you need them.
[2011-06-13 15:09] ---------------
[2011-06-13 15:09] upgraded udev (168-1 -> 171-2)
[2011-06-13 15:09] upgraded device-mapper (2.02.84-1 -> 2.02.85-2)
[2011-06-13 15:09] upgraded cryptsetup (1.2.0-1 -> 1.3.1-1)
[2011-06-13 15:09] installed libssh2 (1.2.7-2)
[2011-06-13 15:09] upgraded curl (7.21.6-1 -> 7.21.6-2)
[2011-06-13 15:09] upgraded libtorrent-rasterbar (0.15.6-1 -> 0.15.6-2)
[2011-06-13 15:09] >>> Deluge's daemon is running default with the "deluge" user. The default download directory is /srv/deluge/.
[2011-06-13 15:09] You can change the user by editing /etc/conf.d/deluged
[2011-06-13 15:09] upgraded deluge (1.3.1-3 -> 1.3.2-1)
[2011-06-13 15:09] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
[2011-06-13 15:09] upgraded enchant (1.6.0-1 -> 1.6.0-3)
[2011-06-13 15:09] upgraded epdfview (0.1.7-8 -> 0.1.8-1)
[2011-06-13 15:09] upgraded gnutls (2.12.5-1 -> 2.12.6.1-1)
[2011-06-13 15:09] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-1)
[2011-06-13 15:09] upgraded libsoup (2.34.1-1 -> 2.34.2-1)
[2011-06-13 15:09] upgraded libgnome-keyring (3.0.1-1 -> 3.0.3-1)
[2011-06-13 15:09] upgraded libsoup-gnome (2.34.1-1 -> 2.34.2-1)
[2011-06-13 15:09] upgraded sqlite3 (3.7.6.1-1 -> 3.7.6.3-1)
[2011-06-13 15:09] upgraded libcups (1.4.6-2 -> 1.4.6-3)
[2011-06-13 15:09] upgraded pango (1.28.4-2 -> 1.28.4-3)
[2011-06-13 15:09] upgraded gtk3 (3.0.9-2 -> 3.0.11-1)
[2011-06-13 15:09] upgraded libwebkit3 (1.4.0-1 -> 1.4.1-1)
[2011-06-13 15:09] upgraded nspr (4.8.7-1 -> 4.8.8-1)
[2011-06-13 15:09] upgraded nss (3.12.9-1 -> 3.12.10-1)
[2011-06-13 15:09] installed gnome-js-common (0.1.2-1)
[2011-06-13 15:09] installed seed (3.0.0-1)
[2011-06-13 15:10] upgraded epiphany (3.0.2-1 -> 3.0.2-2)
[2011-06-13 15:10] upgraded ethtool (1:2.6.38-1 -> 1:2.6.39-1)
[2011-06-13 15:10] upgraded icon-naming-utils (0.8.90-1 -> 0.8.90-2)
[2011-06-13 15:10] upgraded gnome-icon-theme (3.0.0-1 -> 3.0.0-2)
[2011-06-13 15:10] upgraded evince (3.0.0-4 -> 3.0.2-1)
[2011-06-13 15:10] upgraded libgweather (3.0.0-1 -> 3.0.2-1)
[2011-06-13 15:10] upgraded evolution-data-server (3.0.1-2 -> 3.0.2.1-1)
[2011-06-13 15:10] upgraded libxfce4util (4.8.1-1 -> 4.8.1-2)
[2011-06-13 15:11] upgraded exo (0.6.1-1 -> 0.6.2-1)
[2011-06-13 15:11] upgraded file (5.07-1 -> 5.07-3)
[2011-06-13 15:11] upgraded filezilla (3.4.0-1 -> 3.5.0-1)
[2011-06-13 15:11] upgraded flashplugin (10.3.181.14-1 -> 10.3.181.22-1)
[2011-06-13 15:11] upgraded f-spot (0.8.2-1 -> 0.8.2-2)
[2011-06-13 15:11] upgraded gcc (4.6.0-5 -> 4.6.0-6)
[2011-06-13 15:11] upgraded glew (1.5.8-1 -> 1.6.0-1)
[2011-06-13 15:11] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-1)
[2011-06-13 15:11] upgraded gnash-common (0.8.9-2 -> 0.8.9-3)
[2011-06-13 15:11] upgraded gnome-backgrounds (3.0.1-1 -> 3.0.2-1)
[2011-06-13 15:11] upgraded startup-notification (0.10-2 -> 0.12-1)
[2011-06-13 15:11] upgraded gnome-desktop (3.0.1-2 -> 3.0.2-1)
[2011-06-13 15:12] upgraded gnome-settings-daemon (3.0.1-2 -> 3.0.2-1)
[2011-06-13 15:12] upgraded upower (0.9.10-1 -> 0.9.11-1)
[2011-06-13 15:12] upgraded gnome-control-center (3.0.1.1-2 -> 3.0.2-1)
[2011-06-13 15:12] upgraded gnome-keyring (3.0.1-1 -> 3.0.3-1)
[2011-06-13 15:12] upgraded libwnck3 (3.0.0-1 -> 3.0.2-1)
[2011-06-13 15:12] upgraded telepathy-glib (0.14.6-1 -> 0.14.7-1)
[2011-06-13 15:12] upgraded gnome-panel (3.0.0.1-3 -> 3.0.2-1)
[2011-06-13 15:12] upgraded gnome-session (3.0.1-1 -> 3.0.2-1)
[2011-06-13 15:12] upgraded gnome-themes-standard (3.0.1-1 -> 3.0.2-1)
[2011-06-13 15:12] upgraded yelp-xsl (3.0.1-1 -> 3.0.2-1)
[2011-06-13 15:12] upgraded xz (5.0.2-1 -> 5.0.3-1)
[2011-06-13 15:12] upgraded yelp (3.0.2-1 -> 3.0.3-1)
[2011-06-13 15:12] upgraded gnome-user-docs (3.0.3-1 -> 3.0.4-1)
[2011-06-13 15:12] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
[2011-06-13 15:12] upgraded goffice (0.8.14-1 -> 0.8.15-1)
[2011-06-13 15:12] upgraded grep (2.7-1 -> 2.8-1)
[2011-06-13 15:12] upgraded grub2-common (1.99~rc2.r3238-1 -> 1:1.99-3)
[2011-06-13 15:12] upgraded grub2-bios (1.99~rc2.r3238-1 -> 1:1.99-3)
[2011-06-13 15:13] upgraded gvfs (1.8.1-1 -> 1.8.2-1)
[2011-06-13 15:13] upgraded iproute2 (2.6.37-1 -> 2.6.38-3)
[2011-06-13 15:13] warning: /etc/inittab installed as /etc/inittab.pacnew
[2011-06-13 15:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-06-13 15:13] Blacklisting of modules is no longer supported in rc.conf,
[2011-06-13 15:13] please add blacklist entries to /etc/modprobe.d/ instead.
[2011-06-13 15:13] upgraded initscripts (2011.05.2-1 -> 2011.06.4-1)
[2011-06-13 15:13] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
[2011-06-13 15:13] upgraded jack (0.120.1-1 -> 0.120.2-1)
[2011-06-13 15:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
[2011-06-13 15:13] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-06-13 15:13] upgraded kdebase-workspace (4.6.3-1 -> 4.6.3-2)
[2011-06-13 15:14] upgraded kdeedu-marble (4.6.3-1 -> 4.6.3-2)
[2011-06-13 15:14] upgraded qt (4.7.3-1 -> 4.7.3-3)
[2011-06-13 15:14] upgraded strigi (git20110405-1 -> 0.7.5-1)
[2011-06-13 15:14] upgraded parted (2.3-1 -> 2.4-1)
[2011-06-13 15:14] upgraded lvm2 (2.02.84-1 -> 2.02.85-2)
[2011-06-13 15:14] upgraded udisks (1.0.3-2 -> 1.0.3-3)
[2011-06-13 15:14] upgraded kdelibs (4.6.3-2 -> 4.6.3-3)
[2011-06-13 15:14] upgraded networkmanager (0.8.999-1 -> 0.8.9997-1)
[2011-06-13 15:14] upgraded kdeplasma-applets-networkmanagement (1:git20110323-1 -> 1:git20110531-1)
[2011-06-13 15:14] upgraded kdesdk-kate (4.6.3-1 -> 4.6.3-2)
[2011-06-13 15:14] installed linux-firmware (20110512-2)
[2011-06-13 15:14] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.4-1)
[2011-06-13 15:14] warning: /etc/mkinitcpio.conf installed as /etc/mkinitcpio.conf.pacnew
[2011-06-13 15:14] upgraded mkinitcpio (0.6.11-1 -> 0.6.13-1)
[2011-06-13 15:15] >>> Updating module dependencies. Please wait ...
[2011-06-13 15:17] >>> MKINITCPIO SETUP
[2011-06-13 15:17] >>> ----------------
[2011-06-13 15:17] >>> If you use LVM2, Encrypted root or software RAID,
[2011-06-13 15:17] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-06-13 15:17] >>> More information about mkinitcpio setup can be found here:
[2011-06-13 15:17] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-06-13 15:17]
[2011-06-13 15:17] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-06-13 15:17] ==> Building image "default"
[2011-06-13 15:17] ==> Running command: /sbin/mkinitcpio -k 2.6.39-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-06-13 15:17] :: Begin build
[2011-06-13 15:17] :: Parsing hook [autodetect]
[2011-06-13 15:17] :: Parsing hook [base]
[2011-06-13 15:17] :: Parsing hook [udev]
[2011-06-13 15:17] :: Parsing hook [pata]
[2011-06-13 15:17] :: Parsing hook [scsi]
[2011-06-13 15:17] :: Parsing hook [sata]
[2011-06-13 15:17] :: Parsing hook [filesystems]
[2011-06-13 15:17] :: Parsing hook [keymap]
[2011-06-13 15:17] :: Generating module dependencies
[2011-06-13 15:17] :: Generating image '/boot/kernel26.img'
[2011-06-13 15:17] :: Image generation successful
[2011-06-13 15:17] ==> SUCCESS
[2011-06-13 15:17] ==> Building image "fallback"
[2011-06-13 15:17] ==> Running command: /sbin/mkinitcpio -k 2.6.39-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-06-13 15:17] :: Begin build
[2011-06-13 15:17] :: Parsing hook [base]
[2011-06-13 15:17] :: Parsing hook [udev]
[2011-06-13 15:17] :: Parsing hook [pata]
[2011-06-13 15:17] :: Parsing hook [scsi]
[2011-06-13 15:18] :: Parsing hook [sata]
[2011-06-13 15:18] :: Parsing hook [filesystems]
[2011-06-13 15:18] :: Parsing hook [keymap]
[2011-06-13 15:18] :: Generating module dependencies
[2011-06-13 15:18] :: Generating image '/boot/kernel26-fallback.img'
[2011-06-13 15:18] :: Image generation successful
[2011-06-13 15:18] ==> SUCCESS
[2011-06-13 15:18] upgraded kernel26 (2.6.38.6-2 -> 2.6.39.1-1)
[2011-06-13 15:18] upgraded kernel26-headers (2.6.38.6-2 -> 2.6.39.1-1)
[2011-06-13 15:18] upgraded less (443-1 -> 443-2)
[2011-06-13 15:18] upgraded libass (0.9.11-1 -> 0.9.12-1)
[2011-06-13 15:18] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
[2011-06-13 15:18] upgraded libftdi (0.18-2 -> 0.19-1)
[2011-06-13 15:18] upgraded libmysqlclient (5.5.12-1 -> 5.5.13-1)
[2011-06-13 15:18] installed libwps (0.2.2-1)
[2011-06-13 15:18] upgraded neon (0.29.3-3 -> 0.29.6-1)
[2011-06-13 15:18] installed libtextcat (2.2-8)
[2011-06-13 15:19] upgraded libreoffice (3.3.2-2 -> 3.4.0-2)
[2011-06-13 15:19] upgraded libssh (0.4.8-1 -> 0.5.0-1)
[2011-06-13 15:19] upgraded libwebkit (1.4.0-1 -> 1.4.1-1)
[2011-06-13 15:19] upgraded libxfce4ui (4.8.0-1 -> 4.8.0-3)
[2011-06-13 15:19] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-4)
[2011-06-13 15:19] upgraded make (3.81-5 -> 3.82-3)
[2011-06-13 15:19] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
[2011-06-13 15:19] upgraded modemmanager (0.4.996-1 -> 0.4.997-1)
[2011-06-13 15:19] upgraded mysql-clients (5.5.12-1 -> 5.5.13-1)
[2011-06-13 15:20] upgraded mysql (5.5.12-1 -> 5.5.13-1)
[2011-06-13 15:20] upgraded nautilus (3.0.1.1-3 -> 3.0.2-1)
[2011-06-13 15:20] hostname and {,yp,nis}domainname has moved:
[2011-06-13 15:20] ----------
[2011-06-13 15:20] hostname is now in coreutils
[2011-06-13 15:20] domainname is now in yp-tools
[2011-06-13 15:20] their functionality might have changed slightly
[2011-06-13 15:20]
[2011-06-13 15:20] dnsdomainname remains in net-tools
[2011-06-13 15:20] ----------
[2011-06-13 15:20] upgraded net-tools (1.60-14 -> 1.60-18)
[2011-06-13 15:20] upgraded network-manager-applet (0.8.999-1 -> 0.8.9997-1)
[2011-06-13 15:20] upgraded ntrack (1:13-1 -> 1:13-2)
[2011-06-13 15:20] upgraded openjdk6 (6.b22_1.10.1-1 -> 6.b22_1.10.2-1)
[2011-06-13 15:20] upgraded partitionmanager (1.0.3-1 -> 1.0.3-2)
[2011-06-13 15:20] upgraded php (5.3.6-3 -> 5.3.6-4)
[2011-06-13 15:20] upgraded pixman (0.20.2-1 -> 0.22.0-1)
[2011-06-13 15:20] upgraded pkg-config (0.25-3 -> 0.26-1)
[2011-06-13 15:20] upgraded raptor (2.0.2-1 -> 2.0.3-1)
[2011-06-13 15:20] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p180-2)
[2011-06-13 15:20] upgraded sudo (1.8.1.p1-1 -> 1.8.1.p2-1)
[2011-06-13 15:20] upgraded swh-plugins (0.4.15-3 -> 0.4.15-4)
[2011-06-13 15:21] upgraded thunderbird (3.1.10-2 -> 3.1.10-3)
[2011-06-13 15:21] upgraded totem-plparser (2.32.4-1 -> 2.32.5-1)
[2011-06-13 15:21] upgraded totem (3.0.1-1 -> 3.0.1-2)
[2011-06-13 15:21] upgraded totem-plugin (3.0.1-1 -> 3.0.1-2)
[2011-06-13 15:22] Updating font cache... done.
[2011-06-13 15:22] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
[2011-06-13 15:22] upgraded v4l-utils (0.8.3-1 -> 0.8.4-1)
[2011-06-13 15:22] ===> You must reload vboxdrv module before starting VirtualBox:
[2011-06-13 15:22] ===> # modprobe vboxdrv
[2011-06-13 15:22] ===>
[2011-06-13 15:22] ===> You must reload vboxnetflt for Host Interface Networking:
[2011-06-13 15:22] ===> # modprobe vboxnetflt
[2011-06-13 15:22] ===>
[2011-06-13 15:22] ===> You must reload vboxnetadp for Host-Only networking:
[2011-06-13 15:22] ===> # modprobe vboxnetadp
[2011-06-13 15:22] ===>
[2011-06-13 15:22] ===> To load it automatically, add vboxdrv module
[2011-06-13 15:22] ===> to the MODULES array in /etc/rc.conf.
[2011-06-13 15:22]
[2011-06-13 15:22] *** To recompile the modules do /etc/rc.d/vboxdrv setup ***
[2011-06-13 15:22] upgraded virtualbox (4.0.8-2 -> 4.0.8-4)
[2011-06-13 15:23] upgraded vlc (1.1.9-1 -> 1.1.10-2)
[2011-06-13 15:23] upgraded vte-common (0.28.0-1 -> 0.28.0-2)
[2011-06-13 15:23] upgraded vte (0.28.0-1 -> 0.28.0-2)
[2011-06-13 15:23] upgraded vte3 (0.28.0-1 -> 0.28.0-2)
[2011-06-13 15:23] upgraded wine (1.3.20-1 -> 1.3.22-1)
[2011-06-13 15:23] upgraded xf86-input-synaptics (1.4.0-2 -> 1.4.0.901-1)
[2011-06-13 15:23] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-06-13 15:23] upgraded xorg-server-common (1.10.1-1 -> 1.10.2-1)
[2011-06-13 15:23] upgraded xorg-server (1.10.1-1 -> 1.10.2-1)
[2011-06-13 15:23] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-06-13 15:23] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-06-13 15:23] upgraded xterm (269-1 -> 270-1)
[2011-06-13 15:23] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
[2011-06-13 15:23] upgraded zope-interface (3.6.1-1 -> 3.6.3-1)

C'est peut être la MAJ de network manager ? j'vais tenter de remettre l'ancienne version mais je n'y crois pas vraiment..

edit : j'avais nettoyé mon cache de pacman je peux trouver quelque part networkmanager 0.8.999-1 ?

pas trouvé sur internet à part un rpm

Arch Linux

Archlinux.fr [Forums]

[wifi] installation driver belkin (résolu)

[wifi] installation driver belkin (résolu)

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin

Re: [wifi] installation driver belkin (résolu)