Architecture ARM, archlinuxarm, raspberrypi ...
syll
Daikyu
Messages : 79 Inscription : sam. 01 déc. 2007, 18:33Localisation : Toulouse
Message
par syll jeu. 09 avr. 2026, 10:24
Bonjour
J'ai mis à jour un Raspberry pi v2 et il ne démarre plus.
En général j'y accède via ssh et la connexion ne fonctionne plus. Si je branche un écran je vois les messages de démarrage mais rapidement l'écran s'éteint (ne reçoit plus de signal). Tout ce que je parviens à lire ce sont des erreurs concernant le système de journalisation, qui ne fonctionne manifestement plus.
Le journal des mises à jour de pacman contient des erreurs concernant la journalisation, je ne sais pas si c'est un indice :
Code : Tout sélectionner
[2026-04-08T08:44:24+0200] [ALPM-SCRIPTLET] Job for systemd-journald.service failed because the control process exited with error code.
[2026-04-08T08:44:24+0200] [ALPM-SCRIPTLET] See "systemctl status systemd-journald.service" and "journalctl -xeu systemd-journald.service" for details.
Je ne sais pas s'il y a moyen de geler le démarrage du Pi pour lire le détail des messages avant que l'écran ne s'éteigne.
Quelques idées ?
Merci
Sylvain
benjarobin
Maître du Kyudo
Messages : 17779 Inscription : sam. 30 mai 2009, 15:48Localisation : Lyon
Message
par benjarobin jeu. 09 avr. 2026, 19:00
Bonjour,
syll
Daikyu
Messages : 79 Inscription : sam. 01 déc. 2007, 18:33Localisation : Toulouse
Message
par syll ven. 10 avr. 2026, 12:49
Voici le journal de la mise à jour (pacman) :
Code : Tout sélectionner
[2026-04-08T08:21:40+0200] [PACMAN] Running 'pacman -Syu'
[2026-04-08T08:21:40+0200] [PACMAN] synchronizing package lists
[2026-04-08T08:21:50+0200] [PACMAN] Running 'pacman -Syu --disable-sandbox'
[2026-04-08T08:21:50+0200] [PACMAN] synchronizing package lists
[2026-04-08T08:21:54+0200] [PACMAN] starting full system upgrade
[2026-04-08T08:35:58+0200] [PACMAN] Running 'pacman -Syu --disable-sandbox'
[2026-04-08T08:35:58+0200] [PACMAN] synchronizing package lists
[2026-04-08T08:35:59+0200] [PACMAN] starting full system upgrade
[2026-04-08T08:37:06+0200] [ALPM] transaction started
[2026-04-08T08:37:07+0200] [ALPM] upgraded adwaita-fonts (49.0-2 -> 50.0-1)
[2026-04-08T08:37:09+0200] [ALPM] upgraded tzdata (2025c-1 -> 2026a-1)
[2026-04-08T08:37:09+0200] [ALPM] upgraded iana-etc (20260203-1 -> 20260328-1)
[2026-04-08T08:37:10+0200] [ALPM] upgraded aom (3.13.1-2 -> 3.13.3-1)
[2026-04-08T08:37:10+0200] [ALPM] upgraded zlib (1:1.3.2-2 -> 1:1.3.2-3)
[2026-04-08T08:37:10+0200] [ALPM] upgraded libnghttp2 (1.68.0-1 -> 1.68.1-1)
[2026-04-08T08:37:11+0200] [ALPM] upgraded leancrypto (1.6.0-1 -> 1.7.1-1)
[2026-04-08T08:37:14+0200] [ALPM] upgraded ncurses (6.6-1 -> 6.6-2)
[2026-04-08T08:37:14+0200] [ALPM] upgraded xz (5.8.2-1 -> 5.8.3-1)
[2026-04-08T08:37:15+0200] [ALPM] upgraded libngtcp2 (1.20.0-1 -> 1.22.0-1)
[2026-04-08T08:37:16+0200] [ALPM] upgraded sqlite (3.51.2-1 -> 3.52.0-1)
[2026-04-08T08:37:16+0200] [ALPM] upgraded util-linux-libs (2.41.3-2 -> 2.42-1)
[2026-04-08T08:37:17+0200] [ALPM] upgraded e2fsprogs (1.47.3-2 -> 1.47.4-1)
[2026-04-08T08:37:17+0200] [ALPM] upgraded lmdb (0.9.33-1 -> 0.9.35-1)
[2026-04-08T08:37:17+0200] [ALPM] upgraded libldap (2.6.12-1 -> 2.6.13-1)
[2026-04-08T08:37:35+0200] [ALPM] upgraded systemd-libs (259.1-1 -> 260.1-1)
[2026-04-08T08:37:35+0200] [ALPM] upgraded libcap-ng (0.9-1 -> 0.9.2-1)
[2026-04-08T08:37:36+0200] [ALPM] upgraded audit (4.1.2-2 -> 4.1.4-2)
[2026-04-08T08:37:36+0200] [ALPM] upgraded ca-certificates-mozilla (3.120.1-1 -> 3.122-1)
[2026-04-08T08:37:37+0200] [ALPM] upgraded curl (8.18.0-3 -> 8.19.0-1)
[2026-04-08T08:37:42+0200] [ALPM] upgraded icu (78.2-2 -> 78.3-1)
[2026-04-08T08:37:43+0200] [ALPM] upgraded libxml2 (2.15.1-5 -> 2.15.2-1)
[2026-04-08T08:37:43+0200] [ALPM] upgraded libarchive (3.8.5-1 -> 3.8.6-1)
[2026-04-08T08:37:43+0200] [ALPM] upgraded gawk (5.3.2-1 -> 5.4.0-1)
[2026-04-08T08:37:43+0200] [ALPM] upgraded libksba (1.6.7-2 -> 1.6.8-1)
[2026-04-08T08:37:46+0200] [ALPM] upgraded glib2 (2.86.4-1 -> 2.86.5-1)
[2026-04-08T08:37:47+0200] [ALPM] upgraded gpgme (2.0.1-1 -> 2.0.1-3)
[2026-04-08T08:37:47+0200] [ALPM] upgraded device-mapper (2.03.38-1 -> 2.03.39-1)
[2026-04-08T08:37:47+0200] [ALPM] upgraded cryptsetup (2.8.4-1 -> 2.8.6-1)
[2026-04-08T08:37:48+0200] [ALPM] upgraded libelf (0.194-1.1 -> 0.194-2)
[2026-04-08T08:37:48+0200] [ALPM] upgraded hwdata (0.404-1 -> 0.405-1)
[2026-04-08T08:37:49+0200] [ALPM] upgraded file (5.46-5 -> 5.47-2)
[2026-04-08T08:37:53+0200] [ALPM] upgraded util-linux (2.41.3-2 -> 2.42-1)
[2026-04-08T08:37:53+0200] [ALPM] upgraded expat (2.7.4-1 -> 2.7.5-1)
[2026-04-08T08:37:59+0200] [ALPM] upgraded systemd (259.1-1 -> 260.1-1)
[2026-04-08T08:38:04+0200] [ALPM-SCRIPTLET] :: This is a systemd feature update. You may want to have a look at
[2026-04-08T08:38:04+0200] [ALPM-SCRIPTLET] NEWS for what changed, or if you observe unexpected behavior:
[2026-04-08T08:38:04+0200] [ALPM-SCRIPTLET] /usr/share/doc/systemd/NEWS
[2026-04-08T08:38:04+0200] [ALPM-SCRIPTLET] Created symlink '/etc/systemd/system/autovt@.service' → '/usr/lib/systemd/system/getty@.service'.
[2026-04-08T08:38:07+0200] [ALPM] upgraded archlinux-keyring (20260206-1 -> 20260323-1)
[2026-04-08T08:38:09+0200] [ALPM-SCRIPTLET] ==> Ajout des clés depuis archlinux.gpg…
[2026-04-08T08:39:14+0200] [ALPM-SCRIPTLET] ==> Désactivation des clés révoquées du trousseau de clés…
[2026-04-08T08:39:15+0200] [ALPM-SCRIPTLET] -> 2 clés ont été désactivées.
[2026-04-08T08:39:15+0200] [ALPM-SCRIPTLET] ==> Mise à jour de la base de données de confiance…
[2026-04-08T08:39:15+0200] [ALPM-SCRIPTLET] gpg: Remarque : les signatures de clef de tierces parties utilisant l’algorithme SHA1 sont rejetées
[2026-04-08T08:39:15+0200] [ALPM-SCRIPTLET] gpg: (utiliser l'option '--allow-weak-key-signatures' pour outrepasser)
[2026-04-08T08:39:15+0200] [ALPM-SCRIPTLET] gpg: marginals needed: 3 completes needed: 1 trust model: pgp
[2026-04-08T08:39:16+0200] [ALPM-SCRIPTLET] gpg: profondeur : 0 valables : 1 signées : 9
[2026-04-08T08:39:16+0200] [ALPM-SCRIPTLET] confiance : 0 i., 0 n.d., 0 j., 0 m., 0 t., 1 u.
[2026-04-08T08:39:17+0200] [ALPM-SCRIPTLET] gpg: profondeur : 1 valables : 9 signées : 85
[2026-04-08T08:39:17+0200] [ALPM-SCRIPTLET] confiance : 0 i., 0 n.d., 0 j., 9 m., 0 t., 0 u.
[2026-04-08T08:39:17+0200] [ALPM-SCRIPTLET] gpg: profondeur : 2 valables : 72 signées : 25
[2026-04-08T08:39:17+0200] [ALPM-SCRIPTLET] confiance : 72 i., 0 n.d., 0 j., 0 m., 0 t., 0 u.
[2026-04-08T08:39:17+0200] [ALPM-SCRIPTLET] gpg: la prochaine vérification de la base de confiance aura lieu le 2026-10-21
[2026-04-08T08:39:18+0200] [ALPM] upgraded at-spi2-core (2.58.3-1 -> 2.58.4-1)
[2026-04-08T08:39:18+0200] [ALPM] upgraded avahi (1:0.9rc3-1 -> 1:0.9rc4-1)
[2026-04-08T08:39:18+0200] [ALPM] upgraded bubblewrap (0.11.0-1 -> 0.11.1-1)
[2026-04-08T08:39:18+0200] [ALPM] upgraded libwbclient (2:4.23.5-1 -> 2:4.24.0-1)
[2026-04-08T08:39:18+0200] [ALPM] upgraded cifs-utils (7.4-1 -> 7.5-1)
[2026-04-08T08:39:19+0200] [ALPM] upgraded crypto++ (8.7.0-1 -> 8.9.0-3)
[2026-04-08T08:39:19+0200] [ALPM] upgraded dhcpcd (10.3.0-1 -> 10.3.1-1)
[2026-04-08T08:39:20+0200] [ALPM] upgraded elfutils (0.194-1.1 -> 0.194-2)
[2026-04-08T08:39:20+0200] [ALPM] upgraded libpng (1.6.55-1 -> 1.6.56-1)
[2026-04-08T08:39:20+0200] [ALPM] upgraded freetype2 (2.14.1-2 -> 2.14.3-1)
[2026-04-08T08:39:20+0200] [ALPM] upgraded giflib (5.2.2-2 -> 6.1.2-1)
[2026-04-08T08:39:20+0200] [ALPM] upgraded libjpeg-turbo (3.1.3-1 -> 3.1.4.1-1)
[2026-04-08T08:39:21+0200] [ALPM] upgraded fluxbox (1.3.7+211+g9d8202f3-2 -> 1.3.7+221+g36f99b92-1)
[2026-04-08T08:39:21+0200] [ALPM] upgraded gperftools (2.17.2-1 -> 2.18.1-1)
[2026-04-08T08:39:29+0200] [ALPM] upgraded perl (5.42.0-1 -> 5.42.1-1)
[2026-04-08T08:40:02+0200] [ALPM] upgraded groff (1.23.0-8 -> 1.24.1-1)
[2026-04-08T08:40:04+0200] [ALPM] upgraded gstreamer (1.28.0-2 -> 1.28.1-2)
[2026-04-08T08:40:05+0200] [ALPM] upgraded libedit (20250104_3.1-1 -> 20251016_3.1-1)
[2026-04-08T08:40:21+0200] [ALPM] upgraded llvm-libs (21.1.8-1 -> 22.1.2-1)
[2026-04-08T08:40:22+0200] [ALPM] upgraded spirv-tools (1:1.4.341.0-1 -> 1:1.4.341.0-2)
[2026-04-08T08:40:22+0200] [ALPM] upgraded libpciaccess (0.18.1-2 -> 0.19-1)
[2026-04-08T08:40:28+0200] [ALPM] upgraded mesa (1:25.3.5-1 -> 1:26.0.4-1)
[2026-04-08T08:40:29+0200] [ALPM] upgraded gst-plugins-base-libs (1.28.0-2 -> 1.28.1-2)
[2026-04-08T08:40:30+0200] [ALPM] upgraded libva (2.22.0-1 -> 2.23.0-1)
[2026-04-08T08:40:30+0200] [ALPM] upgraded vmaf (3.0.0-2 -> 3.1.0-1)
[2026-04-08T08:40:30+0200] [ALPM] upgraded libsoup3 (3.6.6-1 -> 3.6.6-2)
[2026-04-08T08:40:32+0200] [ALPM] upgraded xkeyboard-config (2.46-1 -> 2.47-1)
[2026-04-08T08:40:34+0200] [ALPM] upgraded gst-plugins-bad-libs (1.28.0-2 -> 1.28.1-2)
[2026-04-08T08:40:34+0200] [ALPM] upgraded harfbuzz (12.3.2-1 -> 14.0.0-2)
[2026-04-08T08:40:35+0200] [ALPM] upgraded pango (1:1.57.0-2 -> 1:1.57.1-1)
[2026-04-08T08:40:35+0200] [ALPM] upgraded gtk-update-icon-cache (1:4.20.3-1 -> 1:4.20.4-1)
[2026-04-08T08:41:02+0200] [ALPM] upgraded gtk3 (1:3.24.51-1 -> 1:3.24.52-1)
[2026-04-08T08:41:04+0200] [ALPM] upgraded imath (3.2.2-3 -> 3.2.2-4)
[2026-04-08T08:41:04+0200] [ALPM] installed nftables (1:1.1.6-3)
[2026-04-08T08:41:05+0200] [ALPM] upgraded iptables (1:1.8.11-2 -> 1:1.8.11-4)
[2026-04-08T08:41:05+0200] [ALPM] upgraded ldb (2:4.23.5-1 -> 2:4.24.0-1)
[2026-04-08T08:41:05+0200] [ALPM] upgraded libavif (1.3.0-5 -> 1.4.1-1)
[2026-04-08T08:41:06+0200] [ALPM] upgraded libcaca (0.99.beta20-6 -> 0.99.beta20-7)
[2026-04-08T08:41:06+0200] [ALPM] upgraded libcamera-ipa (0.7.0-1 -> 0.7.0-3)
[2026-04-08T08:41:07+0200] [ALPM] upgraded libcamera (0.7.0-1 -> 0.7.0-3)
[2026-04-08T08:41:07+0200] [ALPM] upgraded libde265 (1.0.16-2 -> 1.0.18-1)
[2026-04-08T08:41:07+0200] [ALPM] upgraded libid3tag (0.16.3-2 -> 0.16.4-1)
[2026-04-08T08:41:07+0200] [ALPM] installed lua54 (5.4.8-6)
[2026-04-08T08:41:08+0200] [ALPM] upgraded libinput (1.30.1-1 -> 1.31.1-1)
[2026-04-08T08:41:08+0200] [ALPM] upgraded libpipewire (1:1.4.10-2 -> 1:1.6.2-1)
[2026-04-08T08:41:08+0200] [ALPM] upgraded libptytty (2.0-5 -> 2.0-6)
[2026-04-08T08:41:08+0200] [ALPM] upgraded libupnp (1.14.25-1 -> 1.14.26-1)
[2026-04-08T08:41:09+0200] [ALPM] upgraded linux-firmware-whence (20260110-1 -> 20260309-1)
[2026-04-08T08:41:15+0200] [ALPM] upgraded linux-firmware-amdgpu (20260110-1 -> 20260309-1)
[2026-04-08T08:41:31+0200] [ALPM] upgraded linux-firmware-atheros (20260110-1 -> 20260309-1)
[2026-04-08T08:41:34+0200] [ALPM] upgraded linux-firmware-broadcom (20260110-1 -> 20260309-1)
[2026-04-08T08:41:35+0200] [ALPM] upgraded linux-firmware-cirrus (20260110-1 -> 20260309-1)
[2026-04-08T08:42:16+0200] [ALPM] upgraded linux-firmware-intel (20260110-1 -> 20260309-1)
[2026-04-08T08:42:23+0200] [ALPM] upgraded linux-firmware-mediatek (20260110-1 -> 20260309-1)
[2026-04-08T08:42:55+0200] [ALPM] upgraded linux-firmware-nvidia (20260110-1 -> 20260309-1)
[2026-04-08T08:43:06+0200] [ALPM] upgraded linux-firmware-other (20260110-1 -> 20260309-1)
[2026-04-08T08:43:06+0200] [ALPM] upgraded linux-firmware-radeon (20260110-1 -> 20260309-1)
[2026-04-08T08:43:08+0200] [ALPM] upgraded linux-firmware-realtek (20260110-1 -> 20260309-1)
[2026-04-08T08:43:08+0200] [ALPM] upgraded linux-firmware (20260110-1 -> 20260309-1)
[2026-04-08T08:43:09+0200] [ALPM] upgraded lua (5.4.8-2 -> 5.5.0-2)
[2026-04-08T08:43:09+0200] [ALPM] upgraded lua53-lgi (0.9.2-12 -> 0.9.2-13)
[2026-04-08T08:43:09+0200] [ALPM] upgraded mpdecimal (4.0.1-1 -> 4.0.1-3)
[2026-04-08T08:43:10+0200] [ALPM] upgraded nss (3.120.1-1 -> 3.122-1)
[2026-04-08T08:43:10+0200] [ALPM] installed openjph (0.26.3-3)
[2026-04-08T08:43:11+0200] [ALPM] upgraded openexr (3.4.4-1 -> 3.4.9-1)
[2026-04-08T08:43:11+0200] [ALPM] upgraded openssh (10.2p1-2 -> 10.3p1-1)
[2026-04-08T08:43:13+0200] [ALPM] upgraded pipewire (1:1.4.10-2 -> 1:1.6.2-1)
[2026-04-08T08:43:14+0200] [ALPM] upgraded python-importlib-metadata (8.7.1-3 -> 9.0.0-1)
[2026-04-08T08:43:16+0200] [ALPM] upgraded raspberrypi-bootloader (20260219-1 -> 20260325-1)
[2026-04-08T08:43:16+0200] [ALPM] upgraded raspberrypi-utils (20251217-1 -> 20260319-1)
[2026-04-08T08:43:17+0200] [ALPM] upgraded sdl3 (3.4.2-1 -> 3.4.4-1)
[2026-04-08T08:43:18+0200] [ALPM] upgraded sdl2-compat (2.32.64-1 -> 2.32.66-1)
[2026-04-08T08:43:21+0200] [ALPM] upgraded smbclient (2:4.23.5-1 -> 2:4.24.0-1)
[2026-04-08T08:43:21+0200] [ALPM] upgraded systemd-sysvcompat (259.1-1 -> 260.1-1)
[2026-04-08T08:43:21+0200] [ALPM] upgraded unrar (1:7.2.4-1 -> 1:7.2.5-1)
[2026-04-08T08:43:43+0200] [ALPM] upgraded vim-runtime (9.2.0038-1 -> 9.2.0315-1)
[2026-04-08T08:43:44+0200] [ALPM] upgraded vim (9.2.0038-1 -> 9.2.0315-1)
[2026-04-08T08:43:46+0200] [ALPM] upgraded wxwidgets-common (3.2.9-4 -> 3.2.10-1)
[2026-04-08T08:43:48+0200] [ALPM] upgraded wxwidgets-gtk3 (3.2.9-4 -> 3.2.10-1)
[2026-04-08T08:43:48+0200] [ALPM] upgraded xorg-setxkbmap (1.3.4-2 -> 1.3.5-1)
[2026-04-08T08:43:48+0200] [ALPM] upgraded xterm (406-1 -> 407-1)
[2026-04-08T08:43:51+0200] [ALPM] transaction completed
[2026-04-08T08:44:03+0200] [ALPM] running '20-systemd-sysusers.hook'...
[2026-04-08T08:44:04+0200] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-04-08T08:44:05+0200] [ALPM] running '25-systemd-catalog.hook'...
[2026-04-08T08:44:06+0200] [ALPM] running '25-systemd-hwdb.hook'...
[2026-04-08T08:44:13+0200] [ALPM] running '25-systemd-sysctl.hook'...
[2026-04-08T08:44:13+0200] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2026-04-08T08:44:16+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-04-08T08:44:17+0200] [ALPM] running '30-update-mime-database.hook'...
[2026-04-08T08:44:23+0200] [ALPM] running '35-systemd-enqueue-marked.hook'...
[2026-04-08T08:44:24+0200] [ALPM-SCRIPTLET] Job for systemd-journald.service failed because the control process exited with error code.
[2026-04-08T08:44:24+0200] [ALPM-SCRIPTLET] See "systemctl status systemd-journald.service" and "journalctl -xeu systemd-journald.service" for details.
[2026-04-08T08:44:24+0200] [ALPM-SCRIPTLET] Job for systemd-resolved.service failed because the control process exited with error code.
[2026-04-08T08:44:24+0200] [ALPM-SCRIPTLET] See "systemctl status systemd-resolved.service" and "journalctl -xeu systemd-resolved.service" for details.
[2026-04-08T08:44:25+0200] [ALPM] running '35-systemd-udev-reload.hook'...
[2026-04-08T08:44:28+0200] [ALPM] running '35-systemd-update.hook'...
[2026-04-08T08:44:28+0200] [ALPM] running '40-update-ca-trust.hook'...
[2026-04-08T08:44:38+0200] [ALPM] running '70-openssh-restart-sshd.hook'...
[2026-04-08T08:44:40+0200] [ALPM] running '90-mkinitcpio-install.hook'...
[2026-04-08T08:44:43+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-rpi-legacy.preset: 'default'
[2026-04-08T08:44:43+0200] [ALPM-SCRIPTLET] ==> Using configuration file: '/etc/mkinitcpio.conf'
[2026-04-08T08:44:43+0200] [ALPM-SCRIPTLET] -> -k 5.10.92-2-rpi-legacy-ARCH -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2026-04-08T08:44:45+0200] [ALPM-SCRIPTLET] ==> Starting build: '5.10.92-2-rpi-legacy-ARCH'
[2026-04-08T08:44:45+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-04-08T08:44:48+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-04-08T08:45:00+0200] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2026-04-08T08:45:00+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-04-08T08:45:00+0200] [ALPM-SCRIPTLET] ==> WARNING: architecture 'armv7l' not supported, skipping hook
[2026-04-08T08:45:00+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-04-08T08:45:01+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-04-08T08:45:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-04-08T08:45:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2026-04-08T08:45:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-04-08T08:45:19+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-04-08T08:45:21+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-04-08T08:45:21+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-04-08T08:45:22+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-04-08T08:45:22+0200] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: '/boot/initramfs-linux.img'
[2026-04-08T08:45:23+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-04-08T08:45:38+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-04-08T08:45:39+0200] [ALPM] running 'dbus-reload.hook'...
[2026-04-08T08:47:10+0200] [ALPM-SCRIPTLET] Job for dbus-broker.service failed.
[2026-04-08T08:47:10+0200] [ALPM-SCRIPTLET] See "systemctl status dbus-broker.service" and "journalctl -xeu dbus-broker.service" for details.
[2026-04-08T08:47:10+0200] [ALPM] running 'detect-old-perl-modules.hook'...
[2026-04-08T08:47:10+0200] [ALPM] running 'fontconfig.hook'...
[2026-04-08T08:47:23+0200] [ALPM] running 'glib-compile-schemas.hook'...
[2026-04-08T08:47:24+0200] [ALPM] running 'gtk-query-immodules-3.0.hook'...
[2026-04-08T08:47:25+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-04-08T08:47:27+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-04-08T08:47:27+0200] [ALPM] running 'xorg-mkfontscale.hook'...
Pour le journal de démarrage : malheureusement le système de journalisation ne semble plus fonctionner et il n'y a pas de journal des démarrages qui échouent, les dernières traces datent d'avant la mise à jour. Existe-t-il un système de secours pour recueillir les messages qui s'affichent dans la console au démarrage par exemple ? Ou autre chose qui ne dépende pas du système de journalisation ? Ça défile rapidement et tout ce que je parviens à lire ce sont des « [Failed] » concernant la journalisation.
papajoke
Elfe
Messages : 833 Inscription : sam. 30 août 2014, 19:54
Message
par papajoke ven. 10 avr. 2026, 15:15
bonjour
Arch stable - Kde plasma / fish
syll
Daikyu
Messages : 79 Inscription : sam. 01 déc. 2007, 18:33Localisation : Toulouse
Message
par syll ven. 10 avr. 2026, 15:37
Je peux monter une cage sur la carte micro-sd depuis un système x86 64 bits même si la carte est destinée à un système arm 32 bits, ça ne pose aucun problème ?
benjarobin
Maître du Kyudo
Messages : 17779 Inscription : sam. 30 mai 2009, 15:48Localisation : Lyon
Message
par benjarobin ven. 10 avr. 2026, 18:03
Je ne suis pas sûr de comprendre ton dernier message.
syll
Daikyu
Messages : 79 Inscription : sam. 01 déc. 2007, 18:33Localisation : Toulouse
Message
par syll sam. 11 avr. 2026, 08:49
Je ne suis pas sûr de comprendre ton dernier message.
Je me demandais si monter une cage qui contient des fichiers pour une autre architecture fonctionnait.
Si tu peux connecter le lien série de ton rasperry pi à ton PC, tu pourras avoir les logs lors du démarrage.
Comment faire ça ?
benjarobin
Maître du Kyudo
Messages : 17779 Inscription : sam. 30 mai 2009, 15:48Localisation : Lyon
Message
par benjarobin sam. 11 avr. 2026, 09:02
Je ne comprends pas ce que tu entends par "monter une cage". Tu peux bien sûr monter le système de fichier du RPI depuis ton PC (en insérant la carte SD dans le PC), mais tu ne pourras pas exécuter d'application (donc pas de chroot).
Pour le lien série, tu peux regarder ce
lien qui explique plutôt bien l'idée.
Tu peux aussi regarder ce
lien , tu dois avoir
enable_uart=1 dans le fichier
/boot/config.txt
Tu dois connecter l'UART sur les pins 8 (GPIO 14) et 10 (GPIO 15), et connecter la masse sur la pin 6 tel qu'indiqué ici :
https://pinout.xyz/pinout/uart
Tu as besoin d'un lien UART compatible, en logic 3.3V, typiquement quelque chose comme
cela
syll
Daikyu
Messages : 79 Inscription : sam. 01 déc. 2007, 18:33Localisation : Toulouse
Message
par syll sam. 11 avr. 2026, 09:24
Je ne comprends pas ce que tu entends par "monter une cage". Tu peux bien sûr monter le système de fichier du RPI depuis ton PC, mais tu ne pourras pas exécuter d'application (donc pas de chroot).
D'accord. J'étais parti sur la suggestion de papajoke de revenir à la version précédente de systemd, mais pour ça il faudrait pouvoir exécuter quelque chose dans la cage ?
Pour le lien série je n'ai pas le matériel...
